Document	Document Title
US07702752B2	Method and apparatus for redirection of server external hyper-link references A message is provided to a tracking server system in response to a client system referencing a predetermined resource locator that corresponds to a resource external to the tracking server system. The tracking server system indirectly provides for the client system to have an informational element selectable by the client system, where the informational element is graphically identified on the client system with informational content obtainable from a content server system through use of a content resource locator. The informational element includes a tracking resource locator, referencing the tracking server system, and data identifying the informational element. The selection of the informational element causes the client system to use the tracking resource locator to provide the data to the tracking server system and to use the content resource locator to obtain the informational content from the content server system.
US07702750B2	System and method for event detection and re-direction over a network using a presentation level protocol A mechanism for detecting events generated from a device in communication with a client system and the re-direction of those events to a server system over a network using a presentation-level protocol is disclosed. Plug and play events are detected at the client system, bound to a virtual connection for a user session, and re-directed for handling to a server-based system using the presentation-level protocol. The server-based system maps the device to the user session. Applications which have registered a callback with the session are informed and generate an appropriate message which is transmitted to the device in communication with the client system via a specified virtual communication connection in the user session.
US07702746B2	Web services response templates Provided is a Web Services Response Template (WSRT) that addresses the problems of efficiency and robustness to change in Web Services response by allowing a requestor to explicitly specify, in a response template what information is to be returned by the request. A requestor of a web service gets just the information it needs; different requestors of the same operation may get different information; and a responder sends the requestor only what is asked for so there is no problem when new information becomes available. WSRTs are specifically designed to allow the type of control needed in program-to-program (P2P) communication, while being very efficiently and simply processed by a web service. Thus, WSRTs address difficulties that arise in typical distributed, P2P communication without adding much overhead or complexity to either a service requester or a service provider. The efficiency and flexibility afforded by WSRTs is essential to emerging enterprise architectures based on SOA (Service Oriented Architecture).
US07702745B2	Persistent caching directory level support The present invention provides a novel client side caching (CSC) infrastructure that supports transition states at the directory level to facilitate a seamless operation across connectivity states between client and remote server. More specifically, persistent caching is performed to safeguard the user (e.g., client) and/or the client applications across connectivity interruptions and/or bandwidth changes. This is accomplished in part by caching to a client data store the desirable file(s) together with the appropriate file access parameters. Moreover, the client maintains access to cached files during periods of disconnect. Furthermore, portions of a path can be offline while other portions upstream can remain online. CSC operates on the logical path which cooperates with DFS which operates on the physical path to keep track of files cached, accessed and changes in the directories. In addition, truth on the client is facilitated whether or not a conflict of file copies exists.
US07702741B2	Configuring or reconfiguring a multi-master information sharing environment Configuring an n-way multi-master information sharing topology. Adding a new node (e.g., database server) to the information sharing topology can be implemented as follows. Initially, the new node is added as a slave of a particular co-master in the information sharing topology. The objects to replicate are instantiated on the new node by propagating data from the particular co-master to the new node. Furthermore, a capture process is created on the particular co-master to send changes to the objects to the slave. Meanwhile, the co-masters continue to propagate changes to each other. To promote the slave to a master, changes to objects stored at the slave are propagated to each of the co-masters. Furthermore, changes at each of the masters are propagated to the promoted node.
US07702733B2	Low power email functionality for an electronic device Low power email capabilities are provided for an electronic device, such as a hand-held portable computer having capability to operate an application during a low power mode. During the low power mode, portions of hardware, software, services, and/or other components of the portable computer that are not necessary for email-related operations, such as polling a server for new email, are suspended or otherwise deactivated. At least a portion of a new email is stored in a memory of a low power display module (LPDM) of the portable computer. The LPDM is provided with its own low-power processing unit, user interface, and other components to allow access to and manipulation of the stored email while other components of the portable computer remain deactivated.
US07702730B2	Systems and methods for collaboration In some embodiments, the disclosed systems and methods provide a client-server infrastructure capable of supporting a variety of asynchronous and synchronous collaboration activities in a so-called collaboration place. Some of these activities include chatting, viewing and/or editing one or more data files, and sharing one or more applications, data files, and/or displays. The client-server infrastructure supports seamless navigation between the supported asynchronous and synchronous activities in the collaboration place. Additionally, the client-server architecture supports data persistence, so that data files associated with the collaboration place can be stored for subsequent access.
US07702727B2	Apparatus, method, and computer program for providing multimedia prompting in a communication system A multimedia prompting apparatus, method, and computer program generate and provide a dynamic multimedia prompt to a video client. The dynamic multimedia prompt includes at least two video clips. The multimedia prompting apparatus, method, and computer program generate the dynamic multimedia prompt by selecting at least one of the video clips based at least partially on information provided by the video client.
US07702725B2	Digital object repositories, models, protocol, apparatus, methods and software and data structures, relating thereto A method of providing internet access to a data object repository comprising managing data objects hosted by said repository using a generalised repository directed graph data model having object nodes and resources, said resources comprising at least one of (i) a literal; (ii) actual resource data; and/or (iii) a URI directing a request for resources to an address; wherein said object nodes comprise higher level abstractions of data objects; wherein all object nodes and resources are named, as well as all arcs between object nodes and other object nodes or resources, said arcs modelling properties of said nodes; wherein each said directed graph has a graph interface which represents data as a directed graph of nodes and resources; and wherein said graph interface is capable of enabling access to data represented by said directed graph by traversal of said directed graph using http:GET.
US07702718B2	Providing enterprise information Separate executable agents each perform tasks on associated information that is changing over time, to produce current information, Inputs and outputs are delivered among agents to enable assembly of a body of aggregated and summarized management information, based on the current information, to be used to manage at least a portion of an enterprise.
US07702715B2	Division arithmatic unit of variable radix A variable radix divider uses dividend, divisor and quotient as division operators and includes an adder/subtractor having inputs of the dividend and the divisor. The divider further includes a first and second quotient/radix generator having inputs of the dividend and the divisor, a first multiplexer having input of the output from the first quotient/radix generator, and a second multiplexer having input of the output from the second quotient/radix generator. The first and second generators each includes a prediction adder/subtractor having inputs of bits in prediction range of the dividend and bits in prediction range of the divisor, a radix generator, and a quotient generator. The radix generator and the quotient generator have input of the output of the prediction adder/subtractor. The divider iterates a recursive cycle operation until the division operation through a feedback path to the dividend is completed. The first and second multiplexer have input of the output of the adder/subtractor and determine in advance which one is to be the quotient and which one is to be the radix with respect to potential scenarios during the adder/subtractor is in operation.
US07702694B1	System and method for organizing managing and accessing large quantities of data from non-homogenous data sources A method, system, and computer readable medium for organizing, managing, and accessing large quantities of data in a centralized database received from a plurality of non-homogenous data sources. In the method, a specific format is defined for storing the received data in a plurality of data records in the centralized database. A plurality of datasets are created including a definition and a translation for each data item, the plurality of datasets establishing the data that is transferred into or out of the centralized database. The plurality of datasets are stored in the centralized database. A plurality of value tags are created defining a plurality of data formats and database column names to use in importing or exporting data. An inbound interface is created for accepting data from the plurality of non-homogenous data sources wherein the data represent measured values of physical resources. An outbound interface is created for exporting data upon request to an external application.
US07702691B2	Systems and methods for EJB finders using SQL A system and method to support querying of a software object comprises a software object finder that can query a plurality of different databases using a plurality of queries in different query language. A matched data entity from the plurality of databases is mapped into one or more instances of the software object stored in a result set. The system also supports pre-fetching of related software objects of a software object from different databases into a cache using queries in different query languages.
US07702689B2	Systems and methods for querying metamodel data A system and method for querying metamodel data is provided. In one embodiment, the method includes receiving, at a computer, a query indicator, the query indicator defining a type of query for a value in the metamodel data; performing, based on the query indicator, the query for the value by searching a first set of parent and child nodes and recursively querying the metamodel data to identify the value in another set of parent and child nodes; and providing, as a result, the value and at least one of the nodes from the sets of parent and child nodes.
US07702688B2	Predictive data search A method for searching for data files stored in a mobile device is provided. The method includes accessing a memory including a plurality of data files, wherein each of the data files includes a file information field containing a character string. The method also includes retrieving, directly from the data files, at least a first part of the file information field associated with the data files. The method also includes presenting the at least first part of the file information field via a display. The method also includes determining a first diverging character position among the character strings in the presented at least first part of the file information field associated with each of the data files. The method also includes receiving, via an input device, an input corresponding to at least one symbol. The method also includes comparing the at least one symbol to each of the characters in the first diverging character position. The method also includes presenting, based on a result of the comparing, at least a second part of the file information field associated with select ones of the data files which include a character, in the first diverging character position of the at least first part of the file information field, that matches the at least one symbol.
US07702684B2	Presenting digitized content on a network using a cross-linked layer of electronic documents derived from a relational database In an embodiment, a computer system comprises one or more content file servers having recorded thereon a plurality of digital content material items, and a plurality of digital graphical image files comprising graphical images associated with the content material items; wherein each of content material items comprises one or more data files of digitized electronic printed, audio, or video content material; one or more navigation page servers each comprising: one or more storage devices having recorded thereon a plurality of navigation page templates; a database comprising stored descriptive information about the content material items, including hierarchical and other relationships both between different content material items and between different subcomponents of content material items; logic encoded on the one or more storage devices and when executed operable to perform: receiving a request to view a particular navigation page, comprising a dynamically-generated electronic document; selecting one of the navigation page templates based on the request; creating and sending to the database, one or more queries for the descriptive information relating to the particular navigation page; receiving one or more results to the queries; generating, based on the one or more results, a particular navigation page comprising descriptive information about one or more of the content material items, portions thereof, or abstract collections thereof; a plurality of links to other such navigation pages; and zero or more links to particular content material items or portions thereof; sending only the particular navigation page to a client computer.
US07702665B2	Methods and apparatus for evaluating semantic proximity Methods and apparatus to evaluate the semantic proximity between reference free-form text entry and a candidate free-form text request.
US07702661B2	Managing checked out files in a source control repository A system and method for managing at least one checked out file of a source control management repository are provided. The system includes a source control repository including at least one checked out file; a database including at least one parameter associated with the at least one checked out file; and a computing device for identifying the at least one checked out file, retrieving the at least one parameter associated with the at least one checked out file, and generating a report including the at least one parameter. The report may be presented to a user via a display or formatted as an XML file to be employed in other computing applications, e.g., automated backups.
US07702651B1	Spatially defined universal dates Methods and apparatus for converting a date using spatial information. In one implementation, a method of converting date information using spatial information includes: storing date information in a storage format; receiving target spatial information; retrieving a target format indicator matching the received target spatial information, where the retrieved target format indicator indicates a target format based on a target calendar system; and converting the date information from the storage format to the target format.
US07702645B2	Method, apparatus and computer program product for making semantic annotations for easy file organization and search A device for generating semantic folder annotations is provided. The device includes a semantic folder editor which enables a user to create attribute-value pairs corresponding to a semantic folder(s). The device is capable of downloading ontolog(ies) and associated data from an ontology server which may be utilized to determine relationships between the attribute-value pairs created by the user. The device includes an annotations generator which specifies the semantic folder descriptions of the semantic folders based on attribute-value relationships determined by the ontolog(ies). The device is capable of allowing a user to insert an object(s) into a semantic folder(s) and the annotations generator assigns all attribute-value pairs corresponding to the semantic folder to the object(s). The annotations assigned to object(s) may be stored in a semantic triple store. The device further includes a search engine which may be employed by a user to search semantic folders to locate an object(s).
US07702636B1	Federated system and methods and mechanisms of implementing and using such a system A federated system and methods and mechanisms of implementing and using such a system is disclosed. In some embodiments, one or more mappings are created between a taxonomy view at a node and one or more taxonomies of one or more data sources. The one or more data sources can then be accessed via the taxonomy view. In other embodiments, one or more mappings are created between content from different data sources and content from those data sources are merged using the one or more mappings.
US07702631B1	Method and system to produce and train composite similarity functions for product normalization A method and system to produce and train composite similarity functions for record linkage problems, including product normalization problems, is disclosed. In one embodiment, for a group of products in a plurality of products, a composite similarity function is constructed for the group of products from a weighted set of basis similarity functions. Training records are used to calculate the weights in the weighted set of basis similarity functions in the composite similarity function for the group of products. In another embodiment, a composite similarity function is applied to pairs of training records. The application of the composite similarity function provides a number that can be used to indicate whether two records relate to a common subject. The composite similarity function includes a weighted set of basis similarity functions. A perceptron algorithm is used to modify the weights in the weighted set.
US07702625B2	Building a unified query that spans heterogeneous environments A unified query building system generates a source structure comprising nodes from a data structure input of an identified data source, displays the generated source structure in a logical view, adds a selected node or element from the nodes to a design query canvas, generates a query object from the selected node based on a source type of the selected node, presents a logical view of a query function of a selected query object, and generates a unified query comprising the generated query objects. The logical view is displayed in a graphical user interface comprising a design query canvas comprising grids corresponding to functions in a query language such as SQL or XML. The generated unified query is displayed in an actual query view and is outlined in a query outline view.
US07702603B1	Constructing an agent that utilizes a compiled set of canonical rules A method for constructing an agent in a first execution environment that utilizes a set of compiled, canonical rules, comprising requesting a canonical rule set for the agent, compiling the rule set and supplying the agent with the compiled rule set.
US07702600B2	Systems and methods for clinical decision crawler agent Certain embodiments of the present invention provide a system for clinical decision support including a crawler agent component. The crawler agent component is adapted to receive a search parameter. The search parameter specifies a criteria for evidence data to be searched for. The crawler agent component is adapted to initiate a search of a plurality of evidence sources based at least in part on the search parameter. The search identifies the evidence data. The evidence data is utilized by the clinical decision support system to provide decision support to a healthcare provider for a patient.
US07702599B2	System and method for cognitive memory and auto-associative neural network based pattern recognition Designs for cognitive memory systems storing input data, images, or patterns, and retrieving it without knowledge of where stored when cognitive memory is prompted by query pattern that is related to sought stored pattern. Retrieval system of cognitive memory uses autoassociative neural networks and techniques for pre-processing query pattern to establish relationship between query pattern and sought stored pattern, to locate sought pattern, and to retrieve it and ancillary data. Cognitive memory, when connected to computer or information appliance introduces computational architecture that applies to systems and methods for navigation, location and recognition of objects in images, character recognition, facial recognition, medical analysis and diagnosis, video image analysis, and to photographic search engines that when prompted with a query photograph containing faces and objects will retrieve related photographs stored in computer or other information appliance, and will identify URL's of related photographs and documents stored on the World Wide Web.
US07702596B2	Probabilistic boosting tree framework for learning discriminative models A probabilistic boosting tree framework for computing two-class and multi-class discriminative models is disclosed. In the learning stage, the probabilistic boosting tree (PBT) automatically constructs a tree in which each node combines a number of weak classifiers (e.g., evidence, knowledge) into a strong classifier or conditional posterior probability. The PBT approaches the target posterior distribution by data augmentation (e.g., tree expansion) through a divide-and-conquer strategy. In the testing stage, the conditional probability is computed at each tree node based on the learned classifier which guides the probability propagation in its sub-trees. The top node of the tree therefore outputs the overall posterior probability by integrating the probabilities gathered from its sub-trees. In the training stage, a tree is recursively constructed in which each tree node is a strong classifier. The input training set is divided into two new sets, left and right ones, according to the learned classifier. Each set is then used to train the left and right sub-trees recursively.
US07702595B2	Nucleotide sequence screening A system for screening nucleotide sequences, a method therefor, a program, a recording medium, and a server on which the screening of nucleotide sequences is executed. The solution comprises a step of storing target nucleotide sequence data and a probe nucleotide sequence, a step of generating complementary sequence data from a probe nucleotide sequence that may be bound to the target nucleotide sequence, and storing a maximum acceptable edit distance between the target nucleotide sequence and the probe nucleotide sequence, a step of reading out each nucleotide sequence data and the maximum edit distance from each storing unit, and evaluating the binding possibility of the target nucleotide sequence data and the complementary sequence data in descending order of edit distance, and a step of storing the result of the binding evaluation in a storage unit.
US07702581B2	Method and system for initiating and/or conducting a transaction that is associated with at least two corresponding declarations of intent The present invention relates to a method and a system for initiating and/or conducting a transaction that is associated with at least two corresponding declarations of intent, in particular a payment transaction, between at least two transaction parties via a processing unit (3), in which payment transaction at least one of the transaction parties uses a land line telephone or mobile telephone (1, 2) or a mobile communications device for transmitting data. The method is characterized by the transmission of data to the processing unit by at least two transaction parties within a limited time frame, and by the fact that the initiation of the data transmission of these transaction parties is effected actively by the transaction parties and not by the processing unit (3), while the data transmitted during initiation contain features that enable correlating the declarations of intent with one another.
US07702573B2	Debt reduction method and device thereof In a method which is performed using a communication network and uses a derivative to reduce a money debt such as a housing loan debt, a loan debt, a nation/public/corporate bond debt, a lease debt, or a payment obligation including insurance benefits, a derivative corresponding to a period of the debt and a condition is set up by a bond, a stock, a currency, an exchange, an interest rate, a spot such as a commodity and/or an index, and a price singly or by combining them, and in case of necessity, the derivative is divided into small lots to conform to an amount of the debt and the condition, this is purchased by a debtor of the debt at a relatively small premium, and when the derivative produces a profit, this is sold to realize the profit, alternately, reference is made to a present value of the debt and when a profit is produced in the money debt, a swap is made to realize the profit, and the debt is reduced by the profit.
US07702569B1	System and method for icon oriented representation of trading strategies A system and method for visually establishing a trading strategy are described. According to one method, a trader can position a first icon corresponding to a first order and a second icon corresponding to a second order in relation to a first value axis displayed on a graphical interface. A graphical means can also be used in relation to the icons to show that the icons correspond to a trading strategy. The graphical means can include lines, numbers, or any other user-configurable graphical representation illustrating order precedence, for example.
US07702565B2	Reverse billing in online search There is disclosed reverse billing in online search. A telephony server may receive a request from a user to cause a telephone call to be established between the user and a merchant. A notice to the merchant may be generated. The notice may include an offer to establish a telephone call with the user in exchange for payment of a definite fee. An acceptance of the offer may be received from the merchant to a phone number associated with the merchant. A first voice communication leg with the user and a second voice communication leg with the merchant may be bridged to establish the telephone call between the user and the merchant. The definite fee may be appear on the merchant's bill for telephone service.
US07702561B2	Automatic method for generating a mathematical program to identify an optimal all-or-nothing bid set for procurement-related reverse auctions A method is provided for identifying a cost-minimizing bid set in a reverse combinatorial auction subject to various business rules for all-or-nothing bundled bids. The method includes introducing a decision variable for each bid, introducing a counting variable to indicate whether bids from a supplier are chosen in an optimal bid set, modeling demand constraints for each item using the bid variables, modeling minimum and maximum numbers of suppliers based on the counting variables, introducing dummy variables to ensure existence of feasible solutions, for a given cost formulating an objective of choosing bids that arrive early based on an additional timestamped objective with the given cost level as a constraint, and introducing price modifications to handle the formulated objective of choosing bids that arrive early.
US07702560B1	System and method for interactive offer system A networked computer arrangement and method for preparing entitled offerings to prospective brokers, buyers and bidders, by establishing an entitlement schema in an offering and bid collection computer system based on a contractual arrangement between the brokers, traders, and offeror; preparing an entitled offering through filtering the a master list according to the broker schema to include only information for items to which each broker is allowed to purchase: and, subsequently. but prior to receiving any bids, presenting via a user interface the entitled offerings to the prospective brokers such that each broker may review entitled offerings containing information regarding items being offered for sale on which the broker is entitled to bid, but are not allowed to view information regarding items to which each broker is not entitled to purchase.
US07702555B1	Vintage maturation analytics for predicting behavior and projecting cash flow for customer communities and their responses to economic, competitive, or management changes A method predicts vintage behavior. The method receives a first set of data, the first set of data being based on at least one of a first factor and a second factor. The first factor includes a factor related to vintage maturation. The second factor includes a factor not related to vintage maturation. The method determines a second set of data and a third set of data based on the first set of data, the second set of data being based on the first factor, and the third set of data being based on the second factor. The method then predicts vintage behavior based on at least one of the second set of data and the third set of data.
US07702551B2	Method and system for copying equity and debt financing terms, from one of a variety of securities, selectively and or aggregately, in a quantitative manner that enables rapid visualizing, comparing and viewing of the financial impact of copied terms in hypothetical or actual liquidation, public offering, financing or other scenarios A method and system enables copying of equity and debt financing terms, from one of a variety of securities, selectively and or aggregately, in a manner that enables rapid visualizing, comparing and viewing of the financial impact of copied terms in a hypothetical or actual liquidation, public offering, financing or other financial scenarios.
US07702550B2	Multiple computer system supporting a private constant-dollar financial product Computers and data processing systems, especially pertaining to a constant-dollar financial product. Exemplary implementations include, a machine, a method for use and method for making, and corresponding products produced thereby, as well as data structures, computer-readable media tangibly embodying program instructions, manufactures, and necessary intermediates of the foregoing. Respectively, computers can use private, constant-dollar financial product data and nominal dollar data corresponding thereto, and communicate so as to cooperate (e.g., including transmit, receive) in computing a constant dollar to nominal dollar conversion for a financial product, the computers generating different output.
US07702547B2	Calculating and displaying interest avoided by use of a particular interest calculation method Systems, methods, and computer program products for presenting, on a statement associated with a financial transaction instrument, an amount of interest avoided during a statement period. A first interest amount is computed for the statement period according to a first interest calculation method, the first interest amount being an interest amount actually billed to the transaction instrument account holder. A second interest amount is computed for the statement period according to a second interest calculation method. An amount of interest avoided for the statement period is computed by taking a difference of the first interest amount and the second interest amount. The amount of interest avoided for the statement period is displayed on the statement, whereby the holder of the transaction instrument is informed as to the amount of interest avoided by use of the first interest calculation method, rather than the second interest calculation method.
US07702541B2	Targeted e-commerce system A system for displaying products for purchase on any document displayed on any computer device, comprising conducting a statistical frequency analysis of the word occurrence in the document to determine the primary subject matter of the document and/or keywords in the document, selecting products which are relevant to the subject matter and keywords of the document, either by manual selection or by automatic selection. Automatic selection is accomplished by conducting a statistical frequency analysis of the word occurrence in the product descriptions to determine the keywords in the product descriptions and matching the keywords from the document with the keywords from the product descriptions.
US07702538B2	System and method for transponder-enabled account transactions A transponder-initiated transaction system is electromagnetically coupled to an account transponder device at the point of sale. The account transponder device may be embedded within a watch, key chain or other personal article for convenience or affinity. The transponder device may communicate account information to an RF-enabled point of sale device, enabling transactions to take place without resort to remote data processing facilities. In other embodiments partial or complete account information may be accessed or stored at co-located or remote sources. New account registrants may access a Web site to enter a transponder ID and activate a new account, which may be a credit account, debit account, cash account, special purpose vending account, or other types of accounts.
US07702530B2	Systems and methods for consumers to purchase health care and related products A method of selling a health related product or service via the Internet provides a service provider system that includes a web server. The service provider system has members that purchase health related products and services through the service provider system. Applicants are enrolled in the service provider system as members. A product or service request message is received for a desired product or service from a member through a customer interface. The product or service request message includes a product or service identifier. The service provider system transmits a request for the desired product or service request to a supplier of the desired product or service. Points are recorded within a computer memory awarded to a member for purchases made by the member through the service provider system.
US07702527B1	Techniques for illustrating and analyzing long term health care expenses A computer-executable method for financial retirement planning that provides a comparative evaluation of a plurality of health care funding alternatives. The comparative evaluation enables individuals to select one or more funding alternatives appropriate to their particular set of circumstances. The method commences by calculating overall cash flow for an individual, a couple, and/or a family during retirement. Based upon this cash flow, an amount representing an affordable heath care insurance premium is determined. Next, a comparison of projected retirement finances is provided. This comparison provides (a) financial projections assuming that long-term health care will not be required, (b) financial projections if long-term health care is required, but the individual is not covered by insurance, and (c) financial projections if long-term health care is required, and the individual is covered by insurance. The financial projections include a level of attainable retirement spending per week, month, and/or year. Optionally, the projections include a low-cost estimate, an average cost estimate, and a high-cost estimate for the expenses of long-term health care and/or health care insurance.
US07702524B1	Method and system for online secure patient referral system The present invention provides a system and method, relating to the transfer of patient files over a secure, HIPAA compliant, patient file transfer and outpatient order system and a computer site therefore. The method includes obtaining and compiling a patient record pertaining to a patient; electronically inputting the patient record obtained into a secure computer database containing other patient records, allowing physician access to the patient record wherein the access includes allowing the physician to order outpatient services and send part of the patient information, including certain defined fields for a complete record and to send and receive referrals including certain defined fields for a complete record.
US07702514B2	Adjustment of scale factors in a perceptual audio coder based on cumulative total buffer space used and mean subband intensities A method for audio encoding includes: analyzing an audio frame using a psychoacoustic model to obtain a corresponding masking curve and window information; transforming the audio frame according to the window information to obtain a spectrum, and dividing the spectrum into a plurality of frequency sub-bands; estimating a scale factor for each frequency sub-band; quantizing the frequency sub-bands; encoding the quantized frequency sub-bands; and packing the encoded frequency sub-bands and side information into an audio stream. Each scale factor is estimated based on a quantizable audio intensity of each frequency sub-band, which is adjusted according to a cumulative total amount of buffer space used for storing the encoded frequency sub-bands and an amount of buffer space used for storing a previously encoded audio frame, and a mean of intensities of all signals in the corresponding frequency sub-band and spectrum position of the corresponding frequency sub-band.
US07702511B2	Watermarking to convey auxiliary information, and media embodying same The present invention related generally to audio encoding and decoding. Various arrangements are disclosed. One method obtains audio, wherein authorized or original audio comprises in-band information and associated out-of-band information; searches for out-of-band information associated with obtained audio; searches the obtain audio for in-band information associated with the obtained audio; and based at least in part on a result of the searching for out-of-band information and the searching the obtained audio for in-band information, reaches a decision regarding the obtained audio. Other arrangements are disclosed as well.
US07702510B2	System and method for dynamically selecting among TTS systems Systems and methods for dynamically selecting among text-to-speech (TTS) systems. Exemplary embodiments of the systems and methods include identifying text for converting into a speech waveform, synthesizing said text by three TTS systems, generating a candidate waveform from each of the three systems, generating a score from each of the three systems, comparing each of the three scores, selecting a score based on a criteria and selecting one of the three waveforms based on the selected of the three scores.
US07702508B2	System and method for natural language processing of query answers Candidate answers responsive to a user query are analyzed using a natural language engine to determine appropriate answers from an electronic database. The system and methods are useful for Internet based search engines, as well as distributed speech recognition systems such as a client-server system. The latter are typically implemented on an intranet or over the Internet based on user queries at his/her computer, a PDA, or a workstation using a speech input interface.
US07702506B2	Conversation assisting device and conversation assisting method An object of the present invention is to provide a conversation support apparatus and a conversation support method that allow users to effectively and smoothly onverse with each other. According to the present invention, since a first display section 22 and a second display section 32 can be placed at different angles, while a first user is watching the second display section 32 and a second user is watching the first display section 22, they can smoothly converse with each other. Since the first display section 22 and the second display section 32 are disposed, for example the second user and the first user can face-to-face converse with each other.
US07702505B2	Channel normalization apparatus and method for robust speech recognition A channel normalization apparatus includes: a characteristic extraction unit extracting MFCC characteristics and outputting rows of frames according to time; a characteristic parameter average calculation unit calculating an average value of the rows of the outputted MFCC characteristics; a channel variation estimation unit configuring a codebook based on a database of speech signals with attenuated channel variations and estimating a channel variation for each frame by calculating a distance between a MFCC parameter for each frame and an individual median value of the codebook when a MFCC of a channel distorted speech signal is inputted; and a smoothing operation based channel normalization unit smoothing another average value of the channel variation from the characteristic parameter average calculation unit and the channel variation from the channel variation estimation unit, subtracting the other average value from the MFCC of each frame and outputting rows of channel normalized MFCC characteristics.
US07702503B2	Voice model for speech processing based on ordered average ranks of spectral features Methods and arrangements for generating a voice model in speech processing. Upon accepting at least two input vectors with spectral features, vectors of ranks are created via ranking values of the spectral features of each input vector, ordered vectors are created via arranging the values of each input vector according to rank, and a vector of ordered average values is created via determining the average of corresponding values of the ordered vectors. Thence, a vector of ordered average ranks is created via determining the sum or average of the vectors of ranks, a vector of ordered ranks is created via ranking the values of the ordered average ranks and a spectral feature vector is created via employing the rank order represented by the vector of ordered ranks to reorder the vector of ordered average ranks.
US07702490B1	Method and system for adaptive mesh-free shell structures A method, system and computer program product pertained to adaptive discretization refinement of shell structure is disclosed. The adaptive mesh-free model is based on a technique for dividing the critical area into a finer model. The present invention is a method for enabling adaptive mesh-free shell structure in a time-domain analysis, the method comprises: defining the mesh-free shell structure by a structural geometry description file including a plurality of nodes and a reference 3-D mesh, which includes a plurality of shell elements, mapping the 3-D reference mesh into a 2-D parametric plane, wherein the 2-D parametric mesh includes a plurality of integration cells corresponding to the plurality of shell elements, solving structural responses at current solution cycle using mesh-free mathematical approximations pertaining to each of the plurality of integration cells, performing adaptive discretization refinement for the plurality of the integration cells.
US07702488B2	Measuring device for capacitive pressure measure A measuring device is disclosed for capacitive pressure and/or temperature measurement, particularly for tire pressure control systems, having at least one sensor, which has a capacitive measuring element to detect a state value, which is applied at an output-side measuring node of the measuring element, with at least one A/D converter operating according to the dual-slope method, with a charging/discharging circuit, for mutual charging and discharging of the measuring element and for generating a sawtooth-shaped measuring potential at the measuring node as a measure for the capacitance of the measuring element, with a period counter, which determines the periods of the measuring potential, and with a clock counter, which determines the cycles of a clock signal, which lie within the duration of at least one period of the measuring potential. The invention relates to a measuring method for capacitive pressure and/or temperature measurement.
US07702483B2	Position control on bottom layers with image processing A method for the attachment or introduction of valve or cover sheets, imprints, coatings and/or embossings in the correct position on or in components of tube pieces has several process steps. The steps include (a) recording of images of the components of several tube pieces with attached or introduced valve or cover sheets, imprints, coatings and/or embossings, (b) determining the positions of the valve or cover sheets, imprints, coatings and/or embossings relative to a reference point of the components of the tube pieces, (c) calculating the deviation of the determined position from the target position and (d) changing the positions of the valve or cover sheets and components of the tube pieces by a value that follows from the calculated deviation.
US07702473B2	Submersible portable in-situ automated water quality biomonitoring apparatus and method A submersible biomonitoring system for monitoring water quality in situ includes a submersible chamber constructed of a di-electric material and sized to allow suitable signals from one or more aquatic organisms to be received by eliminating cross-talk between cells while allowing ambient conditions to be maintained inside the chamber. The aquatic organism exhibits ventilatory behavior and body movement sensitive to water quality which manifest as electrical signals picked up by electrodes and communicated to a pre-amplifier that conditions the signals for communication to a land-based amplifier and/or controller that is used to interpret the signals to determine when the water to which the organism is exposed has caused physiological stress to the organism.
US07702469B2	Systems and methods for predicting an individual's risk of developing rheumatoid arthritis Methods for predicting the likelihood of development of rheumatoid arthritis for individuals that present with recent-onset undifferentiated arthritis. The methods are based on the determination of a set of clinical parameter values and determining a predicted risk for developing rheumatoid arthritis by correlating the parameter values with predefined risk values associated with ranges of parameter values. Parameters values that are decisive for the risk for developing rheumatoid arthritis may include serum levels of C-reactive protein, Rheumatoid factors, anti-CCP antibodies, as well as age, gender, localization of the joint complaints, length of morning stiffness, and number of tender and/or swollen joints. The method may be performed by a computer. The invention further relates to a computer, a sample analyser and a computer program product for performing the method and a data carrier with the computer program product.
US07702467B2	Molecular property modeling using ranking Methods and articles of manufacture for modeling molecular properties using data regarding the partial orderings of compound properties, or by considering measurements of compound properties in terms of partial orderings are disclosed. One embodiment provides for constructing such partial orderings from data that is not already in an ordered form by processing training data to produce a partial ordering of the compounds with respect to a property of interest. Another embodiment of the invention may process the modified training data to construct a model that predicts the property of interest for arbitrary compounds.
US07702464B1	Method and apparatus for codon determining Computer processing methods and/or systems for minimizing and/or optimizing data strings in accordance with rules and options. Minimized data strings can represent data sequences important in certain biologic analyses and/or syntheses. In specific embodiments, a request is generated by a user at a client system and received by a server system. The server system accesses initial data indicated or provided by the client system. The server system then performs an analysis to minimize the data needed for further reactions. In specific embodiments, a server can use proprietary methods or data at the server side while protecting those proprietary methods and data from access by the client system.
US07702458B2	Method and apparatus for entering street name A method and apparatus for a navigation system for inputting a street name allows a user to quickly find a desired street name even when the user inputs an incorrect prefix or suffix of the street name. The navigation system accepts a street name based on either a base name input method or a full name input method in the same input field while performing a street name search mostly based on a base name of the street name. The method and apparatus hints an inexperienced user the distinction between the base name and other components of the street name so that the user knows that non-base name element is unnecessary for finding the correct address of the destination.
US07702454B2	Presenting a travel route Techniques are provided for presenting a route using a route presentation that provides both a context map and one or more detail route maps. Narrative instructions for the route also may be presented. The presentation of the context map and the one or more detail route maps may be interactive. The route presentation also may be user controllable such that a user may control the portions of a route that are printed. The route presentation also may include a re-routing feature that allows a user to request that a new route be identified that avoids a particular maneuver or maneuvers in a route.
US07702445B2	Control system and method for controlling the driving-away manoeuvre in a motor vehicle with a servo-controlled gearbox What is described is a control system for controlling the driving-away maneuver in a motor vehicle provided with a gearbox comprising a primary input shaft which can be coupled to a drive shaft of a propulsion system of the vehicle by means of a servo-assisted friction clutch, wherein a control unit receives at its input signals indicating a command imparted by the driver of the motor vehicle by operating the accelerator pedal, and generates—on the basis of a mathematical reference model—reference torque request signals indicating the reference torques requested from the drive shaft and from the friction clutch during the driving-away manoeuvre, and also generates—by comparison between signals indicating the estimated angular velocities of the drive shaft and of the primary gear shaft, and detected signals indicating the actual angular velocities of the drive shaft and of the primary gear shaft—corresponding corrective contributions, in such a way as to construct command signals for controlling torque actuator devices of the propulsion system and of the friction clutch, for controlling the driving-away manoeuvre in the motor vehicle.
US07702443B2	System for customizing responsiveness of a machine A control system for customizing a relationship between an operator input at an input controller and a corresponding response of a work machine is disclosed. The control system includes an input controller operable to receive an operator input and generate a corresponding control signal. The control system also includes a hand-held programmable device having parameters stored therein. The parameters are adjustable to control responsiveness of a component of the work machine over a range of inputs at the input controller. The hand-held programmable device is operable to adjust the parameters in response to an input from an operator. A control module is disposed on the work machine and is operable to receive signals from the hand-held programmable device. The signals are representative of a desired relationship between an operator input to the input controller and a corresponding response of the work machine. The control module is also operable to receive the control signal from the input controller and process the control signal based on the signals from the hand-held programmable device.
US07702439B2	Crash sensing via piezoelectric sensors A system and method for characterizing piezoelectric sensor responses for automotive vehicle crash analysis, is disclosed. The method employs Daubechies wavelet analysis (1006) to plot signal response amplitudes (1008) in three-dimensional space of at least one piezoelectric sensor. A cluster, signifying a combination of Daubechies amplitudes of the at least one piezoelectric sensor in three-dimensional space, is compared to reference clusters (1010) stored in the automotive vehicle. Based on results from comparing the cluster to the reference clusters, instructions are transmitted to an occupant restraint control system (1013) in the vehicle to deploy a specific airbag at a specific power level.
US07702434B2	Indicating apparatus for a motor vehicle A motor vehicle and an indicating apparatus for a motor vehicle, includes a display for optical depiction of information concerning the motor vehicle by the emission of light, and having a decorative layer positioned on the display.
US07702420B2	Method for making mobile unit accompany objective person A method for making a mobile unit accompany an objective person moves the mobile unit in correspondence with movement of the objective person and executes control so that the mobile unit moves along the walking direction of the objective person by detecting the foot landing of the objective person, detecting the walking speed and the walking direction of the objective person, and predicting the predictive walking range of the objective person on the basis of the detected information of the walking direction and the foot landing.
US07702417B2	Automatically generating code from drawing specifications for use in motion control System and method for utilizing drawing specifications for use in motion control. Elements in a drawing specification may be automatically identified. The drawing specification may include one or more drawings, digital files, AutoCAD drafting files, and/or drawing specifications. Code may be automatically generated based on the one or more elements in accordance with a schema, and may include instructions in a data representation language, e.g., a markup language such as HTML, XML, etc. The automatically generated code may include move operations, e.g., arc, contour, line, raise, lower, halt, begin, etc., with associated parameters, e.g., move constraints, digital outputs, position compares, etc. The schema may include one or more blocks, each associated with a portion of the drawing specification, one or more elements, each associated with a block, one or more move operations, each associated with an element, and one or more parameters, each associated with a move operation.
US07702407B2	Method for generating encoded audio signal and method for processing audio signal A method for generating an encoded audio signal, and a method for processing the same during the multi-channel C audio coding are disclosed. The present invention provides the method for generating an encoded audio signal comprising: including fixed channel configuration information acting as configuration information of a predetermined output channel; and including arbitrary channel configuration information.
US07702400B2	Motion controllers and simulation systems including motion controllers A motion controller including a computer comprising a primary processor or a central processing unit and an input/output communication bus. The primary processor is in communicative connection with the bus and is adapted to communicate with other devices in communicative connection with the bus via the bus. The motion controller also includes at least one secondary processor in communicative connection with the bus. The secondary processor is adapted to execute at least one control algorithm for one or more axes of motion associated therewith. The secondary processor is further adapted to communicate with other devices in communicative connection with the bus via the bus independently of the primary processor (that is, the secondary processor is can effect bus mastering). The operating system of the computer can, for example, be a general purpose operating system.
US07702396B2	Optimizing pitch allocation in a cochlear implant Errors in pitch allocation within a cochlear implant are corrected in order to provide a significant and profound improvement in the quality of sound perceived by the cochlear implant user. The disclosure provides a tool for determining the implant fitting curve for cochlear implant system to correct pitch warping. The method presents familiar musical tunes to determine the implant fitting slope (relative alignment). In addition, in one embodiment, speech sounds may be used to determine the offset of the fitting line (absolute alignment). The use of music and speech to determine the implant fitting curve (line) and the slope is facilitated by using techniques to implement virtual electrodes to more precisely direct stimuli to the location or “place” on the cochlea.
US07702395B2	Neurostimulator Methods and devices of stimulating nerves are disclosed. In one embodiment adapted for stimulating excitable tissue, the invention includes drive circuitry (12), an acoustic transducer (14) and a pair of electrodes (28).
US07702387B2	Tank filters adaptable for placement with a guide wire, in series with the lead wires or circuits of active medical devices to enhance MRI compatibility A tank filter is provided for a lead wire of an active medical device (AMD). The tank filter includes a capacitor in parallel with an inductor. The parallel capacitor and inductor are placed in series with the lead wire of the AMD, wherein values of capacitance and inductance are selected such that the tank filter is resonant at a selected frequency. A passageway through the tank filter permits selective slidable passage of a guide wire therethrough for locating the lead wire in an implantable position. The Q of the inductor may be relatively maximized and the Q of the capacitor may be relatively minimized to reduce the overall Q of the tank filter to attenuate current flow through the lead wire along a range of selected frequencies. In a preferred form, the tank filter is integrated into a TIP and/or RING electrode for an active implantable medical device.
US07702385B2	Electrode contact configurations for an implantable stimulator An exemplary implantable stimulator includes at least one electrode contact array and at least one additional electrode contact. Both the electrode contact array and the additional electrode contact are disposed on an external surface of the stimulator. The electrode contact array includes multiple electrode contacts that are configured to have a first polarity. The additional electrode is configured to have a second polarity. One or more of the electrode contacts disposed on the stimulator are configured to deliver monopolar stimulation and/or multipolar stimulation. Exemplary methods of stimulating a stimulation site within a patient include providing at least one electrode contact array and at least one additional electrode contact. Both the electrode contact array and the additional electrode contact are disposed on an external surface of the stimulator. The electrode contact array includes multiple electrode contacts that are configured to have a first polarity. The additional electrode is configured to have a second polarity. The method further includes applying an electrical stimulation current to the stimulation site via one or more of the electrode contacts that are disposed on the stimulator.
US07702383B2	Methodology for automated signal morphology analysis in implantable electrotherapy and diagnostic systems Systems and related methods for analyzing data sensed from a device implanted in a patient, such as a cardiac pacing system. The system detects and evaluates electric signals within the patient that share a common event marker. By using algorithms and graphical presentation of the collected signals having common event markers, deviations in signals over time can be identified and evaluated in consideration of taking further action related to the patient and the implanted device. The system can also be used in conjunction with an advanced patient management system that includes a programmer or repeater capable of gathering information from the implanted device and transmitting the data to a host via a communications network for evaluation at a remote location.
US07702375B2	Medical imaging apparatus illuminated to reduce patient anxiety A medical imaging examination apparatus has a front wall with an opening to a cylindrical examination area into which a patient to be examined can be moved, and has an illumination arrangement for the illumination of the front wall over a large surface. The illumination of the front wall reduces feelings of fear on the part of a patient, and thus simplifies conducting examinations using the examination apparatus.
US07702372B2	Battery cover assembly for portable electronic device A battery cover assembly (100) is for use in a portable electronic device. The battery cover includes a housing (10) and a battery cover (20). The housing has a first engaging portion (13) at one end thereof, and a holding portion (11) at an opposite end. The holding portion has an latch plate (1111). The battery cover has a second engaging portion (214) formed at one end thereof for engaging with the first engaging portion and defines a latch opening therein for engaging with the latch plate. The latch plate is integrated with the housing for being elastically deformed by an outside force so as to releasably lock with battery cover.
US07702369B1	Method of increasing battery life in a wireless device Disclosed is a circuit, comprising a device having a minimum operating voltage, a voltage supply, wherein the voltage supply may have a value above or below or equal to the minimum operating voltage of the device, a voltage boost converter circuit having a boosted voltage output, a switch coupled between the voltage supply, the boosted voltage output and the device, wherein the switch is capable of passing one of the voltage supply or the boosted voltage output to the device, and a processing element capable of controlling the switch. A system comprising the circuit and a method of using the circuit are further described.
US07702361B2	System and method for providing communication and positioning information A communication module capable of simultaneously providing communication and positioning information is provided. The communication module includes a processor with an integrated positioning receiver. The processor transmits and receives communication information, such as interconnect voice, dispatch voice, or data, using a first transceiver. The integrated positioning receiver is coupled to a second transceiver to transmit positioning information.
US07702359B2	Direct-conversion transmitter circuit and transceiver system Disclosed is a direct conversion type transmitter or transceiver circuit suitable for a mobile communication device which corresponds to broad signal output level variable width to be required by W-CDMA, which does not necessitate any high-performance low noise VCO and RF filter, capable of reducing a number of components and the cost. In the input portion of an orthogonal modulator composed of a divider, mixers, and a common load, there are provided variable attenuators. If an input signal level of the orthogonal modulator within the transmitter circuit lowers, this variable attenuator circuit is operated so as to lower the bias of the orthogonal modulator to reduce the amount of occurrence of carrier leak, and to prevent the signal during low output level and carrier leak ratio from being deteriorated. The direct conversion transmitter circuit is capable of easily realizing output level variable width of 70 dB or higher and reducing a variable amount in the high frequency circuit in which it is difficult to secure the variable gain width.
US07702358B2	System and method for communications of cargo containers in a container security system using wireless ad-hoc networking techniques A system and method for communications between a plurality of shipping containers using a short range or local area wireless communication device is provided. The system also contains a cellular communications device, a satellite communications device, or both, which are used to transmit information to, and receive commands from remote central monitoring station. The system includes a method which creates dynamic links between the containers using the short range channel. Containers are organized in networks and sub networks, and have built in redundancy features.
US07702354B2	Transmission power control method and mobile terminal apparatus A base station creates and transmits power control data to a mobile terminal at each prescribed time slot based on signals received from the mobile terminal, and the mobile terminal controls the transmission power of signals to the base station based on the power control data. During this transmission power control, the mobile terminal measures the reception level of common pilot signals transmitted from the base station at each time slot, calculates a moving average of the reception level for a plurality of time slots, and when transmission to the base station is interrupted, stores the transmission power and moving average for the immediately preceding time slot, and when transmission to the base station is resumed, adds the difference between the moving average at the time of transmission resumption and the stored moving average to the stored transmission power, and uses the power obtained by this addition as the signal transmission power at the time of transmission resumption.
US07702352B2	Network node power management methods and apparatus Network node power management methods and apparatus are generally described herein. Other embodiments may be described and claimed.
US07702351B2	System and method for global power control A system and method are provided for global transmission power control in a wireless communication device. The method comprises: measuring the received power of a receiving device; collecting the received power measurements, and accepting a received power threshold; and, generating the optimal transmit power level for a transmitting device, in response to the collected received power measurements and received power threshold. The received power measurements of base station can be collected and the method generates the optimal transmit power level for a mobile station in response to the collected base station received power measurements. Alternately, the received power for mobile stations in a network downlink can be measured and collected, and the optimal transmit power level for a base station can be calculated in response to the collected mobile station received power measurements.
US07702348B2	Method of digital trunked communication system fast call setup The present invention discloses a method of fast call setup in digital trunking communication system, including: the terminal user initiating a PTT call; the base station receiving said PTT call request, assigning channel resource for the call, establishing forward service channel according to the distribution of channel, transmitting an empty frame on the forward service channel and at the same time transmitting an extended channel assignment message to specify the service channel assigned for the terminal; after receiving the extended channel assignment message, the terminal user opening the receiver to track and acquire the forward service channel, and at the same time transmitting one or more prefix-frame on the reverse service channel or reverse pilot channel; the base station or the terminal performing the operation of acquisition of service channel, if the acquisition succeeds, the call setup is successful, if the acquisition fails, the call setup is failed and enters release flow. The method of the present invention adopts a mode of overlapping of signaling handshake and channel acquisition, so as to advance the signaling handshake, reduce call accessing time, and realize fast call setup.
US07702345B2	Voice data RF disk drive IC An integrated circuit (IC) includes a baseband processing module, a disk driver interface, an RF section, and an interface module. The disk drive interface is coupled to the baseband processing module and to an off-IC disk drive, wherein the disk driver interface facilitates transfers between the baseband processing module and the off-IC disk drive.
US07702337B2	Method and system for providing quick service access Provided are apparatuses and methods for transmitting and receiving quick access services. For example, a mobile terminal may receive a data stream containing a quick access service of a particular type. The quick access service may have a fixed Packet Identification (PID) and/or fixed IP address. The fixed PID and/or fixed IP addressed may be associated with a quick access service based on the particular type of the quick access service. In another example, a mobile terminal and a user interface on a mobile terminal may provide a menu for selection of an access mode for accessing the quick access service. Also, a quick access service may be selected based on the type of the quick access service.
US07702328B2	System for handoff of aircraft-based content delivery to enable passengers to receive the remainder of a selected content from a terrestrial location The Content Delivery Handoff System enables a passenger's wireless device, operating in an airborne wireless cellular network, to receive selected content and to ensure continuity and/or completion of the content delivery when the aircraft reaches its destination before the entirety of the selected content is delivered to the passenger. This completion of content delivery can occur in a spatially and temporally disjunct manner where the delivery of the remainder of the selected content occurs at a terrestrial location or on a subsequent flight and at a later time.
US07702327B2	Wireless control for creation of, and command response to, standard freight shipment messages In a freight management system a translator in a monitor system receives and transmits data in standard freight message format from and to a number of users, as well as in a variety of wireless formats to and from freight assets, and automatically in real time translates between the formats. The translator receives sensed data from the freight assets and transmits the translated data to the respective users while transmitting commands in wireless format to the freight assets on the basis of data received in standard freight message format.
US07702325B2	Terminal system and radio resource control in wireless telecommunications system A subscriber terminal holding a subscriber identity is connected to a sub-terminal using the identity of the subscriber terminal over a wireless proximity interface. A radio link directed from an infrastructure to the sub-terminal is requested by the subscriber terminal, and at least a portion of signalling between the sub-terminal and the wireless telecommunications infrastructure is routed via the subscriber terminal.
US07702313B1	Telecommunications terminal Telecommunications terminal having a memory device to store user-specific data, having a transmission device whose input is connected to a memory device, where the memory device and the transmission device are designed to store at least one string of digits and to transmit it while a connection exists, and an authentication device to protect the user-specific data against unauthorized access are provided.
US07702311B2	Method for extending content aware accounting to a serving GPRS node A serving GPRS node (SGSN) is made content aware by passing content based rate information in the GPRS tunnel protocol (GTP) header. The SGSN uses the PDP context request to inform a GPRS support node (GGSN) that it is content aware and can process the content based rate information. In one embodiment, the rate information is passed in a GTP extension header. A new GTP header type tells the SGSN that rate information is present in the GTP header content field. In an alternate embodiment, the rate information is passed in a fourth octet of a four octet tunnel endpoint identifier (TEID).
US07702306B2	Apparatus and method for local oscillator calibration in mixer circuits An apparatus and method for local oscillator calibration compensates for filter passband variation in a mixer circuit, such as a receiver circuit. The receiver includes at least a mixer circuit and a filter coupled to the output of the mixer. During operation, the mixer mixes an RF input signal with a first local oscillator (LO) signal to frequency translate a selected channel in the RF input signal into the passband of the filter. During a calibration mode, the RF input signal is disabled, and the first LO signal is injected into the filter input by leaking the first LO signal through the mixer circuit. The frequency of the LO signal is then swept over a frequency bandwidth that is sufficiently wide so that the actual passband is detected by measuring the signal amplitude at the output of the bandpass filter, thereby determining any variation in the passband of the filter from the expected passband. Once the actual passband is determined, then the frequency of the first local oscillator signal is adjusted or tuned to compensate for any frequency shift of the actual passband compared to the expected passband. Therefore, the selected channel is up-converted into the center of the actual passband of the bandpass filter and will not fall outside the passband. This enables the passband of the bandpass filter to be narrowed, as compared with conventional receivers that do not utilize this calibration procedure. For example, the bandpass filter can be narrowed to one or two channels wide.
US07702305B2	Use of a preselection filter bank and switched local oscillator counter in an instrumentation receiver An instrumentation receiver architecture for processing an RF signal has a dual-IF channel architecture, a low-band IF channel and a high-band IF channel, and a tunable oscillator, such as a yttrium-iron-garnet (YIG) tunable oscillator (YTO), a voltage controlled oscillator (VCO), a bank of VCOs and the like, providing a different mixing frequency range to each channel, generally a higher frequency range to the high-band IF channel than to the low-band IF channel. At the input to the high-band IF channel is a bank of preselection filters for selecting a frequency band from the RF signal for processing by the high-band IF channel. A switch selects the output from one of the low-band and high-band IF channels for further processing.
US07702299B2	Modulation circuit device, modulation method and radio communication device The amplitude modulator comprises: an angle modulator for angle-modulating a phase signal to be inputted; a waveform shaping means in which, (1) when the magnitude of an amplitude signal to be inputted becomes smaller than a first prescribed value, a waveform of the amplitude signal is shaped so that the magnitude of the amplitude signal of the portion which becomes small becomes the first prescribed value; and/or (2) the waveform shaping means in which, when the magnitude of the amplitude signal to be inputted becomes larger than the second prescribed value which is larger than the first prescribed value, the waveform of the amplitude signal is shaped so that the magnitude of the amplitude signal of the portion which becomes larger becomes the second prescribed value; and an amplitude modulator for amplitude modulating the signal of the output of the angle modulator by the signal of the output of the waveform shaping means.
US07702297B2	Mobile communication device capable of leaning A mobile phone includes a main body consisting of front and rear side parts; a retention groove formed in the rear side part and having pivotal holes; and a prop kept within the retention groove in the rear side part. The prop has two positioning posts pivotally inserted into the pivotal holes in the rear side part. The prop is turnable relative to the rear side part between a normal position where the prop is pressed into the retention groove, and an extended position where the prop is spaced apart from the rear side part to form an angle. Movement of the prop between the normal position and the extended position results in engagement between the positioning posts and the pivotal holes so as to permit leaning of the main body on the prop.
US07702295B1	Frequency agile duplex filter Systems and methods are disclosed for an electronically adjustable signal filter system, which comprises, in some embodiments, a first filter coupled to an antenna coupling network and a second filter, a power amplifier coupled to the first filter, an antenna connected to an antenna coupling network, a pilot tone generator coupled to the first filter, and a first signal source connected to the power amplifier and first filter. In some embodiments, the power amplifier amplifies the first signal, the first filter places a notch into the first signal transmitted to the antenna coupling network, the antenna coupling network combines the first signal and a second signal received from the antenna and transmits a third signal to the second filter.
US07702291B2	Radar detection from pulse record with interference A single chip radio transceiver includes circuitry that enables detection of radar signals to enable the radio transceiver to halt communications in overlapping communication bands to avoid interference with the radar transmitting the radar pulses. A method in a radio transceiver includes grouping a plurality of pulse data entries, generating a first list of pulse repetition intervals having pulses with a pulse width within a specified range, counting a number of most and second most common pulse interval values and determining whether a radar signal is present. Generally, the method includes determining a radar is present in one of three different ways, namely, determining whether the number of the most common pulse interval values exceeds a specified value, determining a radar signal is present with an extra pulse and finally, determining a radar is present with a missing pulse.
US07702290B1	Dynamic energy control A method for uplink transmission includes determining a channel loss that occurs along a communication channel between an access point and a tag. An uplink spreading factor is determined based at least in part on the loss factor and at least in part on a predetermined power at which the access point is to receive an uplink signal from the tag. The uplink signal is spread with the uplink spreading factor. The uplink signal is transmitted from the tag to the access point.
US07702278B2	Broadcast receiver with smart antenna beam scanning A broadcast receiver includes a smart antenna, a tuner which extracts a signal of predetermined channel from among airwaves received by the smart antenna, a signal processing unit which processes the signal extracted by the tuner, and a control unit, in a case the airwave has become unreceivable, to set a pointing direction of the antenna on that occasion as a reference direction, to shift the pointing direction a predetermined magnitude counterclockwise or clockwise, and to decide propriety of reception of the airwave. The control unit iterates counterclockwise and clockwise shifts alternately in a region near the reference direction, while the shift magnitude of the pointing direction is being increased in succession and so that the direction as to which the propriety of reception has been decided once may not be included in the directions of the shifts, until the reception of the airwave becomes possible.
US07702274B2	Image forming apparatus with fixing fluid applying section Provided is an image forming apparatus jointly using both a heat fixing method and a wet fixing method wherein bleeding and aggregation of a toner, curl and creases of a recording medium, and the like do not occur when a fixing fluid is applied to a toner image. Power consumption is significantly lower than that of a past heat fixing method. A high-quality image is stably formed. The image forming apparatus includes a toner image forming section, an intermediate transfer section, a secondary transfer section, a fixing fluid applying section, a fixing section having a driving roller in which a heating section is built, and a conveying section. There is provided a fixing fluid amount controlling section which controls a fixing fluid amount applied to a toner image on a recording medium by the fixing fluid applying section so as to increase as the recording medium approaches the fixing section.
US07702273B2	Fixing device A fixing device 6 according to the present invention has an endless-shaped heating belt 8, a first and a second roller 9 and 10 for stretching the heating belt 8, and a pressure roller 11 for nipping paper 2, together with the heating belt 8. The first roller 9 is supported so as to be rotatable by bearings 13 arranged at both ends of the first roller 9. The second roller 10 is supported so as to be rotatable by bearings 14 arranged at both ends of the second roller 10. The bearing 13 for supporting the first roller 9 is arranged more inward in an axial direction Z1 of the rollers than the bearing 14 for supporting the second roller 10.
US07702270B2	Fixing device Relates to a fixing device comprising a fixing part for fixing toner to a paper, and a separation mechanism to separate paper P from fixing body, separation mechanism has a separation member 12 with a shaft member 17 and a separation pawl 16, and a first urging mechanism 19 for urging separation pawl 16 to approach fixing body 2. To improve the device to suitably separate even a firmly adhered paper without damaging fixing body, a second urging mechanism 28 is provided for urging shaft member 17 toward initial position. Resultant force of pressing forces by two urging member 19, 28 is set such that shaft member 17 will be moved to the retracted position by a jammed paper P, and in a normal state, shaft member 17 will be prevented from moving to the retracted position even if paper P has a high adhesive force.
US07702267B2	Apparatus and method for transfer of image forming substances The present invention relates to a device or method which may reduce starvation in the transfer of an image forming substance to a developing location within an image forming apparatus. The device may include a first roller having a surface which is capable of supplying an image forming substance to a developing location. A second roller may then be included having a surface in rotating contact with the first roller. The second roller is capable of supplying image forming substance to the first roller. The second roller may comprise foam having a specified porosity, electrical conductivity, and/or be configured to rotate in a desired direction and/or desired speed relative to the first roller.
US07702263B2	Toner cartridge including feed opening and return opening and image forming device In accordance with one or more aspects, a toner cartridge may be detachably attached to an image forming device. The toner cartridge may be provided with a cartridge case. This cartridge case may be provided with a toner chamber, a cartridge side feed opening for feeding a toner from the toner chamber to the outside of the cartridge case, and a cartridge side return opening from the outside of the cartridge case to the toner chamber. The cartridge side feed opening and the cartridge side return opening may be offset along a horizontal direction. A bottom surface of the toner chamber may slant downward from the cartridge side return opening to the cartridge side feed opening.
US07702260B2	Development cartridge, development device, and image formation apparatus There is provided a development cartridge capable of switching development colors in a plurality of development cartridges without using development rack. A development cartridge of the present invention has a part of a drive member for switching development colors.
US07702255B2	Opening/closing mechanism, image forming apparatus and gear mechanism A gear mechanism comprises a first gear which has a portion with no teeth and rotates, a second gear which engages the first gear and a cam mechanism which includes a cam portion provided on one gear of the first gear and the second gear and a cam contact portion provided on the other gear of the first gear and the second gear and making contact with the cam portion. When the second gear moves from a position in which the second gear engages the tooth portion of the first gear to a position in which the second gear opposes the portion with no teeth of the first gear, the cam mechanism acts to bring the axes of the first gear and the second gear away from each other.
US07702254B2	Image forming apparatus having mechanism for reducing pressing force between image bearing member and transferring member An image forming apparatus includes a photosensitive member and a transfer roller that are brought into pressure contact with each other by a force of a transfer spring to define a nip section therebetween. The transfer roller is movable between a first position at which the transfer roller is in pressure contact with the photosensitive member and a second position at which the pressure is eliminated or reduced. When the transfer roller is pushed to the second position, the transfer roller is latched at the second position and the apparatus can be carried in this state. When the apparatus is activated and the photosensitive member is driven, the transfer roller is unlatched and is returned to the first position by the force of the transfer spring, so that the nip section is formed again between the transfer roller and the image bearing member and an image forming process is enabled.
US07702252B2	Connector and image forming apparatus including the same A connector connects a rotatable body including an attachment hole and an engaging groove, and a shaft pressed into the attachment hole to integrally rotate. The connector includes at least one pin configured to fit in the engaging groove; and a screw having a head configured to be pressed against the rotatable body either directly or via another member. The at least one pin is fixed on the shaft and extends in a radial direction of the shaft to penetrate the shaft. The screw is screwed into a screw hole on an end face of the shaft and is tightened to press the at least one pin against a surface of the engaging groove.
US07702247B1	Latent image developer system and method A latent image developer system and method is disclosed permitting the recovery of document impressions present in paper and other materials. The disclosed system utilizes two power supplies, a first power supply providing a plate bias charge which is applied to the document to be inspected, and a secondary power supply utilized to attract toner or other imaging powder attractant to the latent images present on the document to be inspected. The disclosed invention permits recovery of previously unrecoverable latent detail within documents as compared to the prior art which utilized a single power supply to promote toner to be attracted to the latent document images.
US07702231B2	Autofocus control apparatus and method of controlling the same When an imaging mode is set, a subject is imaged, and image data representing a subject image is obtained. Continuous AF is operated such that the subject image represented by the obtained image data is focused. Ranges ahead of and behind the focusing position of an imaging lens obtained in the continuous AF are determined as a focusing range. A formal search is conducted in the determined focusing range. A focusing position is determined from a graph of focusing integrated values obtained in the formal search. The imaging lens is put at the determined focusing position.
US07702224B2	Snap ring fit spa heater element A spa heater includes a heater element having a single outer wall with indentations near each end for receiving clips for positioning the heater element. The indentations are preferably stamped or formed by some other method which does not weaken the outer wall and the heater element is retained by use of the clips in the indentations. Incorporation of the indentations and the clips allows use of a single thin outer wall thereby reducing cost. The heater element is held and sealed by a combination of O-rings, stepped washers, snap rings clips, and caps. An electrical connection may be made using ring type wire ends residing under the caps or by connecting to posts extending from the ends of the heater element. The heater element is preferably a spiral heater element and a titanium outer wall may be used to resist corrosion and increases heater element life.
US07702221B2	Unified control and memory for a combined DVD/HDD system A combined digital versatile disc (DVD)/hard disk drive (HDD) system controls a HDD assembly and a DVD assembly comprises a DVD/HDD control module controls operation of the HDD assembly and the DVD assembly. Volatile memory communicates with the DVD/HDD control module and stores volatile data relating to the operation of the DVD assembly and the HDD assembly. Nonvolatile memory communicates with the DVD/HDD control module and stores nonvolatile data relating to the operation of the DVD assembly and the HDD assembly.
US07702219B2	Audio and/or video generation apparatus and method of generating audio and/or video signals An audio and/or video generation apparatus comprises a recording processor which is operable to record audio and/or video signals on a recording medium, a meta data generation processor which is operable to generate meta data identifying the content of the audio/video signals, and a communications processor which arranged to communicate the meta data separately from the recording medium.Furthermore, the meta data generation processor may be operable to generate at least one sample image which is representative of a video image from the recorded video signals, and to associate the sample image with an address on the recording medium at which the video image is recorded. The video and/or audio generation apparatus provides an advantage in generating and utilising meta data to facilitate the generation of audio/video productions. Accordingly, a system for generating an audio and/or video production comprises an acquisition processor operable in use to receive instructions from a user which instructions are representative of a list of content items for the audio and/or video production. The audio and/or video generation apparatus is arranged in use to receive information representative of the list of content items, and to generate audio and/or video signals in accordance with the content items on the list. An ingestion processor may be provided to receive the list of content items, and the audio and/or video signals and to form the audio and/or video production by associating the audio and/or video signals with the list of content items.
US07702216B2	Information recording method, information recording medium, and information reproducing method, wherein information is stored on a data recording portion and a management information recording portion With this invention, at least one of a video file containing video information, a still picture file containing still picture information, and an audio file containing audio information and a management file having management information on a control method of reproducing the information in the file are recorded on an information storage medium. This realizes a data structure that causes the recording and deleting places on the information storage medium to correspond spuriously to places on a single tape, such as a VTR tape. Use of the data structure provides users with an easy-to-use interface.
US07702215B2	Scrambled video streams in an audiovisual product Access to an audiovisual product is controlled, through the use of scrambled video streams. Cells 420 of audiovisual data A,B,C1,D are scrambled into at least first and second video streams 1901, 1902. A video stream switch instruction 2011, 2021 automatically switches between at least first and second video streams 1901, 1902 during reproduction, so that cells are reproduced from an appropriate video stream 1901, 1902 at appropriate times. Multi-angle video objects 2020 hold the cells 420 in a selected video stream 1902, and hold nil or erroneous data C2 in other streams 1901.
US07702208B2	High density optical fiber distribution enclosure An optical fiber distribution enclosure includes a housing defining an interior, a first fiber distribution area disposed within an upper portion of the interior, a second fiber distribution area disposed within a lower portion of the interior and a signal splitting area disposed between the fiber distribution areas. A splitter module secured within the signal splitting area has a connectorized splitter input optical fiber and connectorized splitter output optical fibers. A fiber parking area is movably disposed within the lower portion adjacent the second fiber distribution area for temporarily storing splitter output optical fibers that are not routed to the fiber distribution areas. An input fiber distribution area disposed within the interior interconnects an optical fiber of a feeder cable with the splitter input optical fiber. The splitter output optical fibers are eventually routed to a fiber distribution area and interconnected with a corresponding optical fiber of a distribution cable.
US07702204B2	Method for manufacturing an optical fiber preform A method for manufacturing a final optical fiber preform via overcladding of a primary preform having a cross section area is disclosed. The method includes at least one manufacturing step of the primary preform by deposit of an inner cladding and of a central core inside a tube of fluorine-doped silica, the tube being chosen such that it has a cross section area that is maximally about 15% less than the cross section area of the primary preform. With the method of the invention it is possible to manufacture a preform of large capacity at reduced cost which allows the drawing of an optical fiber having reduced transmission losses.
US07702203B1	Armored fiber optic assemblies and methods of making the same Armored fiber optic assemblies are disclosed that include a dielectric armor along with methods for manufacturing the same. The dielectric armor has an armor profile, thereby resembling conventional metal armored cable to the craft. The dielectric armor provides additional crush and impact resistance and the like for the optical fibers and/or fiber optic assembly therein. The dielectric armor is advantageous to the craft since it provides the desired mechanical performance without requiring the time and expense of grounding like conventional metal armored cables. Additionally, the armored fiber optic assemblies can have any suitable flame and/or smoke rating for meeting the requirements of the intended space.
US07702199B2	Light pipe for making an electronic display arrangement The invention relates to a light pipe for use in particular in an electronic display arrangement, and designed to transmit light signals from one of its ends referred to as an entry surface to its other end referred to as an exit surface going towards the eye of a user for viewing a virtual image, the pipe including a diffractive component on one surface, referred to as its improved surface, said diffractive component being an element satisfying the equation of an aspherical body of revolution. According to the invention, said diffractive component is formed directly on said entry surface.
US07702198B2	Semiconductor laser module and light scanning device and image forming apparatus using the same An angle β between a principal ray of incident light incident on an optical fiber via a lens system and a marginal ray of reflected light nearest to the principal ray of the incident light when the reflected light is the incident light reflected on an entrance end surface of the optical fiber is larger than an angle θ between the principal ray and a marginal ray of the incident light. A receiving surface is provided separately from an inner surface of a light-passing hole so that the reflected light is received by the receiving surface. Therefore, the reflected light from the entrance end surface of the optical fiber is prevented from returning to a semiconductor laser light source to thereby attain improvement in stability and high reliability of laser light output of the semiconductor laser light source.
US07702189B2	Fiber optic chemical sensor Optical systems for sensing chemicals. An example system includes a light source, a light sensor, a processing device in signal communication with the light source and the light sensor, and a fiber optic cable that receives light from the light source and delivers light to the light sensor. The fiber optic cable includes a cladding material that is permeable to a predefined substance and an optical fiber core surrounded by the cladding material. The optical fiber core is a single mode optical fiber having a diameter greater than 30 μm. The optical fiber core includes a hollow center having a diameter between 1-50 μm. The optical fiber core includes a plurality of lengthwise holes positioned to provide single mode light propagation properties. The plurality of lengthwise holes have a diameter between 0.2-4 μm.
US07702185B2	Use of image similarity in annotating groups of visual images in a collection of visual images Process-response statistical modeling of visual images can be used in determining similarity between visual images. Evaluation of the content of visual images—and, in particular, image similarity determinations—can be used in effecting a variety of interactions (e.g., searching, indexing, grouping, summarizing, annotating, keyframing) with a collection of visual images.
US07702168B2	Motion estimation or P-type images using direct mode prediction The process for coding the current block comprises a step of selecting the predicted block from among candidate blocks, the selection being dependent on a difference DBdrx,dry between the co-located block of the current image block lying in an image of type B and the block of a reference image, the latter block being designated by the motion vector with components drx, dry which is allocated to co-located block and which is colinear with the motion vector Vp allocated to the current block and designating the candidate block. The process relates to data compression, the transmission of digital images using the video coding standard comprising a direct prediction mode, for example the h263, MPEG4 or h261 standard.
US07702167B2	Recording medium having recorded thereon coded information using plus and/or minus rounding of images A recording medium having recorded thereon information related to coded data of an image sequence; wherein the information related to coded data of an image sequence is a set of coded frame information of a plurality of frames of an image sequence; wherein the coded frame information includes: information related to a difference image between an image of a current frame and a prediction image of the current frame, the prediction image being synthesized by performing motion compensation, information related to motion vectors estimated in performing the motion compensation, and rounding method information specifying either a positive rounding method or a negative rounding method for interpolating intensity values of pixels in performing the motion compensation when the input image is coded as a P frame, wherein no rounding method information is included in the coded frame information when the input image is coded as an I frame.
US07702165B2	Device, method, and program for image coding There is provided with an image coding method including: splitting an image into a plurality of block images each having plural pixels; performing a Discrete Cosine Transform (DCT) processing on the block image to calculate DCT coefficients from the block image; determining whether the block image is in a flat state or non-flat state depending on the DCT coefficients calculated from the block image; specifying as quantization step sizes for first DCT coefficients which are DCT coefficients equivalent to one-dimensional DCT coefficient out of the calculated DCT coefficients, adjusting step sizes equal to or smaller than values of the first DCT coefficients and as quantization step sizes for second DCT coefficients other than the first DCT coefficients out of the calculated DCT coefficients, standard step sizes given beforehand, when the block image is in the flat state; and quantizing the calculated DCT coefficients with respective quantization step sizes specified.
US07702163B2	Image signal processing apparatus, camera system and image signal processing method An image signal processing apparatus, the method and a camera system are provided, by which highly efficient processing close to 1-path processing can be performed without deteriorating a picture quality or taking too much time for the processing, a capacity required for a compression rate, band and memory in the worst case can be assured and a random accessing property is not impaired when compressing image data: wherein a data signal processing unit performs a compression processing by dividing input image data to a plurality of bit resolution parts and applying a predetermined compression method to each divided part.
US07702159B2	System and method for detecting similar differences in images A system and method for detecting differences in images and identifying groups of images with similar differences detected is provided. To this end, an image comparator may be operably coupled to a pixel comparator for comparing pixels of the baseline image with corresponding pixels of one or more sample images to detect differences between the pixels compared. A derivative difference processor may be also provided which may be operably coupled to the pixel comparator for determining a difference region of pixels detected as different by the pixel comparator in the sample images. An image sorter may also be provided which may be operably coupled to the difference derivative processor for grouping together sample images that have a similar difference region determined by the derivative difference processor.
US07702155B2	Energy minimization for classification, pattern recognition, sensor fusion, data compression, network reconstruction and signal processing A data analyzer/classifier comprises using a preprocessing step, and energy minimization step, and a postprocessing step to analyze/classify data.
US07702153B2	Systems and methods for segmenting object of interest from medical image A system for segmenting a target organ tumor from an image includes a background model builder, a foreground model builder and a tumor region locator. The background model builder uses an intensity distribution estimate of voxels in an organ region in an image to build a background model. The foreground model builder uses an intensity distribution estimate of voxels in a target organ tumor to build a first foreground model. The tumor region locator uses the background model and the first foreground model to segment the target organ tumor to obtain a first segmentation result.
US07702150B2	Method for determining a p-quantile for the pixel levels, in particular the grayscale levels, of a digital image Frequency distributions are particularly difficult to analyze by means of image processing systems if the digital images to be processed are divided into disjoint image areas and signal processors associated with each image area perform pre-processing of the pixel data. To determine a total frequency distribution, a large number of corresponding table entries must be transferred to a central processor. The invention accordingly proposes that the individual signal processors perform summation of the individual entries in a frequency distribution to obtain a cumulative frequency table. To find a p-quantile, not all the entries of the cumulative frequency tables need to be transferred to the central processor. If the latter in particular performs interval nesting, a value from the cumulative frequency tables only needs to be interrogated a manageable number of times in order to obtain a single entry in the total image cumulative frequency table.
US07702136B2	Perfecting the effect of flash within an image acquisition devices using face detection Within a digital acquisition device with a built in flash unit, the exposure of an acquired digital image is perfected using face detection in the acquired image is provided. Groups of pixels that correspond to plural images of faces are identified within a digitally acquired image, and corresponding image attributes to the group of pixels are determined. An analysis is performed of the corresponding attributes of the groups of pixels. It is then determined to activate the built-in flash unit based on the analysis. An intensity of the built-in flash unit is determined based on the analysis. Alternatively based on similar analysis, a digital simulation of the fill flash is performed on the image.
US07702114B2	High efficiency audio transducer A transducer (1) for producing sound in response to an electrical signal comprises an actuator (2) with a magnet (4) and a coil (5), and a vibration surface (3), for example a loudspeaker cone. The actuator and the vibration surface are mechanically coupled. The transducer (1) is designed to operate at substantially its resonance frequency (f0). This results in a very high transducer efficiency, which is particularly relevant for rendering low audio frequencies.
US07702113B1	Parametric adaptive room compensation device and method of use The present invention a parametric equalizer and a method for correcting for room mode problems. The inventive device is an analog based, parametric notch filtration system with at least two-channels. The inventive equalizer has sufficient bands, bandwidth, attenuation, and flexibility to accurately address room mode problems. The inventive system allows for continuous fine adjustment of attenuation and bandwidth. The method involves measuring, evaluating, and calculating what variables need to be used to correct the room mode issue for a particular room and then correcting the identified variables.
US07702112B2	Intelligibility measurement of audio announcement systems A measurement system and method combine an audio announcement system with a plurality of spaced apart sensors to evaluate intelligibility of audio output from loudspeakers of the audio announcement system. Processing can take place at some or all of the sensors as well as at a common control element. Evaluations can be based on use of an appropriate speech intelligibility index method.
US07702108B2	Use of communication equipment and method for authenticating an item, unit and system for authenticating items, and authenticating device The present invention relates to a method and a system for the local or remote authentication of an item, in particular a security document, with the help of a authenticating device, comprised in, connected to, or linked to mobile communication equipment. Said item carries a marking exhibiting a characteristic physical behavior in response to interrogating energy, such as electromagnetic radiation and/or electric or magnetic fields. Said marking may comprise physical and logical security elements, e.g. a barcode, or a characteristic particle or flake pattern, exhibiting a characteristic physical response.
US07702107B1	Server-based encrypted messaging method and apparatus A method and system for server-based encrypted messaging that uses a receiver-determined password to symmetrically encrypt messages that are intended for that receiver. A sender authenticates to a Recipient Password Server in order to generate a message and optionally to upload attachments, which are enclosed in a virtual envelope that is digitally signed. Each envelope is encrypted with the intended recipient's password and sent either as an email attachment or by other messaging protocol. Messages intended for multiple recipients are each custom encrypted with the individual recipient's password and mapped to the correct identity and reception point. Users can change their passwords at any time. A method is also included to support secure searches of a collection of encrypted envelopes for exact words and phrases.
US07702104B2	System and method for securing genomic information A system and method for securing an electronic transmission of a nucleotide chain. A security system is provided that comprises: a system for identifying coding and non-coding regions in the nucleotide chain; and a system for selectively encrypting only the coding regions identified in the nucleotide chain.
US07702103B2	Device for the transformation of MPEG 2-type multimedia and audiovisual contents into secured contents of the same type A process for distributing video sequences according to a nominal flux format including a succession of images, where each image includes a succession of blocks, and in which at least one of blocks in one of the images is calculated by motion prediction relative to at least one reference image, where the motion prediction is encoded in the flux with at least one motion vector, the flux being processed, before transmission to client equipment, with an analysis for generating a first modified flux having the format of a nominal flux and having images modified by substitution of selected data with selected data of the same nature, but random, and a second flux of any format including the substituted data and digital information likely to allow reconstruction of the modified flux, then transmitting separately, in real or deferred time, the two fluxes generated from a server toward the client equipment, and for which is calculated on the client equipment a synthesis of a nominal format flux as a function of the primary flux and of the second flux distinguished by the fact that the modification includes modifying at least one of the motion vectors.
US07702098B2	Elliptic curve point octupling for weighted projective coordinates Systems and methods for elliptic curve octupling for weighted projective coordinates are described. In one aspect, a weighted projective point P on an elliptic curve is identified. 8P is computed from P independent of repeated doubling operations using fewer field multiplications.
US07702095B2	Method and system for providing DC power on local telephone lines A system for providing DC power on local telephone lines, such as telephone lines in a building or office, for powering devices and circuitry associated with communications over those telephone lines, as well as other functions. Desired voltage and power levels are supplied over local telephone lines by separating the DC power component from the central office or private branch exchange with a DC blocking filter while passing all AC telephony signals. A distinct DC power is then imposed over the telephone line for powering both the telephony service as well as other loads. Conventional telephone off-hook detection is simulated for compatibility with the central office or private branch exchange. The functions required may be integrated, partially or fully within a telephone outlet.
US07702094B2	Method of storing information within an ACD A method and apparatus are provided for storing data from an automatic contact distributor for access through the Internet. The method includes the steps of transferring information from a first resource of the automatic contact distributor to a database through the Internet where the transferred information is encoded within SIP messages and where the transferred information related to a predetermined service that the first resource has performed for a second resource of the automatic contact distributor, compiling and storing the transferred information in a data file of the database where the data file is indexed by a file identifier and retrieving the information from the database by a third resource of the automatic contract distributor using the file identifier.
US07702092B2	Communication system and method of routing calls to a terminating end point A method of determining a telephony network node for routing a call is disclosed. The method includes receiving a call request at a service provider node, the call request including a called number to reach a called party. The method further includes sending a combined telephone number mapping (ENUM) and local number portability (LNP) query from the service provider node to a remote ENUM database, the combined ENUM/LNP query including the called number. The method further includes receiving a response to the combined ENUM/LNP query at the service provider node. The response includes one of an internet protocol address that identifies a node of an internet protocol network, a local routing number (LRN) to be used to route the call to a uniquely identified switching node of a circuit-switched network, or a return of the called number to indicate that the called number can be used to route the call to the called party.
US07702085B2	Dynamic FD coexistence method for PLC systems A power line communication method is provided for realizing data communication between at least one first or sending power line communication partner device (P1) and at least one second or receiving power line communication partner device (P10). The inventive method comprises a step of checking transmission conditions of a plurality of possible communication channels (Ch1, . . . , Chn). Thereby generating transmission condition data which are descriptive for the communication conditions of the respective possible communication channels (Ch1, . . . , Chn). Additionally, a step of selecting communication conditions of the plurality of possible communication channels (Ch1, . . . , Chn) as actual communication conditions based on said transmission condition data.
US07702071B2	Method for performing power diffraction analysis A method for successively performing a powder diffraction analysis of at least two powder samples being contained in sample holding means. Use is made of an apparatus comprising:—a source of radiation being adapted to direct a radiation beam to a power sample,—a detector for detecting diffraction radiation of a powder sample,—a drive means associated with said sample holding means for effecting a movement of an irradiated powder sample during irradiation and detection. The method comprises the steps of irradiating a powder sample and detecting the diffraction radiation of the powder sample, arranging a further powder sample such that said radiation beam is directed to said further powder sample, and irradiating said further powder sample and detecting the diffraction radiation of said further sample. During irradiation and detecting of each sample the drive means effect a movement of the irradiated sample with respect to the radiation beam for the purpose of improving particle statistics. The sample holding means comprise a common multiple samples holder holding said at least two powder samples. Said drive means effect, during irradiation and detection of a sample contained in said common multiple samples holder, a movement of said common multiple samples holder with respect to the radiation beam.
US07702064B2	Method for providing 3D x-ray image data record and an x-ray imaging system with a measuring facility for detecting the breathing phase of a patient The invention relates to a method for providing a 3D x-ray image data record of a patient, in particular of the heart, by an x-ray imaging system connected to a measuring facility which monitors the breathing phases of the patient. The x-ray image system is automatically activated repeatedly when a predetermined breathing phase is reached and an image acquisition operation is carried out, during which a plurality of 2D x-ray images are recorded. An individual 3D image data record is reconstructed from the 2D x-ray images of each image acquisition operation and the different 3D image data records are registered in pairs in order to assign them in a correct positional and dimensional arrangement. Registration parameters are obtained during the registration. The 3D image data record is reconstructed from 2D x-ray images from all image acquisition operations using the registration parameters.
US07702063B2	CT method for the examination of cyclically moving object The invention relates to a computer tomography method for the detection of a cyclically moved object in an examination zone. First, after the acquisition of the measured values, a rough image of the examination zone is reconstructed from which a region relevant for the further method is selected. For the generation of an image with reduced motion artifacts or improved temporal resolution, reconstruction windows in predefinable position are used, which are optimized in such a way that they are, on the one hand, smallest possible, on the other hand, however, sufficiently large, to be able to reconstruct all voxels of this region. Only measured values acquired within the reconstruction windows are taken into account for the reconstruction of a CT image of the region.
US07702058B2	Data recovery method and module A method and apparatus for recovering data by a digital audio interface begins by receiving a stream of biphase encoded data. The processing continues by determining whether a next transition of a frame of the plurality of frames occurs during a first, second, or third time window after a preceding transition of the frame. When the next transition occurs during the second predetermined time, the digital audio interface synchronizes to a data rate of the stream of biphase encoded data based on the next transition and the preceding transition. If, the next transition occurs during the first or third predetermined windows, the digital audio interface synchronizes to a data rate of the stream of biphase encoded data based on the preceding transition edge and a subsequent transition. When the transition occurs during the third time window, the biphase encoding is violated, which indicates that a preamble is being received.
US07702051B2	Reception system with phase alignment of antenna signals A reception system for frequency or phase-modulated high-frequency signals, for motor vehicles, having a multi-antenna system having at least two antennas, an individually adjustable phase rotation element, situated in the reception path of the corresponding antenna, in each instance, and a subsequent receiver circuit. There is an individually adjustable switching element for switching through or interrupting the signal flow, in the reception path of every antenna. The reception signals are guided by way of phase rotation elements and the adjustable switching elements which are passed to a linear combination circuit, and wherein the combined signal is passed to the receiver circuit. Furthermore, there can be a level indicator for indicating the level of the combined signal in the form of a level signal and a computer device to which this level signal and the phase alignment of the reception signals can be achieved.
US07702048B2	Iterative interference cancellation using mixed feedback weights and stabilizing step sizes A receiver is configured for canceling intra-cell and inter-cell interference in coded, multiple-access, spread-spectrum transmissions that propagate through frequency-selective communication channels. The receiver employs iterative symbol-estimate weighting, subtractive cancellation with a stabilizing step-size, and mixed-decision symbol estimates. Receiver embodiments may be implemented explicitly in software or programmed hardware, or implicitly in standard Rake-based hardware either within the Rake (i.e., at the finger level) or outside the Rake (i.e., at the user or subchannel symbol level).
US07702046B2	Method and system for automatic gain control during signal acquisition The disclosure is directed to a mobile communication device that includes automatic gain control (AGC) circuitry and operates in either a tracking mode or an acquisition mode. A received signal is sampled n times to calculate an energy estimate that is used to set the gain control values within the AGC circuitry. The value of n varies depending on whether the handset is operating in the acquisition mode or the tracking mode. Acquisition mode is typically considered to be the mode prior to coarse timing acquisition, also referred to as frame acquisition.
US07702044B2	Radar detection and dynamic frequency selection A wireless network device includes a correlation module, an automatic gain control module, and a control module. The correlation module correlates a predetermined portion of a radio frequency (RF) signal and generates a correlation signal based thereon. The automatic gain control (AGC) module generates a gain control signal based on said RF signal. The control module selectively determines whether said RF signal is a radar signal based on said correlation signal and said gain control signal.
US07702041B1	Symbol timing method and digital receiver apparatus The present invention provides for receiving a radio frequency signal which encodes transmitted data, and for outputting data corresponding to the transmitted data. The radio frequency signal is received and converted to inphase and quadrature data. Phase information is extracted from the inphase and quadrature data. A symbol timing for the radio signal is determined based on the extracted phase information. The transmitted data encoded within the radio frequency signal is detected and processed based on the determined symbol timing. Data is output based on the detected and processed transmitted data. Since symbol timing is determined based on phase information, in the phase domain, a radio frequency receiver can be constructed with a lower complexity and a simpler structure.
US07702035B2	Searching method and apparatus for processing digital communication signals A method of searching digital communication signals in a system includes combining a plurality of channel measurements, providing output of the combining of channel measurements as an added input to the plurality of channel measurements, and acquiring a signal symbol based on results from the combining of channel measurements without addressing all timing hypothesis individually via a correlation operation.
US07702034B1	Parallel processing for programmable wideband digital modulation A circuit 30 for upsampling and upconverting a high rate signal that is divided into M in-phase (I) symbols and M quadrature (Q) symbols. A Nyquist filter 32 upsamples by a factor of k each of the 2M symbols in parallel during one system clock period (CP). The filter 32 has a plurality of 2kM filter components 40, 42, that each provides a continuous output. A plurality of multipliers 50, 52 each upconverts a filter component output with a carrier wave signal 46, 48 that is output from a numerically controlled oscillator 44. A plurality of adders 54 each adds the output of two multipliers 50 to recombine corresponding I and Q samples to output kM samples during a CP. For continuous phase modulation, N parallel bits are input into the filter 32, upsampled in one CP, and accumulated and modulated 82 in parallel in one CP. For analog processing, M (I) and M (Q) symbols are input into an FIR filter 77a, 77b for upsampling, and decimated at a MUX/DAC block 78 for subsequent analog upconversion.
US07702033B2	Modulating apparatus, mobile communication system, modulating method, and communication method An encoder encodes sound data and the like to generate a binary signal. A mapper converts the binary signal into a four-level symbol and outputs the four-level symbol. A base band filter includes a root raised cosine filter and a sinc filter. The base band filter blocks a predetermined frequency component of a symbol to shape the symbol into a waveform signal and outputs the waveform signal shaped. An FM modulator transmits a signal subjected to FM modulation according to a magnitude of an amplitude of a waveform signal to a receiving unit. When a symbol of ±3 is outputted from the mapper, a frequency shift of a signal transmitted from the FM modulator has a predetermined value in a range of 0.822 [kHz] to 0.952 [kHz]. This makes it possible to provide a modulating apparatus, a mobile communication system, a modulating method, and a communication method that use a modulating method that can conform to the FCC rule to be enforced in 2005 without using a linear power amplifier.
US07702032B2	Transmitter and method of transmitting a signal A transmitter includes an output. A coupler receives at least a derivative of the output and provides a feedback signal. A demodulator receives the feedback signal and performs an additive mixing to demodulate the feedback signal.
US07702025B2	Transmission/reception apparatus and transmission/reception method In the case of transmitting a signal of at least three bits in one symbol, when receiving a retransmission request signal from a radio station of a communication partner, a transmission apparatus 10A retransmits only the bits (lower bits) that are susceptible to error, without retransmitting the bits (higher bits) that are not readily susceptible to error and that are obtained by processing in a modulation section 11. A reception apparatus 10B of the communication partner performs error correction processing using the bits (higher bits) and that are stored in memories 16 and 17 and that are not readily susceptible to error, and the bits that are obtained by retransmission and that are susceptible to error (lower bits).
US07702024B2	Sampling frequency offset estimation apparatus and method for OFDM system A sampling frequency offset estimation apparatus and method to be applied to an OFDM (orthogonal frequency division multiplexing) system are provided. The apparatus includes an ADC (analog-to-digital converter) sampling a received signal based on a predetermined sampling frequency; a FFT (Fast Fourier Transform) unit transforming the sampled received signal into a frequency domain; a phase calculator calculating phase shifts of pilot subcarriers of the sampled received signal which has been transformed into the frequency domain; a determiner calculating phase shift reaching times at which samples of the pilot subcarriers shift due to the phase shift; a time offset calculator calculating a sampling time offset using the pilot subcarriers, and a frequency offset calculator calculating a sampling frequency offset based on the phase shift reaching times and the sampling time offset.
US07702022B2	Communication system, transmitting device, receiving device, and communication device capable of wideband communications via impulses A communication system for transmitting and receiving a send data item is disclosed that comprises a transmitting device and a receiving device. The transmitting device includes a data generating unit to generate a data item by modulating the send data item, an impulse generating unit to generate an impulse corresponding to the generated data item, a transmitting channel selecting unit to allow a frequency component corresponding to a transmitting channel to pass through while the impulse attempts to pass therethrough, and a transmitting unit to transmit the impulse as a signal. The receiving device includes a receiving unit to receive the signal, a receiving channel selecting unit to allow the frequency component corresponding to the transmitting channel to pass through while the signal attempts to pass therethrough, and a data restoring unit to extract the impulse from the signal to restore the send data item according to the extracted impulse.
US07702021B2	Decoding of digital video standard material during variable length decoding Systems and methods for decoding of digital video standard material during variable length decoding are disclosed. In one embodiment, a method in accordance with the present invention may comprise, for example, receiving a first portion of encoded video data stream and a second portion of encoded video data stream, wherein the first portion and the second portion are parts of one encoded symbol in an encoded video data stream; generating a concatenated video data stream comprising the first portion and the second portion; and decoding the concatenated video data stream.
US07702020B2	Multi-standard variable block size motion estimation processor An apparatus generally having a first circuit and a second circuit is disclosed. The first circuit may be configured to generate a plurality of sum values by adding a plurality of pixel difference values between a current block and a reference block, one of the sum values corresponding to each of a plurality of smallest partitions of the current block. The second circuit configured to (i) generate a plurality of intermediate values from the sum values, one of the intermediate values corresponding to each of a plurality of possible partitions of the current block, (ii) store a plurality of lowest values among the intermediate values as the current block is moved through a search window and (iii) generate a motion signal conveying at least one motion vector based on the lowest values.
US07702016B2	System and process for compressing and decompressing multiple, layered, video streams of a scene captured from different viewpoints forming a grid using spatial and temporal encoding A system and process for compressing and decompressing multiple video streams depicting substantially the same dynamic scene from different viewpoints that from a grid of viewpoints. Each frame in each contemporaneous set of video frames of the multiple streams is represented by at least a two layers—a main layer and a boundary layer. Compression of the main layers involves first designating one or more of these layers in each set of contemporaneous frames as keyframes. For each set of contemporaneous frames in time sequence order, the main layer of each keyframe is compressed using an inter-frame compression technique. In addition, the main layer of each non-keyframe within the frame set under consideration is compressed using a spatial prediction compression technique. Finally, the boundary layers of each frame in the current frame set are each compressed using an intra-frame compression technique. Decompression is generally the reverse of the compression process.
US07702012B2	Infinite impulse response filter circuit and magnetic disk drive An infinite impulse response (IIR) filter circuit in accordance with an embodiment of the invention has transfer function coefficients that are adaptively changed. Using a Nth-order polynomial A(z) and a polynomial B(z) whose order is not higher than N, the transfer function is defined by L ⁡ ( z ) = B ⁡ ( z ) A ⁡ ( z ) ; where ∏ i = 0 - 1 ⁢ ⁢ ( z 2 + 1 - 2 ⁢ ⁢ k i ⁢ z ) = 1 is also defined. The polynomial A(z) is transformed to make the term of the Nth power of z equal to 1. If the order of the polynomial A(z) is even, the polynomial A(z) is determined to satisfy the condition: A ⁡ ( z ) = 1 1 + l ⁢ ( ∏ i = 0 N / 2 - 1 ⁢ ⁢ ( z 2 + 1 - 2 ⁢ ⁢ k 2 ⁢ ⁢ i ⁢ z ) + l ⁡ ( z 2 - 1 ) ⁢ ∏ i = 0 N / 2 - 2 ⁢ ( z 2 + 1 - 2 ⁢ ⁢ k 2 ⁢ ⁢ i + 1 ⁢ z ) ) If the order N is odd, the polynomial A(z) is determined to satisfy the condition: A ⁡ ( z ) = 1 1 + l ⁢ ( ( z + 1 ) ⁢ ∏ i = 0 ( N - 1 ) / 2 - 1 ⁢ ⁢ ( z 2 + 1 - 2 ⁢ ⁢ k 2 ⁢ ⁢ i ⁢ z ) + l ⁡ ( z - 1 ) ⁢ ∏ i = 0 ( N - 1 ) / 2 - 1 ⁢ ( z 2 + 1 - 2 ⁢ ⁢ k 2 ⁢ ⁢ i + 1 ⁢ z ) ) where l and ki(i=0, 1, 2,,,) are real numbers.
US07702005B2	Method for transmitting and/or receiving audio data of a plurality of audio sources through a single SPDIF link, and related apparatus A method for transmitting audio data of a plurality of audio sources through a single SPDIF link, includes: sequencing and multiplexing the audio data of the plurality of audio sources to pack the audio data of the plurality of audio sources into a plurality of frames of a block; performing bi-phase mark encoding on the audio data in the frames; appending preambles Z, X, and Y of the AES3/SPDIF stream format to the frames according to the number of audio sources in a first mode, or appending preambles Z, X, and Y of the AES3/SPDIF stream format and a specific preamble differing from preambles Z, X, and Y to the frames according to the number of audio sources in a second mode; and outputting the frames carrying the audio data into the SPDIF link with a frame rate greater than an audio sampling frequency of one of the audio sources.
US07702003B2	Multi-path detection method for CDMA receivers The present invention provides a method for a multi-path detection analysis and selectivity of CDMA signals using spread spectrum receivers using a correlation technique. The invention is based on determining by the spread spectrum receiver whether a distortion of a received radio frequency signal, caused by a multi-path component of said received signal, meets a predetermined condition using a pre-selected correlation analysis of said received signal. This invention is generally applicable to global navigation satellite system (GNSS) receivers and it is particularly useful in GNSS receivers, such as GPS (global positioning system) and Galileo receivers. The important goal of this invention is to provide a simple method for identifying signals that are corrupted by multi-path effects, and can be excluded from position calculation in the GNSS receivers.
US07701999B1	Non-coherent multiuser receiver and method for aiding carrier acquisition in a spread spectrum system Disclosed is a method for acquiring a user signal from among several received from multiple users in a single burst. The method includes receiving a plurality of user signals in a single transmission burst, suppressing multiuser interference among at least some of the plurality of received signals, and determining a carrier frequency of at least one signal from among the interference suppressed plurality of received signals. Said signals may rotate due to a lack of synchronization while being equalized. Also described is a multiuser receiver for acquiring at least one user signal from among several user signals received from multiple users in a single burst. An antenna is for receiving a plurality of user signals in a single spread spectrum transmission burst, a matched filter is for despreading the signals, a multiuser equalizer is for suppressing mutual interference among at least a portion of the plurality of user signals, and a carrier lock circuit is for determining a carrier frequency of at least one user signal of the portion.
US07701995B2	Nitride semiconductor laser element A nitride semiconductor laser element, comprises; nitride semiconductor layers in which a nitride semiconductor layer of a first conduction type, an active layer, and a nitride semiconductor layer of a second conduction type that is different from the first conduction type are laminated in that order; a cavity end face formed by the nitride semiconductor layers; and a protective film formed on the cavity end face, the protective film has a region in which an axial orientation of crystals is different in the direction of lamination of the nitride semiconductor layers.
US07701994B2	Nitride semiconductor light-emitting device and method for fabrication thereof An adhesion layer of a hexagonal crystal is laid on a facet an optical resonator of a nitride semiconductor laser bar having a nitride-based III-V group compound semiconductor layer, and a facet coat is laid on the adhesion layer. In this way, a structure in which the facet coat is laid on the adhesion layer is obtained.
US07701993B2	Semiconductor optical device and a method of fabricating the same In order to provide excellent device characteristics and enhance fabrication yield and run-to-run reproducibility in a buried device structure using a low mesa on a p-type substrate, a cross sectional configuration before growth of a contact layer of a device, i.e., after growth of an over-cladding layer is flattened so as not to cause a problem in crystal quality of the contact layer. A mesa-stripe stacked body including at least a p-type cladding layer (2), an active layer (4) and an n-type cladding layer (6) is formed on a p-type semiconductor substrate (1), a current-blocking layer (8) is buried in both sides of the stacked body, and an n-type over-cladding layer (9) and an n-type contact layer (10) are disposed on the current-blocking layer (8) and the stacked body. The n-type over-cladding layer (9) is made of a semiconductor crystal having a property for flattening a concavo-convex shape of upper surfaces of the current-blocking layer (8) and the stacked body.
US07701992B2	Semiconductor laser diode having graded interlayer A semiconductor laser diode having a graded interlayer is provided. The semiconductor laser diode has the graded interlayer between an active layer composed of InGaN and an electron blocking layer (EBL) composed of AlGaN. The graded interlayer is composed of InxAlyGa1-x-yN(0≦x≦0.2, 0≦y≦0.5) and is formed by grading a composition of group III materials. Accordingly, the active layer and the p-EBL have a reduced difference in rigidities and lattice parameters, and an abrupt gradient of an energy band and generation of a strain can be avoided in an interface between the active layer and the p-EBL. Since a crack can be prevented from being generated along the interface between the active layer and the p-EBL when a cleavage facet is formed, characteristics of the semiconductor laser diode can be improved.
US07701991B2	High-power infrared semiconductor diode light emitting device A semiconductor laser diode using the aluminum gallium, arsenide, gallium indium arsenide phosphide, indium phosphide, (AlGaInAs/GaInAsP/InP) material system and related combinations is disclosed. Both the design of the active layer and the design of the optical cavity are optimized to minimize the temperature rise of the active region and to minimize the effects of elevated active layer temperature on the laser efficiency. The result is a high output power semiconductor laser for the wavelengths between 1.30 and 1.61 micrometers for the pumping of erbium doped waveguide devices or for direct use in military, medical, or commercial applications.
US07701989B2	Laser diode driving apparatus A laser diode driving apparatus comprising an oscillator (11) for generating a high-frequency signal; an amplifier (12) for amplifying the high-frequency signal and outputting the amplified high-frequency signal; current mirror circuits (7, 8 and 9) for receiving the output current of the amplifier (12) and driving multiple laser diodes (1, 2 and 3), respectively; a DC current supply source (10) for supplying a DC current to the current mirror circuits, wherein the laser diode is driven using a current obtained by superimposing the high-frequency signal on the DC current, the laser diode driving apparatus further comprising a high-frequency signal superimposed amplitude setting circuit (14) for changing the amplitude of the amplifier so as to be suited for the selection of the current mirror circuit.
US07701988B2	Optical transmit assembly including thermally isolated laser, temperature sensor, and temperature driver An optical transmit assembly in which a laser and temperature sensor are mounted on a first substrate without other heat generating components. Other heat generating components may be mounted on a second substrate that is separated from the first substrate by a thermally resistance mechanism. Accordingly, heat that is generated by other components is not as easily transferred to the laser and temperature sensor. This allows the temperature of the temperature sensor to more closely track the temperature of the laser, and allows for more efficient cooling of the laser.
US07701979B2	Residential ethernet node apparatus for maintaining starting point of superframe and method for processing same Disclosed is a Residential Ethernet node apparatus for maintaining a starting point of a superframe, the Residential Ethernet node apparatus comprising a synchronous queue for receiving and temporarily storing synchronous data, in order to transmit the synchronous data by inserting the synchronous data into a transmission cycle, a parser for receiving asynchronous frames from at least one exterior source, parsing the asynchronous frames according to characteristics of the asynchronous frames, a plurality of the asynchronous queues for separately storing the asynchronous frames received from the parser according to the characteristics of the asynchronous frames, a scheduler for receiving the asynchronous frames from the asynchronous queues, and transmitting the received asynchronous frame when it is possible to transmit the received asynchronous frame, and a multiplexer, which receives a synchronous frame from the synchronous queue and an asynchronous frame from the scheduler so as to transmit the synchronous frame and asynchronous frame in a form of a transmission cycle while maintaining a starting point of a superframe.
US07701978B2	Method and apparatus for maintaining synchronization in a communication system A central entity and/or a remote device in a communication system are designed to address the problem of maintaining upstream synchronization in the remote device after loss of the downstream signal. The system maintains upstream transmissions from the remote device in a Synchronous-Code Division Multiple Access (S-CDMA) or perhaps Synchronous-Time Division Multiple Access (S-TDMA) mode that does not degrade performance caused by via poor upstream timing or a need for re-ranging. By providing novel functionality at the central entity for synchronizing first and second downstream signals and/or by providing novel functionality at the remote device for determining a symbol clock offset between a first terminated downstream signal and a second re-acquired downstream signal, embodiments of the present invention maintain synchronization through the loss of the downstream signal, thereby minimizing the need for re-ranging and avoiding poorly timed upstream bursts.
US07701970B2	Protocol negotiation for a group communication system Methods and systems are provided in a group communication system for dynamically changing a version of a group communication protocol from a first version to a second version transparently to external sources and destinations. The system accommodates newly joining members that can only support versions of the protocol other than the version currently in use without interruption in service. Similarly, the system can upgrade its operating version of the group communication protocol to improve performance when a member having relatively low capabilities exits the group.
US07701962B2	Wireless communication apparatus and wireless communication method A wireless communication apparatus for performing wireless communication using a first channel having a first frequency bandwidth, and a second channel formed of both the first channel and a second communication channel, the second communication channel having a frequency bandwidth equal to the first frequency bandwidth. A first generation of a first declaration frame for declaring occupation of the first channel for a specified period, and a second generation of a second declaration frame for declaring occupation of the second communication channel for a specified period after the first declaration frame are generated and transmitted. Transmission timings are set so that the first and second declaration frames are transmitted at the highest priority of all the other frames.
US07701951B2	Resource reservation and admission control for IP network A resource reservation and admission control scheme uses pseudowires to reserve bandwidth over a layer-2 and/or layer-3 network. The pseudowires are associated with ports on different network processing devices. During a resource reservation and admission control session, the physical links used by the pseudowire are selected and reserved to more effectively allocate network bandwidth. The negotiated pseudowire is then used to transport content for a communication session over the network. In one example application, the resource reservation and admission control scheme is used during a Downstream External PHY Interface (DEPI) session for pseudowires established between a Modular Cable Modem Termination System (M-CMTS) Core and an Edge Quadrature Amplitude Modulation Interface (EQAM) device. However, the reservation protocol can be used in any application that needs to reserve bandwidth over an Internet Protocol (IP) network.
US07701942B2	Network monitor system, data amount counting method and program for use in the system In a network monitor system having a plurality of line cards, each of the line cards monitors a communication data amount in consideration of a group or a finer group with conditions other than an IP address added thereto. Each of the line cards controls the communication data amount by the use of a line interface section 11, a header extraction section 12, a flow identification section 13, and a counter section 16.
US07701940B2	Inter-domain point-to-multipoint path computation in a computer network In one embodiment, distributed path computation elements (PCEs) collaboratively build local portions of an inter-domain P2MP path to each path destination or to each ingress border router of one or more respective successor domains based on a cost associated with using one or more local ingress border routers received from each predecessor domain. Once a furthest destination is reached, each PCE may recursively return a list of local ingress border routers used in the P2MP path to each predecessor domain, where each PCE receiving the list correspondingly prunes segments of its computed local portion of the P2MP path that lead to unused successor ingress border routers, and sends a prune message to its predecessor domains accordingly. A root PCE receives the final prune message(s) and a representation of each locally computed portion of the inter-domain P2MP path, and combines the portions into a final inter-domain P2MP path.
US07701939B2	Optical access network system and multicast communication method thereof An OLT (Optical Line Terminal) having a multicast control unit, which controls connections dedicated for the multicast services, and a plurality of PON (Passive Optical Network) interfaces for accommodating subscriber terminals and each PON interface is provided with a unicast dedicated port for the unicast communication. When the multicast data packets are received at the multicast control unit, it identifies every PON interfaces as distribution destinations of those packets with referring to a pre-defined table and distributes first copied packets to respective identified PON interfaces. In each PON interface, it identifies every subscriber terminals as transmission destinations of the distributed multicast data packets with referring to another pre-defined table, and the second copied multicast data packets are multiplexed with the unicast data packets and transmitted to the subscriber terminals.
US07701938B1	Advanced multicast support for cable Embodiments may comprise a cable network that shifts control plane functionality for multicast sessions to a cable modem termination system allowing multicast without a cable modem snooping messages from a coupled device. Another embodiment may comprise a network including a device to generate a request to join a multicast session over a cable network, a cable modem termination system in communication with the device, the cable modem termination system to receive the request from the device and to generate a flow identifier to associate with the multicast session, and a cable modem in communication with the cable modem termination system and the device, the cable modem to receive the flow identifier from the cable modem termination system and forward the multicast session to the device from the cable modem termination system based on the flow identifier. Other embodiments may comprise an apparatus that has a port to receive a request from a cable modem to join a multicast session, and circuitry to generate a flow identifier to associate with the multicast session and communicate the flow identifier to the cable modem to allow the cable modem to forward the multicast session to a device.
US07701931B2	Network communication apparatus and method for performing a T.38 communication function using a voice capability of a gateway apparatus A network communication apparatus that includes a function for performing communications via an IP network and that includes an ITU-T standard T.38 communication function but does not include a voice communication function is disclosed. The network communication apparatus includes: a unit configured to generate a call connection signal including T.38 communication capability and dummy voice capability to start call connection operation; and a unit configured to perform T.38 communication operation after sending a dummy CNG packet when detecting that a second network communication apparatus at the other end does not include the T.38 communication function based on a call connection signal received from the second network communication apparatus.
US07701921B2	Apparatus and method for supporting soft combining of scheduling signals for uplink packet data service in a mobile communication system A mobile communication system using an Enhanced Uplink Dedicated transport Channel (EUDCH) for uplink data transmission, wherein a user equipment (UE) receives cell group information from a radio network controller (RNC), and soft-combines scheduling signals or acknowledge/negative-acknowledge (ACK/NACK) signals received from cells belonging to the same cell group according to the cell group information, thereby improving detection performance.
US07701917B2	Channel estimation for a wireless communication system with multiple parallel data streams To recover multiple data streams transmitted simultaneously, a first channel estimate is derived for a wireless channel based on received pilot symbols. Detection is performed on received data symbols using the first channel estimate to obtain detected symbols for a first data stream. These detected symbols are decoded to obtain a decoded first data stream, which is re-encoded to obtain remodulated symbols. A second channel estimate is derived based on the remodulated symbols. The first and second channel estimates are combined to obtain a third channel estimate having higher quality. Interference due to the first data stream is estimated using the third channel estimate and canceled from the received data symbols. Detection is performed on interference-canceled symbols using the third channel estimate to obtain detected symbols for a second data stream. These detected symbols are further decoded to obtain a decoded second data stream.
US07701910B2	Reverse link load estimation using reference signal A reference signal including a quality indication is injected into the reverse link signal received at a base station. The transmit power of the reference signal is controlled by the base station through reverse link power control, and the base station estimates the reverse link load from the transmit power of the reference signal. As the load increases, the transmit power must increase to overcome interference. The reference signal may be generated by a signal generator within the base station; by a mobile station hardwired to the base station; or by a mobile station proximate the base station, sending the reference signal over the air interface. The reverse link load may be estimated directly from reference signal transmit power, or from the reference signal transmit power minus a minimum reference signal transmit power in the absence of interference.
US07701904B2	Roaming method for maintaining connectivity through heterogeneous wireless networks, and system for realizing the same A roaming method for maintaining connectivity between a client and a server through heterogeneous wireless networks includes the steps of establishing an initial connection between the client and the server through a first selected one of the heterogeneous wireless networks, detecting disconnection of the initial connection, and establishing a current connection between the client and server through a second selected one of the heterogeneous wireless networks upon detecting that the initial connection has been disconnected. A system, which includes the client and the server, for realizing the roaming method is also disclosed.
US07701900B2	Device discovery and channel selection in a wireless networking environment A method and apparatus for device discovery and channel selection in a wireless networking environment are described. As part of an automatic network configuration process, a super node sequentially traverses the available channels, broadcasting discovery messages including the channel switching schedule. Wireless nodes that receive those broadcast messages switch channels in lock step with the super node, sending discovery replies on those channels over which the broadcast discovery messages are successfully received. An association is generated identifying accessible nodes and the channels through which those nodes may be accessed. An optimum channel may then be selected based on this association information. Sub-nodes may repeat the broadcast discovery messages, and relay any discovery replies to the super node. The super node may then identify sub-nodes that may be used as proxies to access nodes that would otherwise be inaccessible.
US07701899B2	Base station identification In identifying base stations in cellular telecommunication, system information is normally sent out on the Broadcast Control Channel, BCCH, taking up the first time slot (B) of a TDMA frame. In case of interference from other base station transmitting on the same frequency or when neighboring base station use the same identity code, BSIC, another BCCH (b) is transmitted on another time slot. The double BCCH, according to the invention, makes it possible to identify base stations, for example suitable as handover candidates in urban environments, even if they have sent their regular control information on the same frequency or with the same BSIC.
US07701895B2	Method and system for acoustic communication An acoustic transducer arrangement and system and method utilizing the same are presented. The acoustic transducer arrangement includes: an acoustic transmitter assembly including an array of transmitter elements operable to generate together a multi-frequency acoustic signal; and a control unit preprogrammed to operate the acoustic transmitter assembly in accordance with digital data stream indicative of a received signal to generate the multi-frequency acoustic signal indicative of the received signal.
US07701893B2	Method and system for efficient distribution of multicast services in a mobile network An acknowledged MBMS service in which a procedure for providing retransmissions of incorrectly received data blocks is performed, together with an outer coding of the data blocks to be transmitted to the MBMS MSs. A sequence of data blocks carrying information related to the MBMS service is encoded at a BSS (Base Station Sub-system) of the mobile network by an outer coding unit. After the outer coding, the resulting data block sequence is sent to the MBMS MSs. If a data block of the outer coded sequence is badly received by a number of MBMS MSs, corresponding negative acknowledgements (nacks) are sent by such MSs to the BSS. The MSs also notify the BSS, with a positive acknowledgement, if they succeed in outer code decoding the sequence of the MBMS carrying information data blocks, in spite of possible badly received data blocks. The BSS manages retransmissions of the nacked data blocks taking into account the positive acknowledgements related to the outer code decoding by disabling retransmission of nacked data blocks of a positively acknowledged sequence.
US07701891B2	Data handling in a distributed communication network In one embodiment, a system for data handling in a distributed communication network includes one or more data-handling nodes (DHNs) each residing at one of one or more centrals that are each operable to receive a stream of first data units from a routing system. The stream of first data units includes both stored mission data (SMD) and telemetry data having originated at one or more remote units. Each DHN is operable, in near real time, to remove redundant instances of first data units from the stream of first data units, properly order first data units in the stream of first data units received at the central out of order, remove misconfigured first data units from the stream of first data units, extract the SMD from the stream of first data units, generate second data units from the extracted SMD, and communicate a stream of the second data units to one or more interface data processors (IDPs).
US07701884B2	Network communications bandwidth control A method for controlling real time data communications over a packet based network comprises steps of dynamically measuring data packet loss between a receiver and a sender on the network, dynamically measuring data latency between the sender and receiver, and comparing the dynamically measured data packet loss to a loss limit and comparing the dynamically measured data latency to a latency limit. If one or both of the loss limit or the latency limit is exceeded, then the method may include reducing the rate of data transmission from the sender.
US07701881B1	System and method for determining the mergeability of spanning tree instances A system and method provide for reducing a number of topology instances in a network portion implementing a multiple instance topology. Various embodiments further provide for determining if one or more of the topology instances are merge-able or conditionally merge-able to form a lesser number of representative topology instances, and if so, for causing merging of the topology instances.
US07701877B1	Methods and apparatus for representing and querying storage area network (SAN) topology A topology representation stores the topology in database tables corresponding to a topology schema for representing the manageable entities and relations in the SAN. A management application performs topology manipulations via database queries operable to process the database tables representing the topology, thus avoiding loading the entire topology into memory. Accordingly, configurations herein need not store the entire topology representation in order to process the topology by performing relational database queries that effectively perform the topology processing via the database query engine rather than a memory resident data structure.
US07701876B2	Message transmission method and device in mixture of private network and public network A message transmission method and device are provided. The message transmission method, which is carried out by a node in a mixed network comprised of a private network including at least one node and a public network, includes: checking whether an address of a destination node to receive a message is recorded in a communication node list of the node, when the address of the destination node is not the address of the node; transmitting the message to the destination node recorded, when it is determined that the address of the destination node is recorded in the communication node list; and transmitting the message and the address of the destination node to a node having an address closest to the address of the destination node among the addresses recorded in the communication node list, when the address of the destination node is not recorded in the communication node list.
US07701873B2	Method for the discovery of devices connected to an IP network and device to carry out said method The present invention relates to IP networks and, more particularly, local area networks, for example home networks. It concerns the manner in which devices connected to such networks obtain and update knowledge of the other compatible devices connected to the network. To do this, the invention is based on a finite-state machine, comprising connected, disconnected and standby states. The changes of state take place on receipt of messages, requests or replies from the other devices, or on expiry of timers in the absence of receipt of messages.
US07701853B2	Method for policing-based adjustments to transmission window size The invention includes a method for determining a window size for a connection. One method according to the invention includes determining a peak information rate for the connection, determining a round trip time for the connection, and determining the window size using the peak information rate and the round trip time. Another method includes determining a token bucket size of a token bucket in response to detecting a condition associated with the token bucket and determining the window size using the token bucket size. Another method includes determining a plurality of connection window sizes for each of a plurality of connections. In this embodiment, the connection window sizes are determined by distributing a total window size across the plurality of connections. A determined window size may be communicated to at least one of a sender of the connection, a receiver of the connection, and a policing module.
US07701851B2	System and method for the control of the transmission rate in packet-based digital communications A transmission bit rate control mechanism for a packet-based communication system in which sender transmission bit rates can vary over time is provided. The transmission bit rate mechanism includes a receiver recording mechanism, which receives transmission time information, computes and records statistical parameters of packets received from a sender; and a receiver processing mechanism, which selectively computes a new transmission bit rate using the recorded statistical parameters, and communicates a new transmission bit rate to the sender.
US07701849B1	Flow-based queuing of network traffic A method is provided for queuing packets. A packet may be received and its flow identified. It may then be determined whether a flow queue has been assigned to the identified flow. The identified flow may be dynamically assigning to an available flow queue when it is determined that a flow queue has not been assigned to the identified flow. The packet may be enqueued into the available flow queue.
US07701848B2	Efficient trap avoidance and shared protection method in survivable networks with shared risk link groups and a survivable network An efficient trap avoidance and shared protection method in a survivable network with shared risk link groups. The invention includes a fast and efficient heuristic algorithm for avoiding traps, an algorithm, which may also be applied effectively to shared SRLG protection. Compared to other existing algorithms, the algorithm embodied in the present invention runs much faster, and yet falls into few traps, and achieves a much higher bandwidth efficiency. This technology can be applied to MPLS, ATM, SONET, WDM, and other high-speed survivable network designs.
US07701845B2	Forwarding data in a data communications network An apparatus is described for forwarding data in a data communications network having as components nodes and links therebetween in which nodes obtain a reachability metric between a neighbor node and one or more other nodes in the network and in which a repair path is created between an instigating repair node and a receiving repair node around a failure component therebetween. A propagatable repair address for the receiving repair node is reachable by the repair path notvia the failure component. The apparatus is arranged to treat propagatability of the repair address differently via the failure component than via other components.
US07701832B2	Optical record carrier scanning device An optical scanning device scans optical record carriers, such as three optical record carriers, where each optical record carrier has an information layer having a depth which is different from the information layer depth of other optical record carriers, where d3
US07701828B2	Optical recording system and method An optical recording system and method. A radiation source provides a radiation beam writing marks separated by spaces on a rewritable optical disc. A pulse generator generates a recording pulse signal based on a preset data signal to drive the radiation source, wherein the recording pulse signal comprises a cooling pulse, and wherein the preset data signal corresponds to a mark and space of equal length and is recorded onto the rewritable optical disc in terms of a written mark and space. A pulse controller determines a final width for the cooling pulse according to a difference between lengths of the written mark and the written space.
US07701826B2	Optical disk drive with temperature based control of RF superimposed current An optical information read/write apparatus according to the present invention includes: a light source 1 that emits a laser beam to access an information storage medium optically; a laser driver 51a for supplying drive current to a semiconductor laser as the light source 1; an RE superimposed current generator 51c for adding RE superimposed current to the drive current; a temperature sensor 35 for detecting a temperature around the light source 1; and a control section for switching the values of the RE superimposed current according to the temperature detected.
US07701821B2	Optical disk recording/reproducing apparatus and test writing method thereof Within an optical disk recording/reproducing apparatus, equipped with a test writing method during the recording operation, for improving accuracy on calculating the most-suitable power and recording quality, thereby recording data through irradiation of a laser beam of a predetermined power onto a optical disk, defining test writing areas on an inner periphery side and an outer periphery side and an area recordable with data between those inner periphery side and outer periphery side, or reproducing data recorded thereon from a reflection light thereupon, wherein a controller circuit 9 executes a test writing process, with selecting a test writing area on a periphery side being large in a ratio of difference, upon basis of ratios of the differences between powers on an inner periphery and an outer periphery of said disk, which are set up at present, and control data on the inner periphery and the outer periphery, which are recorded on said optical disk loaded therein, when executing the test writing process for determining the predetermined laser power of the laser beam during executing a recording process within the apparatus.
US07701819B2	Recording medium, method of configuring control information thereof, recording and reproducing method using the same, and apparatus thereof A data structure of a control information for use with a computer-readable recording medium having multiple recording layers. The control information includes first information unit for a first recording layer and second information unit for a second recording layer. The first information unit includes write strategy parameters for a first write strategy type to be used for the first recording layer, and the second information unit includes write strategy parameters for a second write strategy type to be used for the second recording layer. The second write strategy type being the same or different from the first write strategy type.
US07701818B2	Optical disk apparatus with controller for changing an amount of lifting and a control method thereof In an optical disk apparatus, for reproducing information recorded on a recording surface of an optical disk, by setting such a focus condition that a tracking servo-error level comes to be maximum with a reflection light from the recording surface, while irradiating a light beam of a semiconductor laser, within a signal processor portion 300 for amplifying a RF signal reproduced from the optical disk is provided an equalizer 330 for lifting up high-frequency region of the RF signal, wherein an optimal control is made on an amount of lifting (i.e., EQ Boost Value) by the equalizer, depending upon a difference (ΔAF) between a focus offset amount at which the RF signal reproduced comes to be maximum and a focus offset amount at which jitter of the RF signal reproduced come to be minimum.
US07701815B2	Additionally recordable information recording medium, information recording method, information reproducing method, information recording apparatus and information reproducing apparatus An additionally recordable information recording medium has a complicated management structure for managing an unrecorded area. Therefore, there are problems that it takes a long time for a disk to startup and it is difficult to build a recording/reproducing system. The additionally recordable information recording medium according to the present invention includes a simple data structure for managing a location information for a recorded area located at the rearmost location in a user data area. An additionally recordable apparatus according to the present invention also includes means for updating the location information of the recorded area so that the recorded area located at the rearmost location in the user data area is always managed.
US07701799B2	Semiconductor device A semiconductor device may include a decoder for decoding a plurality of internal command signals and outputting a first Y-address enabling signal; a Y-address enabling signal generator for receiving the first Y-address enabling signal and outputting a second Y-address enabling signal having a predetermined enabled period; a multiplexer (MUX) for receiving the first Y-address enabling signal and the second Y-address enabling signal and selectively outputting any one thereof as a Y-address enabling signal; and a MUX controller for controlling the MUX such that the MUX selects any one of the first Y-address enabling signal or second Y-address enabling signal according to an operation mode of the semiconductor device.
US07701794B2	Semiconductor memory device A semiconductor memory device comprises: word lines; global bit lines intersecting therewith; local bit lines partitioned into N sections along the global bit lines and aligned with a same pitch as the global bit lines; N memory cell arrays each of which includes memory cells each having a vertical transistor structure connected to the local bit lines at a lower portion and each being formed at an intersection of the word line and the local bit line, and is arranged corresponding to each section of the local bit lines; local sense amplifiers for amplifying a signal read out from a selected memory cell to the local bit line and for outputting the signal to the global bit line; and global sense amplifiers for coupling the signal transmitted from the local sense amplifier corresponding to the selected memory cell through the global bit line to an external data line.
US07701792B2	Sensing margin varying circuit and method thereof A sensing margin varying circuit and method thereof are provided. The example sensing margin varying circuit may control the skew of a ready signal and may include a plurality of semiconductor elements which are connected to a plurality of accelerating transistors positioned on a current path between a node outputting the ready signal and a ground voltage, each of the plurality of accelerating transistors selectively controlled so as to adjust a duration of a logic transition of the ready signal. The example method may control the skew of a ready signal and may include selectively controlling a plurality of accelerating transistors positioned on a current path between a node outputting the ready signal and a ground voltage, each of the plurality of accelerating transistors selectively controlled so as to adjust a duration of a logic transition of the ready signal.
US07701788B2	Apparatus and method for selectively configuring a memory device using a bi-stable relay The disclosed embodiments of the present invention include a semiconductor memory apparatus having a selectable memory capacity. In one embodiment, a system includes input, output, and data storage devices, a processor coupled to the devices, a memory device coupled to the processor, and a configuration circuit interposed between the processor and the memory device to selectively couple lines in the address, control and data busses of the processor to lines in the address, control and data busses of the memory device. In another embodiment, a memory device includes an array coupleable to one or more busses of an external device and a configuration circuit between the array and the busses of the external device to selectively couple the busses to the memory cell array. In a particular embodiment, the configuration circuit includes one or more bi-stable relays, such as Micro-Electrical-Mechanical System (MEMS) relays.
US07701785B2	Memory with high speed sensing A memory including a data line, a sense amplifier, and an array of memory cells. The memory includes a transistor for coupling the data line to memory cells of the array for reading. The transistor is biased at a voltage that is higher than a voltage that the data line is biased during precharging. The transistor is part of a regulation circuit. The regulation circuit includes transistors with a higher dielectric breakdown voltage than transistors of the sense amplifier.
US07701784B2	Semiconductor memory device which includes memory cell having charge accumulation layer and control gate A semiconductor memory device includes a memory cell unit, word lines, a driver circuit, and a voltage generator. The memory cell unit includes a plurality of memory cells connected in series. Each of the memory cells includes a charge accumulation layer and a control gate. The word lines are connected to the control gate. The driver circuit selects one of the word lines and applies voltages to a selected word line and unselected word lines. The voltage generator includes first and second charge pump circuits and outputs a voltage generated by the first and second charge pump circuits to the driver circuit. The first charge pump circuit is exclusively used to generate a voltage for a first word line. The first word line is one of the unselected word lines located adjacent to the selected word line.
US07701771B2	Memory device including 3-dimensionally arranged memory cell transistors and methods of operating the same A memory device may include L semiconductor layers, a gate structure on each of the semiconductor layers, N bitlines, and/or a common source line on each of the semiconductor layers. The L semiconductor layers may be stacked, and/or L may be an integer greater than 1. The N bitlines may be on the gate structures and crossing over the gate structures, and/or N may be an integer greater than 1. Each of the common source lines may be connected to each other such that the common source lines have equipotentiality with each other.
US07701764B2	Apparatus and method for reduced peak power consumption during common operation of multi-NAND flash memory devices System and method for executing a global memory command in a multi-chip non-volatile memory device having a plurality of non-volatile memories. The global memory command is received at each non-volatile memory concurrently. The memory command is initiated at different times relative to receiving the global memory command for at least two of the plurality of non-volatile memory to mitigate peak power consumption.
US07701762B2	NAND memory device and programming methods A NAND Flash memory device is described that can reduce bit line coupling and floating gate coupling during program and verify operations. Consecutive bit lines of an array row are concurrently programmed as a common page. Floating gate coupling during programming can therefore be reduced. Multiple verify operations are performed on separate bit lines of the page. Bit line coupling can therefore be reduced.
US07701748B2	Nonvolatile memory devices using variable resistors as storage elements and methods of operating the same A nonvolatile memory device includes a first electrode and a second electrode, and a variable resistor interposed between the first and second electrodes. The variable resistor has a critical voltage, and a resistance-voltage characteristic of the variable resistor is switched at a voltage higher than the critical voltage, so that a resistance of the variable resistor is higher at a read voltage applied after the switching of the resistance-voltage curve than at a read voltage applied before the switching of the resistance-voltage curve. Methods of operating a nonvolatile memory device include setting a plurality of write voltages higher than an initial critical voltage, assigning respective data values to states in which a resistance-voltage characteristic is switched at the write voltages, setting a read voltage lower than the initial critical voltage, and reading the data values by measuring current flowing through the variable resistor in response to the read voltage.
US07701746B2	Method of making memory cell with voltage modulated sidewall poly resistor A method of making a two terminal nonvolatile memory cell includes forming a first electrode, forming a charge storage medium, forming a resistive element, and forming a second electrode. The charge storage medium and the resistive element are connected in parallel between the first and the second electrodes, and a presence or absence of charge being stored in the charge storage medium affects a resistivity of the resistive element.
US07701744B2	Method of arranging fuses in a fuse box of a semiconductor memory device and a semiconductor memory device including such an arrangement A semiconductor memory device may include a memory cell array and at least one fuse box. The memory cell array may include a plurality of sub-array blocks, and a fuse box may include a plurality of fuse groups, each group corresponding to a sub-array block. Each fuse group may have a plurality of fuses, wherein the fuses are intermittently arranged such that fuses of the same fuse group are not adjacent to each other. Each fuse group may further include a master fuse and a fuse mode determining circuit for determining a fuse-on-mode or a fuse-off-mode for the repair operation of a sub-array block. Consequently, during a repair operation using a conventional laser having a relatively large beam spot, the designated fuse of one fuse group as well as adjacent fuses of a different group may be cut without hindering the repair operation of the sub-array block. Accordingly, increasing the pitch size of the fuses to accommodate the relatively large beam spot of a conventional laser may not be necessary, thus allowing a reduction in the size of the fuse box (and the overall semiconductor memory device). Additionally, the above fuse arrangement may reduce costs by permitting the use of conventional laser equipment instead of more expensive laser equipment having a relatively small beam spot.
US07701735B2	Converter and driving method thereof A converter and a driving method thereof are provided. The converter includes a main switch and a switching controller. The switching controller controls on/off of the main switch by using a first voltage corresponding to an output voltage and a first current flowing to the main switch. The switching controller determines a reference count according to the first voltage, and determines a peak value of the first current corresponding to a reference count and a switching frequency of the main switch.
US07701731B2	Signal communication across an isolation barrier A method for transmitting an information signal across an isolation barrier comprises receiving an input signal, preconditioning the input signal according to a modulation function, passing the preconditioned signal through the isolation barrier, and recovering the passed signal according to a demodulation function corresponding to the modulation function, the recovered signal being operative as a feedback signal.
US07701728B2	Electronic component module and radio comunications equipment An IC element 2 having an oscillation circuit and an amplification circuit is mounted on a wiring board 1, the IC element 2 is covered with a sealing resin layer 4 having a window 4a on an upper surface of the IC element 2, and a shielding layer 5 is made to adhere to the sealing resin layer 4 and the window 4a from above. In a simple configuration, the entrance of electromagnetic waves into the IC element 2 is reduced, which allows a transmission signal from the IC element 2 to be stabilized.
US07701726B2	Method of manufacturing a wiring substrate and semiconductor device A wiring substrate includes a base insulating film, a first interconnection formed on a top surface side of the base insulating film, a via conductor provided in a via hole formed in the base insulating film, and a second interconnection provided on a bottom surface side of the base insulating film, the second interconnection being connected to the first interconnection via the via conductor. The wiring substrate includes divided-substrate-unit regions, in each of which the first interconnection, the via conductor, and the second interconnection are formed.
US07701725B2	Computer system with riser card A computer system includes a chassis (10) having a bottom plate (12), a drive bracket (20) for securing at least one data storage device therein, a motherboard (40), and a riser card (30). The drive bracket is secured in the chassis above the bottom plate, and has a sidewall (203) perpendicular to the bottom plate of the chassis. The motherboard is secured on the bottom plate of the chassis forming a socket (41) thereon. The riser card electrically engages in the socket of the motherboard, and is secured on the sidewall of the drive bracket.
US07701721B2	Easily disassembling cooling apparatus An easily disassembling cooling apparatus is assembled onto a circuit board. The circuit board has an electronic element. The cooling apparatus includes a pair of fastening blocks, one or two heat conducting blocks, a heat pipe, a fastening plate, and a plurality of locking elements. The fastening blocks are fastened onto the circuit board and each has a track slot. The heat conducting block is installed between the fastening blocks and contacts the electronic element. One end of the heat pipe is installed with the heat conducting block. The fastening plate is installed in the track slots of the fastening blocks, and has a flexible arm that flexibly presses onto the heat pipe. Each of the locking elements respectively is combined with the fastening block. Thereby, the welding process is not required in the assembling process. The electronic element is reliably cooled, and the assembling time is reduced.
US07701719B2	Fastening device for thermal module A thermal module includes a heat sink (20), a heat pipe (10) and a fastening device (100). The heat pipe has a condenser section (14) connected with the heat sink. The fastening device includes a base member (50) for fixing an evaporator section of the heat pipe, a positioning pole (58) disposed on and connected to the base member, and an elastic member (30). The positioning pole includes a neck (580) and a head (582). The elastic member includes an abutting portion (32) defining therein a positioning hole (320), and two locking portions (34) extending from the abutting portion. The neck of the positioning pole is freely and loosely received in the positioning hole of the abutting portion. A maximal outer diameter of the head of the positioning pole exceeds a diameter of the fixing hole.
US07701716B2	Heat-transfer mechanism including a liquid-metal thermal coupling Embodiments of a heat-transfer mechanism are described. This heat-transfer mechanism includes a first heatpipe having a first end and a second end, and a second heatpipe having a third end and a fourth end. Moreover, a heatpipe coupler is thermally coupled to the second end of the first heatpipe and the third end of the second heatpipe. This heatpipe coupler includes a housing surrounding a cavity and a liquid metal contained within the cavity, thereby providing a thermal path from the first end of the first heatpipe, which is configured to couple to a condenser, to the fourth end of the second heatpipe, which is configured to couple to an evaporator.
US07701709B2	Electronic apparatus According to one embodiment, a housing of an electronic apparatus includes a first sidewall portion provided with an air vent, a ceiling wall portion extending from an upper end of the first sidewall portion toward the outside of the housing, and a pair of second sidewall portions which extend from respective side end portions of the first sidewall portion toward the outside of the housing and are opposed to each other.
US07701703B2	Fixing apparatus for hard disk drive An exemplary fixing apparatus is for mounting a hard disk drive (HDD) having a plurality of holes defined in sidewalls thereof. The fixing apparatus includes a first bracket, and a second bracket. The first bracket includes a side plate, and a transverse member perpendicular to the side plate. The second bracket includes a side plate, and a transverse member perpendicular to the side plate. A free end of the transverse member of the second bracket pivotably engages with the transverse member of the first bracket. A free end of the transverse member of the first bracket is detachably locked to the transverse member of the second bracket. The side plates of the first bracket and the second bracket include a plurality of fixing members attached thereto to engage in the holes of the disk drive, respectively.
US07701701B2	Computer system and control method thereof A computer system has an internal mounting unit in which a device supporting a predetermined interface is mounted. The computer system includes an external mounting unit supporting the interface; a device controller comprising a plurality of communication channels, which can communicate with the device, for communicating with the device mounted in the internal mounting unit through a first communication channel of the plurality of communication channels and communicating with an external apparatus mounted in the external mounting unit through a second communication channel of the plurality of communication channels; and a switching controller for selectively connecting the external apparatus mounted in the external mounting unit to one of the second communication channel of the device controller and the device mounted in the internal mounting unit according to power-on/off of the system.
US07701695B2	Ultra low inductance multi layer ceramic capacitor A capacitor comprises m electrode plates that are arranged spaced apart and in parallel, where m is an integer greater than one. Even ones of the m electrode plates comprise x extensions that extend from the first side and that have a first width. Odd ones of the m electrode plates comprise y extensions that extend from the first side and that have a second width that is less than the first width. The x extensions are located between the y extensions when the m electrode plates are arranged in parallel. n first external terminals that are arranged on a first exterior surface of the capacitor. The x extensions are coupled to x of the n first external terminals and wherein the y extensions of the odd ones of the m electrode plates are coupled to y of the n first external terminals.
US07701693B2	Electrostatic chuck with heater and manufacturing method thereof An electrostatic chuck includes a base. The base has a support portion made of alumina ceramics, and a surface portion made of yttria ceramics. The surface portion forms at least a substrate mounting surface and side surface of the base on a surface of the support portion. Carbon contents in alumina ceramics of the support portion and yttria ceramics of the surface portion are 0.05 wt % or less.
US07701691B2	Control device for driving AC solenoids and DC bistable solenoids, specifically for electrovalves of irrigation systems There is described a control device that allows to drive both AC solenoids and DC bistable solenoids. The control device comprises power supply terminals which may selectively be connected to an AC or DC voltage source, load terminals which may be connected to a driven solenoid, at least one triac device connected in series to said driven solenoid, means which may be controlled to switch on said triac. There are further provided selector means interposed between said power supply terminals and said load terminals to switch the control device between a first configuration suitable for the power supply of an AC solenoid and a second configuration suitable for the power supply of a DC bistable solenoid and inverter means which may be controlled to invert the voltage polarity at the load terminals with respect to that applied at the power supply terminals when the control device (1) is selected in said second configuration.
US07701689B1	Protector block assembly for providing surge protection in telecommunication systems A protector block assembly interfaces a plurality of subscriber lines to communication equipment, such as digital subscriber line (DSL) modems. The assembly has a protector block into which surge protection modules are plugged. Each surge protection module limits the current that may pass from a respective subscriber line to communication equipment protected by the assembly. When plugged into the protector block, the surge protection modules are oriented such that crosstalk interference from the protector block is canceled thereby reducing the amount of crosstalk introduced by the protector block.
US07701677B2	Inductive quench for magnet protection A coil system for inductively heating a superconducting magnet in order to provide an internal energy dump by uniformly quenching a high performance superconducting magnet. The quench-inducing system uses AC magnetic fields that require negligible reactive power. The system is especially suited for inducing a relatively uniform quench in dry superconducting magnets.
US07701676B2	Flying head slider and recording medium drive A flying head slider includes a write head element and a read head element mounted on the slider body. A first transformable actuator serves to protrude the write head element toward a recording medium. A second transformable actuator serves to protrude the read head element toward the recording medium. The first and second transformable actuators can separately be controlled. The amount of protrusion can thus be individually controlled for the write head element and the read head element. The flying height can individually be set above the surface of the recording medium for the write head element and the read head element. Such an adjustment of the flying height enables the write head element and the read head element to simultaneously get closest to the recording medium.
US07701672B2	Suspension with locally stiffened load beam A loadbeam is locally stiffened by either, 1. the addition of strategically placed extra material to the loadbeam, 2. not removing material during the etching process to form the loadbeam, or 3. special forming, by crimping or bending, at specific sites on the beam. The use of local stiffening, when placed about the loadbeam dimple or between the dimple and flexure attachment points, with or without additional damping, can significantly improve the dynamical response of the loadbeam and eliminate vibrational modes of a slider mounted on the loadbeam during HDI interactions with disk surface asperities during disk drive operation.
US07701670B2	Head slider capable of being reliably released from effect of moving recording medium A medium-opposed surface of a slider body is hemisected into first and second areas by the centerline extending in the longitudinal direction of the slider body. The second area is designed to generate a positive pressure larger than that generated at the first area when a load acting on the slider body in a direction toward a recording medium decreases. The head slider of the type is allowed to enjoy the imbalance of the lift on the slider body. This imbalance can be utilized to intentionally induce increases in the roll angle and the pitch angle of the slider body. The increase in the roll and pitch angles causes disappearance of the lift and the negative pressure generated at the medium-opposed surface. The head slider can reliably be distanced from the moving surface of the recording medium solely with the assistance of the airflow acting on the medium-opposed surface.
US07701664B2	Mounting spindle shaft in magnetic disk drive A magnetic disk drive has a problem in that when a shock in excess of a force used to fasten a spindle shaft to a cover is applied, the spindle shaft becomes inclined. Embodiments of the invention overcome this problem. In one embodiment, a cover is formed with a recessed portion at a location opposite to a spindle shaft. The recessed portion is formed with a projection having an end to be in contact with an inclined portion of a tapped hole of the spindle shaft. Thus, a “plug-like” structure is formed. Preferably, a gap between the cover and the spindle shaft is not present. With this structure, even if the shock is applied from outside, the projection of the cover acts as a stopper to suppress a displacement between the spindle shaft and the cover, thus preventing inclination of the spindle shaft.
US07701662B2	Cartridge reel lock release sensing systems and methods A tape drive having a reel release sensing procedure and system is provided. In one example, the tape drive includes a motor coupled to a reel driver for driving a reel of a storage device, a sensor for detecting movement associated with the reel driver, and a controller. The controller operates to activate the motor to rotate the reel driver prior to coupling the tape to a drive leader. The controller further determines if the reel driver moved in response to activating the motor based on a signal from the sensor, and causes the tape to be loaded into the drive if the reel moved (or moved more than a predetermined amount/distance). For example, the controller may determine the reel is released if the reel driver moved in response to activating the motor and is not released otherwise.
US07701657B2	High-density recording method for hard disk drives and a pre-amplifier circuit suitable for use with same A magnetic recording method is provided where ternary data is recorded on a magnetic recording medium by forming a first area that corresponds to a first value of the data and in which a first magnetization state is continued at least during the minimum write width. A second area that corresponds to a second value of the data in which a second magnetization state is oppositely magnetized as compared with the first magnetization state is continued at least during the minimum write width. A third area that corresponds to a third value of the data in which the magnetic intensity detected by the read head corresponds to a “0.” Accordingly, the ternary data can be recorded using the characteristic that a signal having a width narrower than the detection width of the read head is not detected by the read head.
US07701651B2	Lens module structure with a metal shell and assembling method therefor A lens module structure with a metal shell includes a metal shell and a lens module. The metal shell has a bottom casing and a top casing. The bottom casing has several lateral plates which have protrusions inwardly. At least two lateral plates have first locking portions. Second locking portions corresponding to the first locking portions are disposed on the side wall of the top casing. The lens module has metal portions and is assembled with the bottom casing. Each of the protrusions on the bottom casing abuts and holds the metal portions. Furthermore, the top casing is assembled with the bottom casing via locking the second locking portions with the first locking portions. The protrusions have a predetermined length. The protrusions can abut and hold the lens module with a predetermined size. Moreover, the effect of anti-electromagnetic interference is improved.
US07701640B2	Projection optical system and method for photolithography and exposure apparatus and method using same An immersion optical system includes a plurality of lenses disposed along a light beam path of the immersion optical system. The plurality of lenses include a liquid immerged lens which is contactable with a liquid layer. An optically conjugate point of an object surface is formed in the light beam path of the immersion optical system. The object surface is contactable with a liquid.
US07701639B2	Projection type image display apparatus A projection-type display apparatus, comprises a front lens group having a plural number of lenses, each having rotationally symmetric surface configuration, a rear lens group, being disposed in rear of the front lens group, including a refractive lens for diverting a light and having a rotationally symmetric surface configuration, and a plural number of free curved surface lenses, each having a rotationally asymmetric free curved surface configuration, and a reflection mirror, being disposed in rear of the rear lens group, having a convex configuration into a direction of reflection of light and a rotationally asymmetric free curved surface configuration, at least in a part thereof.
US07701638B2	Spherically shaped optical beamsplitter A rotatable optical beamsplitter comprises an optically-transparent material and a partially-reflective layer. The optically-transparent material has a unitary spherical exterior surface. The partially-reflective layer is located at least partially within the optically transparent material. The spherically shaped optical beamsplitter demonstrates reduced optical distortion.
US07701636B2	Gradient index microlenses and method of formation A lens includes a gradient index of refraction and a curved shape. A method of making the lens includes forming a plurality of layers, forming a shaped resist on the plurality of layers, and etching the resist and the plurality of layers to transfer the shape of the resist into the plurality of layers.
US07701634B2	Light-guiding surface structure The present invention relates to a multilayer, surface structured solid plate for light guidance, the base material of which consists of a transparent plastic material, and optionally one or more cover layers.
US07701619B2	Scanning module A scanning module is used in a scanner with a glass for placing documents. The scanning module contains a convergent lens set comprised of lenses with different curvatures and a long-stripe shape lined up from a reflector, and starting with the reflector, the lengths of the lenses are shorter and shorter one by one. All the light reflected by the document can be converged by the convergent lens set to an image sensor so that an optimal image completely falls in the image sensor. The convergent lens set shortens the length of the scanning module, rendering a compact scanner.
US07701617B2	Printing methods and apparatus for providing printed forms A representative embodiment provides for a document printing apparatus having a print engine a print engine configured to print sheet media, and an output tray configured to receive printed sheet media from the print engine. The printing apparatus further includes a memory device, a processor, and a sheet media detector. The sheet media detector is configured to determine a predetermined quantity of sheet media in the output tray and to generate a signal in response thereto. The memory device is configured to store a document therein in electronic form. The processor is configured to receive the signal from the sheet media detector, and, in response, to cause the print engine to print the document and to place the document in the output tray.
US07701616B2	Systems, methods, and user-interfaces for secure document scanning Systems, methods, and user-interfaces consistent with embodiments of the present invention provide for a method for secure document scanning in a non-private environment. In some methods for secure document scanning in a non-private environment, the presence of an accessible and writeable removable media device coupled to a scanning device may be detected and the user may be presented with interfaces to configure parameters related to the scan, including scanning device related parameters, document related parameters, and removable media device related parameters. The scanned document may be saved to the removable media device if it meets criteria specified by the user, which may include verification and authentication of security mechanisms embedded in the document.
US07701613B2	Image forming apparatus with random number generator In an image forming apparatus which expresses lamp lighting energy corresponding to input gray scale data on the basis of on/off of lighting lamp of plural sub-dots corresponding to different lamp lighting times of different assistant scanning positions, with respect to such image that rapidly changes from a state close to white level toward a state close to black level, or with respect to such image that rapidly changes from a state close to black level toward a state close to white level, in order to decrease that a thin white stripe or a thin black stripe happens on the border portion, a random generator 34 and a adding circuit 33 are provided so that: whenever the gray scale value is inputted to the gray scale value input register 31, with respect to the lamp lighting energy, a random number of predetermined level is added.
US07701602B2	Mobile device-based printing system and method A mobile device-based printing system and method is described. The printer system for network printing includes a communication network adapted to transfer messages between a mobile device and a printer. The printer is connectable to the communication network to receive a print message, including a reference to a document to be printed, via the communication network. The printer has a phone number for receiving print messages via said communication network. The mobile device is connectable to the communication network to transmit the print message on the communication network. A method for printing from a mobile device to a printer using a communication network includes transmitting a print message to a phone number of the printer from the mobile device where the print message includes a reference to a document to be printed.
US07701599B2	Setting error avoidable printing system and method A printing system includes a document supervisory client provided in a first computer and configured to generating at least one print condition setting. A document supervisory server provided in a second computer and configured to perform printing based on the print condition settings. The document supervisory client queries the document supervisory server via a network if the print condition settings are appropriate in a printer controlled by the document supervisory server through the network. The document supervisory server returns advisability of the print condition settings to the document supervisory client based on a condition of the printer.
US07701590B2	Apparatus, methods, devices, and systems in which differences and/or changes in photosensed positions and/or quantities relate to shifts and/or differences in photon energies Response to light with laterally varying photon energy distribution is based on position, such as position on a detector of a respective light spot or intensity maximum for a wavelength or photon energy subrange. A layered structure such as a coating over the detector can produce the laterally varying distribution, such as due to a laterally varying transmission property. A differential output or quantity can be obtained using sensing results from the detector and can then be used to monitor a light source's wavelength. The light source can, for example, be a pulsed or continuous laser, in which case an optical component between the light source and the detector can be structured to prevent inhomogeneities such as speckle and also reflection back to the laser that could cause feedback. A tunable light source can be tuned in response to positions at which its light is detected.
US07701589B2	Three-dimensional shape measuring method and apparatus Three-dimensional shape measuring instrument (white interferometer) for measuring the three-dimensional shape of an object to be measured by using white interference fringes, which detects the position where the amplitude of the white interference fringes takes on a maximum value with high accuracy in a short calculation processing time. An envelope distribution of the amplitude of the white interference fringes produced by the interference between the returning light from a reference mirror (6) and the returning light from an object (7) to be measured is determined, and an approximate position where the contrast of the white interference fringes is the highest is determined using this envelope distribution. The interference fringes of two or more different spectrum band components included in the white interference fringes are extracted, and the positions which are near the determined approximate position and at which the phases of the interference fringes of the different spectrum band components take on the same values are determined.
US07701582B2	Method and device for carrying out surface plasmon resonance measurement A method and a device for carrying out surface plasmon resonance measurement. A beam of electromagnetic radiation is produced by a source of electromagnetic radiation. The beam of electromagnetic radiation is directed through a prism onto a material layer in an angle of incidence, which material layer covers a planar surface of the prism. A resonance phenomenon is caused. A beam of reflected electromagnetic radiation is produced and directed by the surface to a detector for detecting the level of intensity of the beam of reflected electromagnetic radiation. The change of intensity of the beam of reflected electromagnetic radiation, caused by the surface resonance phenomenon, is measured. The beam of reflected electromagnetic radiation is reflected with a mirror to the detector.
US07701578B1	Planar micro-discharge gas detector A micro-sized gas detecting device with two electrodes separated by a gap of width ranging from 1 to 500 microns, where the detection is based on emission spectroscopy of gases in an electric discharge across the gap (discharge region) as the gas flows through the region. The characteristic light emitted by molecules during the discharge can be detected directly with photodiodes or transferred through optical fiber and detected with remote optical sensing components. The device can have single or multiple discharge regions in an array so that light emitted can be monitored at different wavelengths simultaneously. The device can operate under gaseous pressure ranging from a few milli-Torr to a few atmospheres. The device consumes little power (50 mW-100 mW) and can be powered with an alternating current and has the potential to be battery powered.
US07701571B2	Raman spectrometry assembly A Raman spectrometry assembly includes a Raman spectrometer having a laser light source and a Raman signal analyzer, an interface module comprising a housing which is connectable to and disconnectable from the spectrometer, and a fiber optic assembly which is connectable to and disconnectable from the interface module, the fiber optic assembly including optical fibers and a probe head at a distal end thereof for disposition adjacent a specimen to be tested, the optical fibers extending from the probe head and adapted to extend to the interface module.
US07701546B2	Method and apparatus for manufacturing an LCD A method of manufacturing an LCD comprising, preparing a liquid crystal panel which comprises a substrate assembly and a polarizing plate, wherein the polarizing plate is attached to the substrate assembly, disposing a gas injecting part towards the plate surface of the liquid crystal panel, while the gas injecting part is exposed to atmospheric conditions, and applying a pressure to the plate surface of the liquid crystal panel by injecting gas through the gas injecting part. With this configuration, the present invention provides a method to remove bubbles between the polarizing plate and liquid crystal panel without the use of a chamber.
US07701533B2	Electro-optical device and electronic apparatus An electro-optical device includes: a plurality of display pixels each of which has two Red sub-pixels, two Green sub-pixels, one Blue sub-pixel, and one transparent sub-pixel; and a colored layer which is partially formed on the Red, Green, and Blue sub-pixels. In the electro-optical device, uncolored portions are formed in parts of the Red and Green sub-pixels where the colored layer is not formed.
US07701530B2	Display device A display device including a case including a front case and a rear case, a main display panel and a sub display panel disposed inside the case, a protective member disposed on a front surface of the main display panel and protecting the main display panel, and a support frame disposed inside the case and supporting both the display panel and the protective member. The support frame includes a first support part contacting a lower surface of the main display panel and a second support part supporting a lower surface of the protective member.
US07701527B2	Display device A display device (200) includes a first frame (210), a backlight module (220), a display panel (230), and a second frame (240), in that order. A groove (211) is defined at one end of the first frame. The backlight module includes a light guide plate (221) and a light source device (222). The light guide plate includes a light incident surface (2211), a light emitting surface (2212) and a bottom surface (2213). The light source device is located at one end of the light incident surface of the light guide plate and received in the groove of the first frame. The display panel is located between the backlight module and the second frame. A locking portion (241) is formed at one end of the second frame. The locking portion is engaged with the groove. The first frame is engaged with the second frame.
US07701524B2	LCD device comprising the drain electrode connected to an upper and a side portion of the pixel electrode and fabrication method thereof A method for fabricating an LCD device includes providing a substrate; forming an active pattern having a source region, a drain region and a channel region on the substrate; forming a first insulation film on the substrate; forming a gate electrode, a gate line and a pixel electrode on the substrate; forming a second insulation film on the substrate; forming a contact hole exposing a portion of the source and drain regions by removing a portion of the first and second insulation films; patterning the second insulation film on the pixel electrode at least a size corresponding to a form of the pixel electrode; and forming a source electrode electrically connected to the source region and a drain electrode electrically connected to the drain region through the contact hole.
US07701523B2	Electro-optical device An electro-optical device comprising a display drive system with the display timing related to the unit time t for writing-in a picture element and to the time F for writing-in one picture is disclosed. In the device, a gradated display corresponding to the ratio of the division can be obtained by time-sharing the signal during a write-in of time t without changing the time F.
US07701521B2	Array substrate having particular storage capacitance structure for liquid crystal display device and method of manufacturing the same An array substrate for a liquid crystal display device includes a substrate including a first driving region, a second driving region, and a pixel region, the pixel region including a switching region and a storage region; a first n-type transistor in the first driving region, a second p-type transistor in the second driving region; a third transistor in the switching region, the third transistor including a gate electrode, an active layer, a source electrode, and a drain electrode; an extension portion in the storage region and extending from the active layer; a metal pattern on the extension portion; a storage line over the metal pattern; and a pixel electrode in the pixel region and contacting the third transistor, wherein the metal pattern, the storage line and the pixel electrode form first, second and third electrodes of a storage capacitor that includes a first capacitor and a second capacitor parallel to each other.
US07701520B2	Liquid crystal panel and display device with data bus lines and auxiliary capacitance bus lines both extending in the same direction In a TFT substrate partially constituting a liquid crystal panel, gate bus lines and data bus lines are provided in orthogonal directions to each other, and a switching element (TFT) is provided in the vicinity of each of intersecting points of these bus lines. Further, Cs bus lines forming auxiliary capacitances (Cs) together with picture element electrodes each of which is provided for each picture element are provided in the direction parallel to the data bus lines. The gate bus lines, the data bus lines, and the Cs bus lines are provided at equal wiring intervals, respectively, and picture element regions each having the shape of a square are delimited by the Cs bus lines as boundaries.
US07701510B2	Menu generation for MPEG complaint devices An on-screen display is generated for an MPEG compliant receiver. Externally of the MPEG compliant receiver, an MPEG transport stream is accessed, first data in the accessed MPEG transport stream is replaced with second data that relates to the data to be provided in the on-screen display, and the MPEG transport stream with the second data is remodulated as an RF signal. The RF signal is forwarded to the MPEG compliant receiver. The first data can be close caption data, and the second data can be installation and/or configuration menu data.
US07701501B2	Electronic imaging apparatus with anti-dust function An electronic imaging apparatus includes an imaging optical system which forms an optical image of an object. A photoelectric conversion element converts the optical image into an electric signal. The optical element is arranged between the imaging optical system and the photoelectric conversion element. An excitation unit vibrates the optical element at a set frequency, and vibrates the optical element at least in an imaging operation of the photoelectric conversion element.
US07701491B2	Image pickup device with zoom function When a continuous-zoom-photographing mode is selected, a through image of a subject and first and second continuous-zoom-photographing frames are produced on an image-display section. When a user operates a cross key, recorded information about a trimming position of each of the first and second continuous-zoom-photographing frames is updated according to the cross-key operation, and the first and second continuous-zoom-photographing frames are produced at the updated trimming position recorded after the update. When a shutter button is operated, still-image photographing is started and obtained image data is stored in a buffer memory. On the basis of the obtained image data, image data is generated for each of the first and second continuous-zoom-photographing frames through trimming processing and stored in the buffer memory. The obtained image data and the generated image data are stored in a flash memory.
US07701485B2	High resolution imaging apparatus with reduced data An imaging apparatus is disclosed which can increase recording resolution while reducing data amount handled during compression processing. The imaging apparatus includes a first imaging unit capturing an image of a subject and outputting a frame in first resolution in first time intervals, a second imaging unit capturing the image of the subject and outputting a frame in second resolution higher than the first resolution in second time intervals longer than the first time intervals, a detecting unit detecting motion vectors between the adjacent frames outputted from the first imaging unit and outputting the motion vectors as vector distribution information in the first resolution, a converting unit converting the vector distribution the in the first resolution into vector distribution information in the second resolution, and a recording unit recording on a storage media the vector distribution information in the second resolution and the frames outputted from the second imaging unit.
US07701478B2	Imaging head mount Various embodiments of an imaging head mount are disclosed.
US07701476B2	Four color arrangements of emitters for subpixel rendering Novel three-color and four-color subpixel arrangements and architectures for display and the like are herein disclosed. Novel techniques for subpixel rendering on the above subpixel arrangements are also herein disclosed.
US07701471B1	Methods and apparatus to display a viewing region An application initiates a display of a first portion of an image in a viewing region of a display screen. Additionally, the application initiates a transparent display of an overflow indicator in a display area of the viewing region to enable viewing through the overflow indicator to corresponding content associated with the image. As its name suggests, the overflow indicator indicates that there is a second portion of the image not currently displayed in the viewing region. This technique of providing the overflow indicator overlaid on the image enhances a user's viewing experience because a display area or region occupied by the overflow indicator (e.g., a shaded region) enables a user to i) view an unobstructed view of the image beneath the overflow indicator, and ii) identify that a current size of the viewing region only shows a portion of the image rather than the whole image.
US07701456B1	System and method for assisted awareness A data feed is monitored to determine whether a condition is satisfied. If the condition is satisfied, an alert is initiated to attract a user's attention. Thereafter, playback mode is entered causing the example system to playback a short period of time-compressed data that occurred just prior to the event occurring to set context for the user. Once the playback signal has caught up with the real-time data feed, the data is output at normal levels. Other configurations, which are described herein, are also possible.
US07701451B1	Boost look up table compression system and method An embodiment may include an apparatus comprising a controller for a display system, a first look up table containing data for the controller to operate the display system, and a second look up table with data that is offset from the first look up table data to preserve memory space in the controller. An embodiment may be a method comprising storing color data in a first look up table, storing color data in at least one offset look up table, the at least one offset look up table using offset values from the first look up table, and controlling a display with the first look up table and the at least one offset look up table.
US07701448B2	Liquid crystal display device achieving imaging with high S/N ratio using invisible light A liquid crystal panel brightness controller notifies a backlight controller that an illuminance of ambient light is equal to or less than a threshold value. Upon notification, the backlight controller causes invisible light emitted, for example. The invisible light passes through a liquid crystal panel and is reflected by an imaging target and is received by photosensors. Accordingly, the decrease in the amount of the visible light received by photosensors is compensated. As a result, an image with a high S/N ratio is obtained.
US07701444B2	Mouse having a changeable pad A mouse having a changeable pad is comprised of a case, at least one replacement board and a plurality of pads. The replacement board is installed in the bottom of the case. The pads are installed on both faces of the replacement board. When the pad on the first face of the replacement board becomes worn out, the replacement board can be turned over and the pad on the second face of the replacement board can be installed in the bottom of the case for increasing the pad's user life.
US07701438B2	Design of force sensations for haptic feedback computer interfaces A design interface tool for designing force sensations for use with a host computer and haptic feedback interface device. A haptic feedback device communicates with a host computer that displays the interface tool. The user selects and characterizes force sensations using the interface tool, and a graphical representation of the characterized force sensation is displayed. The characterized force sensation is output to a user manipulatable object of the force feedback device so that the user can feel the designed force sensation The user can include multiple force sensations in a compound force sensation, where the compound sensation is graphically displayed to indicate the relative start times and duration of each of the force sensations. The user can also associate a sound with the force sensation, such that the sound is output in conjunction with the output of the force sensation.
US07701435B2	Electrophoretic display, method for driving electrophoretic display, and storage display An electrophoretic display according to the present invention includes a first reset step for applying a first voltage to electrophoretic devices such that no image is displayed and no afterimages are present in the electrophoretic devices between a first step for displaying a first image on the electrophoretic devices and a second step for displaying a second image on the electrophoretic devices and a second reset step for applying a second voltage higher than the first voltage such that no image is displayed and no afterimage is present in the electrophoretic devices at a frequency less than that at which the first reset step is performed.
US07701432B2	Routing signals to drivers of display device with minimized wiring A display device includes a first set of data buses coupled between a timing controller and a first line driver. In addition, the display device also includes a second set of at least one data bus coupled between the first line driver and a second line driver. The second set has a less number of at least one data bus than the first set. Thus, data signals are transmitted to the line drivers of the display panel from the timing controller with minimized wiring for reduced power consumption and electromagnetic interference.
US07701428B2	Integrated displays using nanowire transistors The present invention is directed to a display using nanowire transistors. In particular, a liquid crystal display using nanowire pixel transistors, nanowire row transistors, nanowire column transistors and nanowire edge electronics is described. A nanowire pixel transistor is used to control the voltage applied across a pixel containing liquid crystals. A pair of nanowire row transistors is used to turn nanowire pixel transistors that are located along a row trace connected to the pair of nanowire row transistors on and off. Nanowire column transistors are used to apply a voltage across nanowire pixel transistors that are located along a column trace connected to a nanowire column transistor. Displays including organic light emitting diodes (OLED) displays, nanotube field effect displays, plasma displays, micromirror displays, micoelectromechanical (MEMs) displays, electrochromic displays and electrophoretic displays using nanowire transistors are also provided.
US07701427B2	Display panel module, display unit, inspection device for display panel and inspection method for display panel A display panel module, includes: a display panel having a light-transmitting section that can control a transmissive light amount; an illuminating device that can irradiate a light to the display panel; an illumination controller for controlling the drive of the illuminating device; a display panel controller for controlling the drive of the display panel; and a display mode controller that can control a normal display mode for displaying an image in accordance with image signals input from the outside and an inspection mode for inspecting the display panel. When the inspection mode is selected in the display mode controller, the display panel controller controls the drive of the display panel depending on inspection purposes. The illumination controller controls at least one of brightness, lighting timing and illumination color of the illuminating device depending on the inspection purposes.
US07701425B2	Display driver and electro-optical device A display driver including a shift register which shifts a shift start signal based on a shift clock to output a shift output from flip-flops thereof; a shift register control circuit which controls the shift register; a data latch which fetches display data on a display data bus, based on the shift output of the shift register; and a drive circuit which drives data lines based on the display data that has been fetched into the data latch. The shift register control circuit supplies the shift clock to the shift register in a vertical scan period, to cause the shift register to fetch display data for one horizontal scan, then halts the supply of the shift clock, and also supplies the shift clock to the shift register in a vertical blanking period, to clear the contents held in the shift register.
US07701423B2	Image display device and method An image display device and image display method are provided. The device and method can prevent changes in image density and contrast, which are caused by repeated displaying over long periods of time and changes in environment, by employing accurate electric current detection, due to the following operations. Voltage measurement is initiated with a detection circuit. Next, the application of drive voltage is initiated with a drive power source. An electric current value is calculated from the measured voltage value and the electric current value is temporarily stored. The electric current values are stored every set amount of time and the storage thereof accumulates. Application of the drive voltage is terminated and the integral value of the electric current is calculated in accordance with formulas.
US07701422B2	Active matrix display device The invention relates to an active matrix display device (6) comprising a display panel (2) with a matrix of display pixels (3), and row and column electrodes (11,12) coupled to the display pixels (3). Each of the display pixels (3) has a current mirror circuit adapted to receive a programming current (Iprog) via the column electrodes (11) and to reproduce the programming current (Iprog) for driving an emissive element (14). The display device (6) is further arranged to execute a calibration phase wherein a calibration voltage (Vcal) is applied at each column electrode (11) before the programming current (Iprog) is applied.
US07701406B1	Variable height/thickness ratio tapered slot antenna for matching impedance and power handling A Variable Height/Thickness Ratio Tapered Slot Antenna For Matching Impedance and Power Handling (NC#98542). The apparatus includes a tapered slot antenna having a gap height and a thickness. The tapered slot antenna includes a first antenna element comprising conductive material, configured to receive and transmit RF signals and a second antenna element comprising conductive material, operatively coupled to said first antenna element, configured to receive and transmit RF signals. A correlation between said gap height and said thickness can be represented by an equation.
US07701404B2	Method and apparatus for limiting VSWR spikes in a compact broadband meander line loaded antenna assembly A method of operating a higher conductivity broadband loaded meander line antenna (10) is provided wherein the meander line is positioned on a sheet of a lower conductivity material (22) having a conductivity of from about 0.01 siemens/m to about 0.10 siemens/m; and allowing a first electrical current to flow in a first current path in the meander line. An electrical field is formed in the vicinity of the lower conductivity material and a second current flows in a second current path in the lower conductivity material, whereby anti-resonance in the meander line loaded antenna is diminished so that a broadband response can be achieved over bandwidths of 5:1 or more. An assembly for carrying out this method is also disclosed.
US07701396B2	Wide-band fractal antenna An apparatus includes a discone antenna including a cone-shaped element whose physical shape is at least partially defined by at least one pleat.
US07701395B2	Increasing isolation between multiple antennas with a grounded meander line structure A wireless communication device includes multiple antennas spaced apart from each other. Also included is a dielectric substrate with electrically conductive ground areas along the substrate opposite the antennas. Signal coupling is decreased between the antennas by connecting the ground areas together with an isolation structure. In one nonlimiting form, this structure includes an electrically conductive meander line structure.
US07701382B2	Radar detection circuit for a WLAN transceiver A single chip radio transceiver includes circuitry that enables detection of radar signals to enable the radio transceiver to halt communications in overlapping communication bands to avoid interference with the radar transmitting the radar pulses. The radio transceiver is operable to evaluate a number of most and second most common pulse interval values to determine whether a traditional radar signal is present. The radio transceiver also is operable to FM demodulate an incoming signal to determine whether a non-traditional radar signal, such as a bin-5 radar signal, is present. After. FM demodulation, the signal is averaged wherein a substantially large value is produced for non-traditional radar signals and a value approximately equal to zero is produced for a communication signal that is not FM modulated with a continuously increasing frequency signal. Gain control is used to limit incoming signal magnitude to a specified range of magnitudes.
US07701381B2	System and method of orbital angular momentum (OAM) diverse signal processing using classical beams The present invention describes a system and method of OAM diverse signal processing using classical beams for applications in which OAM signal character is controlled such as optical tagging and applications in which OAM signal character is not controlled such as clutter mitigation and interference cancellation for target detection, identification etc. This is accomplished by transmitting a source beam having a prescribed state with one or more non-zero OAM components, reflecting the beam off a ‘tagged’ or ‘untagged’ target and receiving the return beam in the direct return path to measure the one or more OAM components to identify the target. OAM processing provides additional degrees of processing freedom to greatly enhance the processing capabilities to detect and identify both ‘tagged’ and ‘untagged’ targets.
US07701378B2	Method of validating a number in an electronic device and associated electronic device The present invention relates to a method of validating a number comprising a plurality of digits, the number having a maximum value, each digit being successively entered by a user during several stages. The method includes a test stage activated when the number of digits entered is equal to that of the maximum value minus a unit. This test consists in comparing the most significant digit entered with the most significant digit of the maximum value. The test validates the set of digits entered when the most significant digit entered is greater than the most significant digit of the maximum value. The invention also relates to a device capable of implementing the method.
US07701372B1	Apparatus and methods for safe-mode delta-sigma modulators A delta-sigma modulator includes two integrators. One of the two integrators is lossy. The lossy integrator may be a continuous-time integrator, or a discrete-time integrator. Use of the lossy integrator maintains stability of the delta-sigma converter over a relatively wide range of input signals.
US07701370B2	Current output circuit with bias control and method thereof A current output circuit with bias control and a method thereof are provided. The current output circuit includes a current mirror circuit comprising a first transistor and a second transistor having respectively two drains, and a control circuit coupled to the current mirror circuit. The control circuit receives drain voltages of the first transistor and the second transistor, and adjusts a respective gate bias of the first transistor and the second transistor according to a respective drain voltage thereof.
US07701365B2	Encoding device and method, composite device and method, and transmission system An encoding method encodes, with an encoding device, second data made up of a plurality of first data representing predetermined numerical values. The encoding method includes taking a significant digit having, of the numerical values represented by each of the first data, the greatest absolute value, as a maximum significant digit of the first data. The encoding method also includes outputting, with the encoding device, code indicating the maximum significant digit and code indicating whether or not the maximum significant digit has changed. The encoding method additionally includes outputting code indicating the absolute value of a numerical value represented by the first data. Further, the encoding method includes outputting code indicating the sign of a numerical value represented by the first data.
US07701364B1	User input authentication and identity protection A method and system for user authentication and identity theft protection. A typing typeprint is used to validate users for access to a computer system. The typeprint may also include a watermark, a timestamp, or voice stamp for further security. The method and system provide multi-modal biometric protection by supplementing keystroke-scan methods and systems with fingerprint, voice-scan, signature-scan and mouse-scan verification. The authentication program may be built into a keyboard.
US07701363B1	Vehicle tracking and monitoring system A vehicle monitoring and traffic enforcement system in which a wireless communication device is associated with motor vehicles. The device will transmit vehicle identification data which is relayed to a database which maintains current information concerning insurance law compliance, motor vehicle registration and licensing compliance, traffic citations and other information. If a violation or compliance failure is noted, this is transmitted to a law enforcement agency and a nearby law enforcement vehicle. A law enforcement officer may be required to pursue the vehicle depending on the violation and traffic conditions. The system uses GPS and GIS technology to provide law enforcement with a real time display which will not only show the vehicle being tracked but also a map of the area showing roads, traffic conditions and even the location of other law enforcement or emergency vehicles so that officials may make a safe and fast response to situations. In another embodiment, the device may be a device such as an RFID tag which can be scanned and interrogated by a law enforcement official and which may be used for traffic and also parking control.
US07701357B2	System and method for detecting distribution transformer overload A system, device, and method of detecting an overload condition of a distribution transformer that supplies power to one or more customer premises via a low voltage subnet is provided. In one embodiment, the method comprises determining the power output of the transformer; storing in a memory a threshold power value for the transformer; determining whether the power output exceeds the threshold power value; and, if the output power exceeds the threshold power value, providing a notification. Providing the notification may include wirelessly transmitting the notification and/or transmitting the notification over a medium voltage power line. The low voltage subnet may comprise a low voltage feeder that supplies power to a plurality of low voltage supply lines that extend to the customer premises in which case determining the output power may comprise measuring a voltage of the low voltage feeder and measuring a current traversing the low voltage feeder. The method may also comprise storing in the memory a plurality of threshold power values associated with a plurality of transformers, such as different models of transformers; receiving data of the power output of a multitude of transformers; and determining whether the power output of each of the multitude of transformers exceeds the threshold value associated with the transformer, which steps may be performed at a central computer system such as a power line server.
US07701354B2	Portable alarm transmitter for compliance monitoring A portable alarm transmitter for compliance monitoring detects whether a user is wearing the device. If not, a special alarm signal is sent to the monitoring service provider so that remedial actions can be taken. The alarm transmitter comprises a motion sensor, and an algorithm thereby for detecting whether the alarm device is being worn by the user. The alarm transmitter distinguish between non-compliance (e.g. user has taken off the alarm device) versus other “activities of daily living (ADL) that may appear to be non-compliance events (e.g. sleeping) by incorporating user stimulus and user response.
US07701345B2	Visual identification tag deactivation A device for deactivating an RFID portion on an identification tag and indicating that the RFID portion is deactivated. The present invention addresses current privacy concerns regarding potential use of RFID technology after the point of sale. The device for deactivating the RFID portion of an identification tag provides visual indication that the RFID portion is deactivated. The visual indication occurs without the use of additional equipment or electronics. The visual indication component of the present invention is easy to interpret, so that a viewer will be able to quickly determine whether the RFID portion of the identification tag has been deactivated.
US07701332B2	Remote device for a monitoring system Embodiments of the present invention relate to methods, devices, and systems to monitor activity. One system to monitor activity includes a remote device including a home/away sensor and a transmitter. The embodiment also includes a local interface that receives a wireless signal from the transmitter and a base station operably coupled to the local interface. The base station can include a receiver for receiving signals from a number of sensors and a logic component that institutes rules to determine whether to initiate an alert based on one or more activations of the home/away sensor.
US07701326B2	Tire information transmitter and tire information acquisition system using the transmitter A tire information transmitter measures ambient information in a tire cavity region including at least pressure to wirelessly transmit to outside the tire cavity region. The tire transmitter comprises: a sensor unit having a pressure sensor for measuring a pressure in the tire cavity region; a control unit for comparing a level of a pressure signal representing pressure measured by the sensor unit with a threshold value and for generating an operation signal indicating that the tire information transmitter is operating; and a transmitting unit for wirelessly transmitting the pressure signal or the operation signal. The control unit controls the transmitting of the transmitting unit and compares the level of the pressure signal with the threshold value continually after a supply of driving power is started, and has a comparing mode in which the transmitting unit transmits the operation signal at a first time interval, and a transmitting mode in which the transmitting unit transmits the pressure signal at a second time interval which is shorter than the first time interval. Further, the control unit irreversibly shifts from the comparing mode to the transmitting mode, once the level of the pressure signal exceeds the threshold value, as a result of the comparing.
US07701322B2	Surface-mounted over-current protection device A surface-mounted over-current protection device with positive temperature coefficient (PTC) behavior is disclosed. The surface-mounted over-current protection device comprises a first metal foil, a second metal foil corresponding to the first metal foil, a PTC material layer stacked between the first metal foil and the second metal foil, a first metal electrode, a first metal conductor electrically connecting the first metal foil to the first metal electrode, a second metal electrode corresponding to the first metal electrode, a second metal conductor electrically connecting the second metal foil to the second metal electrode, and at least one insulated layer to electrically insulate the first metal electrode from the second metal electrode. The surface-mounted over-current protection device, at 25° C., indicates that a hold current thereof divided by the product of a covered area thereof and the number of the conductive composite module is at least 0.16 A/mm2.
US07701316B2	Integrated magnetic device An integrated magnetic device disposed on a system circuit board is disclosed. The integrated magnetic device comprises a first magnetic device and a second magnetic device. The first magnetic device comprises a primary winding having at least a terminal; a secondary winding disposed corresponding to the primary winding, a magnetic core assembly assembled with the primary and secondary windings and partially covered by the primary and secondary windings, and a receiving chamber. The second magnetic device has a central through hole and a plurality of conductive ends. The second magnetic device is received in the receiving chamber of the first magnetic device and electrically connected to the system circuit board via the conductive ends, and the terminal of the primary winding of the first magnetic device pierces through the central through hole of the second magnetic device and electrically connects to the system circuit board.
US07701313B2	Case for circuit breaker with monolithic door In a case for a circuit breaker in which a terminal is simply replaceable or mountable according to a wiring method of the circuit breaker, the case comprises a case which accommodates components for breaking a circuit, a terminal block portion which provides a common platform for plural types of terminals, and a door engaged with the case in monolithic form so that it may be operable to a closed position for closing the case or an opened position for installing a selected terminal of the plural types of terminals.
US07701306B2	Error correction signal generating device and orthogonal modulator equipped with the error correction signal generating device An offset errors of a quadrature modulator is corrected. A device including a first correction signal output unit (50) for outputting a first correction signal based upon a local signal (phase: 0°) from a 180°-phase amplifier (27) or a phase shift local signal (phase: 180°) from a 180°-phase amplifier (23), a second correction signal output unit (60) for outputting a second correction signal based upon an orthogonal local signal (phase: 90°) from a 180°-phase amplifier (37) or an orthogonal phase shift local signal (phase: 270°) from a 180°-phase amplifier (33), and a correction signal output unit (70) for outputting a correction signal based upon the first and second correction signals, wherein a correction signal is further added to outputs from an I signal mixer (42) and a Q signal mixer (44) by an adder (46) resulting in correcting offset errors of the quadrature modulation.
US07701305B2	Frequency jittering control for varying the switching frequency of a power supply A frequency jittering circuit modulates a hysteretic band of an oscillator such that the clock generated by the oscillator has a jitter frequency, and thus a switching mode power supply operative on the clock will have a jittering switching frequency.
US07701303B2	Oscillator with Darlington nodes A voltage-controlled oscillator has a resonance tank core providing a voltage-dependent resonance frequency, switching units connected with the resonance tank core for changing output voltage levels of the oscillator with a frequency corresponding to the resonance frequency of the resonance tank core. At least two of the switching units have pairs of Darlington transistors which are connected via a Darlington node. Output terminals are used for outputting the output voltage levels.
US07701298B2	Frequency locking structure applied to phase-locked loops A frequency locking structure applied to phase-locked loops (PLL) utilizes a common factor to reduce the difference between an output signal of oscillation and an input signal of reference for the jitter reduction of the input signal of reference. Moreover, a count value of clock signal is an input of a greatest-common-factor calculator to acquire an adaptive value and a feedback adaptive value for the common factor of a divider. Such a frequency locking structure both prevents the PLL from being in error about outputting frequency and dynamically adjusts the common factors for different purposes.
US07701279B2	Driving circuit for an emitter-switching configuration An embodiment of the invention relates to a driving circuit for an emitter-switching configuration of transistors having at least one first and one second control terminal connected to the driving circuit to form a controlled emitter-switching device having in turn respective collector, source and gate terminals. Advantageously the driving circuit comprises at least one IGBT device inserted between the collector terminal and a first end of a capacitor, whose second end is connected to the first control terminal, the IGBT device having in turn a third control terminal connected, through a first resistive element, to the gate terminal, as well as a second resistive element inserted between the gate terminal and the second control terminal. Advantageously, the driving circuit further comprises an additional supply inserted between the first and second ends of the capacitor to ensure its correct biasing.
US07701276B2	Multi-phase negative delay pulse generator A multi-phase pulse generator provides an even number of pulse signals of same phase difference and pulse signals of higher frequency by applying a negative delay concept. The multi-phase pulse generator includes a first delay block with first unit blocks which have a first negative delay property respectively and of which an even number is ring-coupled; and a second delay block including second unit blocks which have a second negative delay property respectively and of which even number is ring-coupled. The number of the first unit block and the number of the second unit block are the same. A plurality of output nodes is formed based on one-to-one sharing between the first unit block and the second unit block having output signals of different level. Each output node outputs a pulse generated by racing the output signals of different level to each other which are provided from the first unit block and the second unit block connected to the each output node.
US07701271B1	High linearity charge pump method and apparatus A charge pump configured for use in a phase-locked loop includes positive and negative current sources, transistor switches, voltage nodes and one or more operational amplifiers, wherein the positive and negative current sources each includes an output node, the output nodes are respectively connected sequentially to the voltage nodes having substantially the same voltage, the transistor switches are configured to sequentially switch such that at all times there is one transistor switch connection, and the currents flows through the transistor switches into one of the voltage nodes. One of the voltage nodes is connected to the PLL filter and the transistor switches are connected to the PLL filter and are controlled by the phase error pulses. Two voltage nodes are possible. The second node provides feedback. The currents to the second node are supplied substantially simultaneously for the same amount of time.
US07701270B2	Structure for a high output resistance, wide swing charge pump Disclosed are design structures for current sink and source circuits, a charge pump, and a phase locked loop. The current sink and source circuits each have a current mirror that biases a transistor connected to an output node. These circuits each further have a two-stage feedback amplifier to sense the current mirror drain voltage and to control the transistor gate voltage in order to stabilize the current mirror drain voltage independent of output voltage at the output node. The amplifier also increases output resistance at the output node. This configuration allows for a wide operation voltage range and ensures good circuit performance under a very low power supply. A charge pump that incorporates these circuits generates highly matched charging and discharging currents. A PLL that incorporates this charge pump exhibits minimal bandwidth shifts and minimal locking speed and jitter performance degradation.
US07701268B2	Clock generation circuit In a second system that generates a clock signal that is synchronized with a first system, a control voltage value that controls the second oscillator such that the second system is synchronized with the first system is monitored according to the phase difference between a reference signal that is generated using the output of a first oscillator in the first system and the output of a second oscillator, whereby frequency fluctuation that occurs due to age deterioration of the first oscillator is detected.
US07701267B2	Semiconductor device including phase detector A semiconductor device including an edge synchronizer which outputs a synchronized strobe signal generated by synchronizing a transition time point of a strobe signal with clock edges of a main clock or a sub clock, a detector which outputs a phase determination signal indicating a phase difference between the main clock and the sub clock in response to the synchronized strobe signal, and a duty ratio corrector which adjusts a duty ratio of the main clock and the sub clock in response to the phase determination signal.
US07701266B2	Clock synchronization circuit and clock synchronization method A clock synchronization circuit and a clock synchronization method which generate an internal clock synchronized to an external clock is presented. The circuit and method include a clock enable control circuit generating a clock enable control signal controlled by a power supply voltage and a power-down signal. The circuit and method also include a clock generating circuit receiving an input clock which selectively generates an internal clock synchronized to an external clock using the input clock using the clock enable control signal. Whereupon, a locking failure can be prevented by performing a phase update operation selectively in accordance with whether the power supply voltage is varied or not in the power-down mode. Furthermore, current consumption can be reduced by controlling phase update time in accordance with a variable magnitude of the power supply voltage.
US07701264B2	Semiconductor output circuit To improve a depletion transistor provided between a control terminal of an output transistor and an output terminal coupled to a load not to enter a conductive state when the output transistor is in the conductive state. The output transistor is served as a source follower. Control voltages which controlling the conductive state/nonconductive state of the depletion transistor are supplied to both a control terminal (gate) and a substrate terminal (back gate) of the depletion transistor.
US07701252B1	Stacked die network-on-chip for FPGA A programmable device system includes one or more network-on-chip (NoC) die layers vertically connected to one or more programmable chip dice layers. The NoC die layer includes interconnects, a bus or non-blocking switches, and optionally memory blocks and direct memory access engines. The NoC die layer improves on-chip communications by providing fast and direct interconnection circuitry between various parts of the programmable chip die.
US07701247B1	Data buffering with readout latency for single-event upset tolerant operation Apparatus and method for outputting data from an integrated circuit having programmable logic for Single-Event Upset tolerant operation is described. Configuration memory associated with the programmable logic is read. Bits of the configuration memory read are error checked. Buffers are cycled to select one to load and another one to unload responsive to completion of each error checking cycle of the bits. For a cycle of the error checking, a first data portion is loaded into one buffer of the buffers for the cycle, it is verified whether the bits are valid for the cycle, and a second data portion is unloaded from another buffer of the buffers responsive to the bits being valid for the cycle.
US07701246B1	Programmable delay line compensated for process, voltage, and temperature A delay line compensated for process, voltage, and temperature variations, includes a delay locked loop (DLL) configured to delay a digital signal by the clock period of the digital signal, the DLL including a DLL delay line arranged as a plurality of cascaded sub-delay lines each sub-delay line providing one of a plurality of delay quanta in response to a digital control signal. A fractionating circuit is configured to generate a digital delay line control signal that is a fraction of the digital control signal. A digital delay line is arranged as a plurality of cascaded sub-delay lines each sub-delay line providing one of a plurality of delay quanta in response to the digital delay line control signal.
US07701234B2	Inspection contact structure and probe card In the present invention, an inspection contact structure is attached to the lower surface side of a circuit board in a probe card. In the inspection contact structure, elastic sheets with protruding conductive portions are respectively attached to both surfaces of a silicone substrate. The silicone substrate is formed with current-carrying paths passing therethrough in the vertical direction, and the sheet conductive portions are in contact with the current-carrying paths from above and below. The conductive portions on the upper side are in contact with connecting terminals of the circuit board. At the time of inspection of electric properties of a wafer, electrode pads on the wafer are pressed against the conductive portions on the lower side and thereby brought into contact with them.
US07701231B2	Apparatus, system, and method for detecting cracking within an aftertreatment device An apparatus, system, and method are disclosed for detecting cracking in a particulate filter. The method may include providing an apparatus comprising an aftertreatment device with a substrate and a substrate surface, a conductive material forming a conduction path bonded to the surface of the substrate surface, and access points configured to allow a resistance measurement of the conduction path. The method may include measuring the resistance of the conduction path, and determining if one or more cracks have occurred on the substrate surface based on the resistance measurement. The method may further include labeling the degradation level of the aftertreatment device based on the indicated amount of cracking, and replacing the aftertreatment device with an equivalent aftertreatment device, based on the degradation level, after a service event.
US07701229B2	Methods and systems for measurement of fluid electrical stability The invention relates particularly to methods and apparatuses for characterizing water-in-oil or invert emulsion fluids for use in drilling well bores in hydro-carbon bearing subterranean formations. A fluid stability measurement device is disclosed. The device comprises a reference electrode and a second electrode coupled to an insulating body. A guard electrode is placed in the path between the reference electrode and the second electrode on the surface of the insulating body.
US07701224B2	Wire abnormality detecting device A sensor switch 111a connected to a constant voltage Vc via a breeder resistor 114a and dropper diodes 112a and 113a is connected to a microprocessor 120 that configures a wire abnormality detecting device 100, and the electric potential of the connection point between the dropper diodes 112a and 113a is inputted to the microprocessor 120 as a switch logic signal D1 via a signal wire 105 and a series resistor 131a. The signal voltage level of the switch logic signal D1 is inputted to the microprocessor 120 via an AD converter 123, and the microprocessor 120 cooperates with a program memory 121 to perform a determination of whether or not the signal voltage is in an abnormal intermediate voltage state. However, during a transitional period when the switch logic signal is changing between high and low, mistaken determination is prevented by avoiding abnormality determination.
US07701222B2	Method for validating printed circuit board materials for high speed applications A method for testing a printed circuit board to determining the dielectric loss associated with the circuit board material relative to a standard. Dielectric losses in the material generate heat when a high frequency electronic signal, such as a microwave frequency signal, is communicated through a microstrip that is embedded within the printed circuit board. The temperature or spectrum at the surface of printed circuit board is measured and compared against the temperature or spectrum of the standard to determine whether the material under test is acceptable. While various temperature measurement devices may be used, the temperature is preferably measured without contacting the surface, such as using an infrared radiation probe.
US07701218B2	Magnet assembly A magnet assembly for use in carrying out nuclear magnetic resonance experiments on a body or sample. The assembly comprises a set of superconducting coils within a cryostat, located about a bore, and arranged to generate a substantially uniform magnetic field in a primary working volume within the bore, and to generate a substantially uniform magnetic field in a secondary working volume within the coil structure and separate from the bore. At least part of a hyperpolarisation system intersects the at least one secondary working volume so as to hold a sample to be hyperpolarised in the secondary working volume.
US07701209B1	Coils for horizontal field magnetic resonance imaging Apparatus for performing magnetic resonance imaging are disclosed. In one aspect coil antennas for use with a horizontal field magnetic resonance imaging apparatus are placed in proximity to the scanning region to obtain magnetic resonance images. The coils are arranged in quadrature geometry and housed in a planar structure.
US07701208B2	Magnetic sensor circuit and portable terminal provided with such magnetic sensor circuit A Hall element outputs a Hall voltage generated at a first terminal pair or a second terminal pair to first and second output terminals by switching the voltage in a first status and a second status. Based on the voltages of the first and the second output terminals and a reference voltage, first and second capacitors are charged. Then, the voltages of the first and the second capacitors are compared, and a detection signal is obtained. Thus, a magnetic sensor circuit which reduces influence of an element offset voltage of the Hall element and also reduces influence of an input offset voltage generated at an amplifier, and a portable terminal provided with such magnetic sensor circuit are provided.
US07701207B2	Sensor, in particular a magnetic field sensor, with interference compensation and method for interference compensation of a sensor A sensor, in particular a Hall sensor, comprising a sensor element (1; 10) which outputs a sensor signal (SS) containing an interference signal (STS). An evaluation device (6; 20) is connected to the sensor element and contains a subtractor (2; 21) which subtracts the interference signal from the sensor signal. The sensor contains a filter device (3), which filters out the interference signal from the sensor signal. The sensor and a related method enable compensation of the interference signal.
US07701203B2	Method of sensing a position of a movable component of an operator interface in a machine A method of sensing a position of a movable component of an operator interface includes a step of receiving a first signal from a first Hall effect sensor and a second signal from a second Hall effect sensor. The method also includes a step of determining the position of the movable component based on the first signal and the second signal if the first and second signals represent expected values. The method includes a further step of determining the position of the movable component based on one of the first and second signals if the other of the first and second signals represents an unexpected value.
US07701201B2	Inductive switch The invention relates to an inductive sensor unit having one or several coils, which are mounted on a printed circuit board in a planar manner. According to the invention, a change in the inductance of a sensor coil due to leakage currents in the inductive actuator is correlated with the position of the actuator in two respects i.e., with the distance x to the sensor coils and with the overlapping y of the sensor coils. As a result, an inductive push button switch and an inductive position switching device (a sliding switch) are provided. The invention also relates to the evaluation of the inductance by means of reactance measurement. A relative evaluation of the influence of adjacent sensor coils increases the precision of response in push button switches and, generally, a relative evaluation of the influence of adjacent sensor coils is carried out in position switching devices.
US07701198B2	Power measurement apparatus A power measurement apparatus includes a radio frequency input terminal, a measurement module, an interface, a memory, and a control unit. The radio frequency input terminal is connected to a radio frequency device. The measurement module is connected to the radio frequency input terminal to convert the radio frequency signal into a voltage signal. The interface is connected to the measurement module, receiving and transmitting the voltage signal from the measurement module. The memory is connected to the interface to store a voltage-power table related to the radio frequency signal. The control unit is connected to the interface to query the voltage-power table in the memory via the interface, and obtain the power of the radio frequency device according to the voltage signal output from the measurement module.
US07701196B2	Methods for detecting and classifying loads on AC lines Methods for detecting and classifying loads on alternating current (AC) lines are provided. One such method includes the steps of placing an AC field sensor in AC electric and magnetic fields generated by an AC line, generating an electric field signal representative of the AC electric field received by the AC field sensor, generating a magnetic field signal representative of the AC magnetic field received by the AC field sensor, generating a relative phase signal representative of relative phase changes between the electric and magnetic fields, and processing the relative phase signal to detect and classify loads on the AC line. In another method, relative load vector signals representative of relative magnitude and phase changes in the magnetic field are generated and processed to detect and classify loads on the AC line.
US07701191B2	Method for the detection of objects enclosed in a medium, and measuring apparatus for carrying out said method The invention relates to a method for detecting objects (12) that are enclosed in a medium (10). According to said method, a test signal (18) that makes it possible to obtain information about the position of the enclosed object (12) is generated via at least one transmission coil (14) and at least one receiving conductor loop system (16) which are inductively coupled to each other. The frequency (fM) of the test signal (UM) is modified in accordance with the signal intensity of the detected test signal (18). The invention further relates to a measuring apparatus, especially a hand-held locating device (24, 124), for carrying out the disclosed method.
US07701188B2	Synchronous rectification switching regulator, and control circuit and control method therefor A synchronous rectification switching regulator, and a control circuit and a control method for controlling the synchronous rectification switching regulator. The regulator includes an output terminal, a first switching device, an inductor, a second switching device for synchronous rectification, a control circuit unit to control switching of the first switching device and cause the second switching device to perform switching opposite to that of the first switching device, and a reverse current detection circuit unit to detect a generation or an indication of a reverse current flowing from the output terminal to the second switching device and make the control circuit unit turn off the second switching device when a generation or an indication of the reverse current is detected. The reverse current detection circuit unit stops detecting a generation or an indication of the reverse current while the second switching device is turned off by the control circuit unit.
US07701184B2	Voltage protection circuit for thin oxide transistors, and memory device and processor-based system using same Devices, reference voltage generators, systems and methods are disclosed, including an embodiment of a voltage regulator output transistor using a thin gate insulator to provide a low output impedance despite having a semiconductor channel width that is relatively small. The output transistor is protected from damage by a clamping circuit provided to limit the gate-to-source voltage of the transistor such that damage to the output transistor should be reduced or prevented. One such clamping circuit includes a clamp transistor that receives a reference voltage at its gate. The magnitude of the reference voltage limits to voltage to which the gate of the transistor can be driven. A voltage reference circuit provides the reference voltage so that it compensates for process and temperature variations of the output transistor.
US07701175B2	Method for detecting acid stratification in a battery A method for detecting acid stratification in a battery includes the following steps: determining a first state of charge value during a load period of the battery on the basis of an estimated open-circuit voltage, determining a second state of charge value during a rest period of the battery following the load period on the basis of a measured open-circuit voltage, comparing the first state of charge value to the second state of charge value, and detecting acid stratification when a defined deviation of the first state of charge value from the second state of charge value is exceeded.
US07701169B2	Lithium secondary battery having internal protection circuit The present invention relates to a lithium secondary battery with a built-in protective circuit, which includes battery case (1), a battery core (2) and electrolyte. According to the present invention, a built-in protective circuit module (4) is provided to act as the connection between terminals of positive and negative electrodes (21 and 22) and output ends of positive and negative electrodes (31 and 32) inside the battery. The battery of the present invention has the advantages of safe and reliable protection against short-circuit, over-charge, over-discharge and over-current in the application, and therefore it is reliable power supply for the portable electronic appliances such as mobile phones and the like.
US07701165B2	Induction motor controller An induction motor controller that may include three phase paths leading from a power input to a power output, a solid-state switching device interposed between the power input and the power output on each of the three phase paths, a voltage sensor coupled to two of the phase paths between the solid-state switching device and the power output, a current sensor on one of the phase paths, a processor communicatively coupled to the voltage sensor, the current sensor, and the solid state switching device; and a memory coupled to the processor. The processor may be configured to calculate a motor parameter based on a signal from the voltage sensor and a signal from the current sensor and store the calculated motor parameter in memory.
US07701161B2	Motor balanced active user interface assembly An active user interface assembly includes a user interface, and one or more feedback motors coupled to the user interface. The one or more feedback motors, when energized, supply a feedback force to the user interface that opposes user interface movement. One of the feedback motors is disposed such that its center of gravity is located at a position relative to the user interface to mass balance the user interface when it is in the null position. The configurations allow for the center of gravity of a feedback motor to be positioned in a manner that alleviates the need for counterbalance weights.
US07701159B2	Brushless motor system A brushless motor system which can suppress adverse influences of electromagnetic noise without increasing the size and enhancing the performance of a filter circuit. In a brushless motor system comprising a brushless motor, an inverter, and a direct current power source, a noise return line for returning a noise current is connected between the brushless motor and the inverter. The noise current is generated in the inverter and reaches the brushless motor. With the provision of the noise return line, a common mode current leaking from the brushless motor to a ground can be reduced.
US07701157B2	Motor controller and method for controlling motor A motor controller for fully closing and opening a window glass for a vehicle door. The motor controller controls a motor that drives the window glass and includes a relay circuit connected to the motor and switching contact states in accordance with movement of the window glass. An FET is connected to the relay circuit. A sensor detects rotation speed of the motor and generates a detection signal. A CPU, which is connected to the FET and sensor, generates a duty signal having a duty ratio that is in accordance with a waveform of the detection signal generated by the sensor, provides the FET with the duty signal, and drives the motor in accordance with the waveform of the detection signal.
US07701136B2	Organic light-emitting display device Disclosed is an organic light-emitting display device encapsulated with a frit to prevent an infiltration of oxygen and moisture thereinto.There is provided an organic light-emitting display device according to the present invention, comprising: a first substrate comprising a pixel region wherein a pixel is formed and a non-pixel region outside of the pixel region; a second substrate opposed and bonded to the first substrate in one region comprising the pixel region; a frit positioned in the non-pixel region between the first substrate and the second substrate, to bond the first substrate and the second substrate; and at least one electrode line formed on the first substrate and overlapped with a portion of the frit, wherein the electrode line comprises at least one opening in an intersecting region overlapped with the frit.
US07701123B2	Electron source for ionization with leakage current suppression An electron source includes a first electrode, a second electrode, a thermionic element interposed between and electrically isolated from the first electrode and the second electrode, and a guard electrode interposed between and electrically isolated from the first electrode and the second electrode. The thermionic element and the guard electrode may be at substantially the same voltage. Another electron source includes a first electrode, a second electrode, a thermionic element interposed between and electrically isolated from the first electrode and the second electrode, and a thermal expansion component interposed between and electrically isolated from the first electrode and the second electrode. The thermal expansion component may be heated to cause expansion. The heating may be cycled to cause alternating expansion and contraction.
US07701121B2	Piezoelectric substance and piezoelectric element A piezoelectric substance has a substrate, an electrode formed on the substrate, and a piezoelectric film formed on the electrode. The piezoelectric film is formed of crystals having a main phase of (NaxKyLiz)NbO3 (0 and <110> crystalline axes in the direction normal to the substrate surface, and the axes of its crystals oriented to each crystalline axis are also formed in the same direction in the in-plane direction of the substrate.
US07701120B2	Piezoelectric generators for munitions fuzing and the like A method for generating power from acceleration of a device is provided. The method including: applying a force to a piezoelectric member due to the acceleration; and sustaining a strain in the piezoelectric member resulting from the applied force so as to increase a time of power output from the piezoelectric member. The device can be a munition.
US07701114B2	Surface acoustic wave device A surface acoustic wave device has a duty that is greater than about 0.5, attenuation outside the pass band is increased, and an undesirable spurious response is effectively suppressed. The surface acoustic wave device includes an LiNbO3 substrate having Euler angles (0°±5°, θ±5°, 0°±10°), an electrode that is provided on the LiNbO3 substrate and that includes an IDT electrode primarily made of Cu, a first silicon oxide film that is provided in an area other than an area in which the electrode is arranged so as to have a thickness substantially equal to that of the electrode, and a second silicon oxide film that is arranged so as to cover the electrode and the first silicon oxide film, wherein the surface acoustic wave device utilizes an SH wave, wherein a duty D of the IDT electrode 3 is at least about 0.52, and θ of the Euler angles (0°±5, θ+5°, 0°±10°) is set so as to fall within a range that satisfies the following Inequality (1A) or (1B): (1) When 0.52≦D≦0.6, −10×D+92.5−100×C≦θ≦37.5×D2−57.75×D+104.075+5710×C2−1105.7×C+45.729 Inequality (1A) (2) When D>0.6, 86.5−100×C≦θ≦37.5×D2−57.75×D+104.075+5710×C2−1105.7λC+45.729 Inequality (1B) where D is a duty, and C is a thickness of the IDT.
US07701110B2	Ultrasonic transducer and manufacturing method thereof A technique capable of obtaining an ultrasonic transducer at high sensitivity in which a plurality of ultrasonic oscillators M1 each comprising a lower electrode fixed above a substrate, a diaphragm opposed to the substrate with a cavity being put therebetween, and an upper electrode disposed to the diaphragm are arranged above one identical substrate to constitute an ultrasonic transducer and a concentric convex corrugated region having a center identical with the center for the diaphragm is disposed to the diaphragm in an outer side of the cavity exceeding 70% for the radius thereof.
US07701106B2	Electric submersible pumps A downhole electric motor for a submersible pump has at least three phases and comprises a permanent magnet rotor and a stator bearing phase windings A, B and C in slots (2206) in the stator. Each phase winding A, B, C incorporates a coil extending through a respective pair of adjacent stator slots (2206) and surrounds a respective portion of the stator between the slots (2206). Furthermore adjacent coils of each pair of phase windings A, B, C extend through opposite parts of a respective one of the slots (2206), so that these coils extend alongside one another in the slot, either being separated by a gap through which cooling fluid may be pumped to cool the coils, or being separated by a thermally conductive projection (3110), with which the coils are in thermal contact, extending at least part of the way across the slot. Such a winding arrangement is advantageous in ensuring that the motor has a long life.
US07701100B2	Synchronous motor A synchronous motor having a rotor, a magnet positioned on the rotor and a clamping element that fixes the magnet on the rotor, wherein the clamping element includes a strip arranged between the magnet and the rotor.
US07701093B2	Linear motor When a pitch between centers of two adjacent magnetic pole portions disposed on an armature is defined as τs, the length W of permanent magnets disposed in the middle is equal to the pitch τs (W=τs). The length of each of the two end permanent magnets respectively disposed at either end of a permanent magnet magnetic pole row is denoted by W1. A ratio w1/W of the length W1 to the length W is defined as 0.43
US07701085B2	Grid interconnection device, grid interconnection system and power control system The grid interconnection device connected to the bank where alternating-current power is transmitted and to the power supply device provided to a customer includes: a detector detecting start of the alternating-current power transmission based on a state of the alternating-current power; a receiver receiving a grid interconnection start instruction for starting grid interconnection between the bank and the power supply device; and a grid interconnection controller controlling the bank and the power supply device to be interconnected or separated, in which the grid interconnection controller starts grid interconnection between the bank and the power supply device upon receipt of the grid interconnection start instruction in a state where the start of the alternating-current power transmission is detected.
US07701077B2	Secondary power for critical loads for railroad In a locomotive having at least one electrical load connected to at least one power source via a locomotive power carrying bus, a system for ensuring a current connection between the at least one power source and the at least one electrical load is provided. The system includes a first rectification device, wherein the first rectification device is connected between the at least one electrical load and the locomotive power carrying bus to provide a rectified current connection between a first power source and the at least one electrical load. The system further includes a second rectification device, wherein the second rectification device is connected between the at least one electrical load and the locomotive power carrying bus to provide a current connection between a second power source and the at least one electrical load and at least one auxiliary rectification device, wherein the at least one auxiliary rectification device is connected to the at least one electrical load and at least one of the first rectification device and the second rectification device to ensure a continuous current connection between the at least one power source and the at least one electrical load.
US07701075B2	Hybrid electrical power source combining stirling engine driven alternator with supplementing electrical energy storage An electrical power source including a free-piston Stirling engine driving an alternator to supply power through a bus to a user load and controlled by an engine/alternator controller. A bidirectional DC/DC converter is connected between a battery and the bus. The stroke of the engine piston is modulated between a maximum and a minimum stroke to maintain the bus voltage at a design nominal bus voltage (V1), and charge the battery if it is not charged, when and so long as the bus voltage does not fall below a design nominal bus voltage (V1). The Stirling engine is operated at its maximum piston stroke, and the battery is charged if it is not charged, when the bus voltage is in the range between the design nominal bus voltage (V1) and a design minimum battery charging bus voltage (V2). The Stirling engine is operated at its maximum piston stroke and the battery is disconnected from the bus so it can not charge when the bus voltage is in the range between the design minimum battery charging bus voltage (V2) and a design minimum bus voltage (V3). The Stirling engine is operated at its maximum piston stroke and power is applied from the battery to the bus for maintaining the bus voltage at the design minimum bus voltage (V3) when the power supplied from the alternator operating at its maximum stroke is less than the power demand of the load.
US07701074B2	Semiconductor device with a buffer region with tightly-packed filler particles An embodiment of a semiconductor device includes a supporting member, a semiconductor die mounted on a portion of the supporting member, a buffer region, and a plastic encapsulation. The buffer region covers a portion of the die, and includes a resin and filler particles packed within the resin. The filler particles have a mix of filler sizes and are tightly packed within the resin. The buffer region has a first dielectric constant and a first loss tangent. The plastic encapsulation encloses at least part of the supporting member and the die. The plastic encapsulation includes a plastic material of a second dielectric constant and a second loss tangent, where the second dielectric constant is larger than the first dielectric constant and the second loss tangent is larger than the first loss tangent.
US07701071B2	Method for fabricating flip-attached and underfilled semiconductor devices A semiconductor device (1700), which comprises a workpiece (1201) with an outline (1711) and a plurality of contact pads (1205) and further an external part (1701) with a plurality of terminal pads (1702). This part is spaced from the workpiece, and the terminal pads are aligned with the workpiece contact pads, respectively. A reflow element (1203) interconnects each of the contact pads with its respective terminal pad. Thermoplastic material (1204) fills the space between the workpiece and the part; this material adheres to the workpiece, the part and the reflow elements. Further, the material has an outline (1711) substantially in line with the outline of the workpiece, and fills the space (1707) substantially without voids. Due to the thermoplastic character of the filling material, the finished device can be reworked, when the temperature range for reflowing the reflow elements is reached.
US07701059B1	Low resistance metal silicide local interconnects and a method of making A process for forming a local interconnect includes applying a layer of metal over a semiconductor layer. A layer of metal silicide is formed over the layer of metal. The layer of metal silicide is patterned to define the boundaries of the local interconnect. The metal silicide is reacted with the layer of metal to form a composite structure. The composite structure includes the metal silicide, another metal silicide formed as silicon from the metal silicide reacts with the underlying layer of metal and an intermetallic compound of the metal from the layer of metal and metal from the layer of metal silicide. The unreacted layer of metal is removed with the composite structure remaining as the local interconnect.
US07701045B2	Point-to-point connection topology for stacked devices The point-to-point interconnection system for stacked devices includes a device, a substrate, operational circuitry, at least three electrical contacts and a conductor. The substrate has opposing first and second surfaces. A first electrical contact is mechanically coupled to the first surface of the device and electrically coupled to the operational circuitry. The second electrical contact is mechanically coupled to the first surface. The third electrical contact is mechanically coupled to the second surface opposite the first electrical contact. The conductor electrically couples the second electrical contact to the third electrical contact.
US07701036B2	Inductor with plural coil layers An inductor with plural coil layers includes a base wafer; a plurality of insulating layers sequentially laminated on one surface of the base wafer; and a plurality of coil layers built in the plurality of insulating layers, respectively, and having different magnetic flux passage areas.
US07701035B2	Laser fuse structures for high power applications The present invention relates to a laser fuse structure for high power applications. Specifically, the laser fuse structure of the present invention comprises first and second conductive supporting elements (12a, 12b), at least one conductive fusible link (14), first and second connection elements (20a, 20b), and first and second metal lines (22a, 22b). The conductive supporting elements (12a, 12b), the conductive fusible link (14), and the metal lines (22a, 22b) are located at a first metal level (3), while the connect elements (20a, 20b) are located at a second, different metal level (4) and are connected to the conductive supporting elements (12a, 12b) and the metal lines (22a, 22b) by conductive via stacks (18a, 18b, 23a, 23b) that extend between the first and second metal levels (3, 4).
US07701032B2	Compound semiconductor device A separation element formed of one of a conduction region and a metal layer is placed between two elements in proximity to each other. The separation element is connected to a high resistance element and to a direct current terminal pad. A connection route extending from the direct current terminal pad to the separation element is a route in which a potential does not vibrate with high frequency. This results in a placement of a high frequency GND potential between the two elements, at least one of which is subjected to transmitting the high frequency signals, whereby leak of the high frequency signals can be prevented between the two elements.
US07701031B2	Integrated circuit structure and manufacturing method thereof An integrated circuit structure is described, and includes a substrate, a contact window, and a Schottky contact metal layer. A heavily doped region and a lightly doped region are formed in the substrate. The contact window is disposed above the heavily doped region, and the Schottky contact metal layer is disposed above the lightly doped region. The Schottky contact metal layer and the substrate form a Schottky diode. The material of the contact window is different from that of the Schottky contact metal layer.
US07701026B2	Imaging device A backside imaging device includes a bump that is disposed overlapping with a sensor array region or a photodiode in a planar view. By this configuration, the bump becomes a support, and the semiconductor substrate is prevented from being damaged because of a bending applied to the semiconductor substrate.
US07701025B2	Method and device for concentrating light in optoelectronic devices using resonant cavity modes A grating structure for channeling and concentrating incident radiation includes a regular pattern of elements each with a metallic shell partially surrounding at least one subcavity. The subcavity is filled with a dielectric or semiconductor. Light of one or more predetermined wavelength ranges can be concentrated in the subcavity(s) and then efficiently channeled through the grooves between adjacent elements. An optoelectronic device includes the structure superposed on a substrate, which can be semiconductive, and the elements of the grating used as electrodes and adapted to allow a potential difference between adjacent (electrode) elements. The optoelectronic devices include photodetectors, e.g., metal-semiconductor-metal, pn, pin, avalanche, LEDs, IR emitting devices, and biological or chemical sensors.
US07701021B2	Functional device, semiconductor device, and electronic device A functional device in which the functional portion is not influenced by events in film forming, and thereby the reliability of the device can be improved is provided. The functional device includes a substrate, one or a plurality of functional portions formed on a surface of the substrate, a sealing layer that forms a space around the functional portion, and has one or a plurality of apertures sealed with a filling material, and one or a plurality of walls formed between the functional portion and the aperture without separating the space.
US07701018B2	Semiconductor device and method for manufacturing same A semiconductor device comprising a first semiconductor region and a second semiconductor region, (a) wherein a field effect transistor is comprised of the first semiconductor region comprising at least one semiconductor layer(s) protruding upward from a substrate, a gate electrode(s) formed via an insulating film such that the gate electrode(s) strides over the semiconductor layer(s) and source/drain regions provided in the semiconductor layer(s) on both sides of the gate electrode(s), whereby a channel region is formed in at least both sides of the semiconductor layer(s), (b) wherein the second semiconductor region comprises semiconductor layers protruding upward from the substrate and placed, at least opposing the first semiconductor region at both ends in the direction perpendicular to a channel current direction and the side surface of the semiconductor layers facing the first semiconductor region is parallel to the channel current direction.
US07701014B2	Gating configurations and improved contacts in nanowire-based electronic devices Methods, systems, and apparatuses for electronic devices having improved gate structures are described. An electronic device includes at least one nanowire. A gate contact is positioned along at least a portion of a length of the at least one nanowire. A dielectric material layer is between the gate contact and the at least one nanowire. A source contact and a drain contact are in contact with the at least one nanowire. At least a portion of the source contact and/or the drain contact overlaps with the gate contact along the nanowire the length. In another aspect, an electronic device includes a nanowire having a semiconductor core surrounded by an insulating shell layer. A ring shaped first gate region surrounds the nanowire along a portion of the length of the nanowire. A second gate region is positioned along the length of the nanowire between the nanowire and the substrate. A source contact and a drain contact are coupled to the semiconductor core of the nanowire at respective exposed portions of the semiconductor core.
US07701007B2	Thin film transistor with source and drain separately formed from amorphus silicon region A Thin Film Transistor comprises a gate electrode formed on a substrate; a gate insulation layer covering the gate electrode; an amorphous silicon (a-Si) region disposed on the gate insulation layer and above the gate electrode; a doped a-Si region formed on the a-Si region; the source and drain metal regions separately formed on the doped a-Si region and above the gate electrode, and isolated from the a-Si region; a passivation layer formed on the gate insulation layer and covering the source, drain and data-line (DL) metal regions; and a conductive layer formed on the passivation layer. The passivation layer has a first, second and third vias for respectively exposing the partial surfaces of the source, drain and DL metal regions. The first, second and third vias are filled with the conductive layer, so that the DL and source metal regions are connected via the conductive layer.
US07701006B2	Method of producing a low-voltage power supply in a power integrated circuit In a chip containing high-voltage device with a semiconductor substrate of a first conductivity type, a method of implementing low-voltage power supply is provided, wherein the electrical potential of an isolated region of a second conductivity type in a surface portion is used as one output terminal or as a voltage by which a transistor is controlled to provide output current for a low-voltage power supply. The other output terminal could be either terminal of the two that apply high voltage to high-voltage device or could be a floating terminal. Using this method, a low-voltage power supply can be implemented not only for the low-voltage integrated circuit (I) in a power IC containing one high-voltage device, but also for the low-voltage integrated circuit in a power IC having totem-pole connection or CMOS connection. As there is no need to implement depletion mode device in the chip, the fabrication cost is reduced.
US07700998B2	Semiconductor device and method for manufacturing the same A type semiconductor device includes: a first semiconductor layer of a first conductivity type; a second semiconductor layer of a second conductivity type; a third semiconductor layer of the first conductivity type; a plurality of gate electrodes which are formed in gate trenches via gate insulating films, the gate trenches being formed through the second semiconductor layer and the third semiconductor layer; a plurality of impurity regions of the second conductivity type which are formed at regions below bottoms of contact trenches, the contact trenches being formed at the third semiconductor layer in a thickness direction thereof between corresponding ones of the gate trenches and longitudinal cross sections of the contact trenches being shaped in ellipse, respectively; first electrodes which are formed so as to embed the contact trenches and contacted with the impurity regions, respectively; and a second electrode formed on a rear surface of the semiconductor substrate.
US07700992B2	Semiconductor device A semiconductor device includes a plurality of nonvolatile memory cells (1). Each of the nonvolatile memory cells comprises a MOS type first transistor section (3) used for information storage, and a MOS type second transistor section (4) which selects the first transistor section. The second transistor section has a bit line electrode (16) connected to a bit line, and a control gate electrode (18) connected to a control gate control line. The first transistor section has a source line electrode (10) connected to a source line, a memory gate electrode (14) connected to a memory gate control line, and a charge storage region (11) disposed directly below the memory gate electrode. A gate withstand voltage of the second transistor section is lower than that of the first transistor section. Assuming that the thickness of a gate insulating film of the second transistor section is defined as tc and the thickness of a gate insulating film of the first transistor section is defined as tm, they have a relationship of tc
US07700987B2	Ferroelectric memory device and method of manufacturing the same A ferroelectric memory device includes a top electrode, a bottom electrode, a ferroelectric film which is sandwiched between the top and bottom electrodes, includes a first portion having a side surface flushed with a side surface of the top electrode and a second portion having a side surface flushed with a side surface of the bottom electrode, and has a step formed by making the side surface of the second portion project outward from the side surface of the first portion, a top mask which is provided on the top electrode, and a side mask which is provided on part of a side surface of the top mask, the side surfaces of the top electrode and the first portion of the ferroelectric film and has a top at a lower level than a top of the top mask and at a higher level than a top of the top electrode.
US07700986B2	Chip package carrier and fabrication method thereof A chip package carrier is disclosed, which includes a first circuit layer, a second circuit layer, a core layer, a third circuit layer, a first dielectric layer between the first and third circuit layers, a fourth conductive layer including at least a solder ball pad, a second dielectric layer between the second and fourth circuit layers and at least a capacitor device, wherein the core layer has at least a first through-hole; the third circuit layer is disposed above the first circuit layer and includes at least a die pad; the capacitor device is disposed in the first through-hole. The capacitor device herein includes a first pillar electrode covering the wall of the first through-hole, a cylindrical capacitor material disposed in the first pillar electrode and having a first blind hole, and a second pillar electrode disposed in the first blind hole and connected to the die pad.
US07700984B2	Semiconductor device including memory cell It is an object of the present invention to provide a semiconductor device capable of additionally recording data at a time other than during manufacturing and preventing forgery due to rewriting and the like. Moreover, another object of the present invention is to provide an inexpensive, nonvolatile, and highly-reliable semiconductor device. A semiconductor device includes a first conductive layer, a second conductive layer, and an organic compound layer between the first conductive layer and the second conductive layer, wherein the organic compound layer can have the first conductive layer and the second conductive layer come into contact with each other when Coulomb force generated by applying potential to one or both of the first conductive layer and the second conductive layer is at or over a certain level.
US07700982B2	Magnetoresistive effect element and magnetic memory device Write characteristics and read characteristics can be improved at the same time by applying novel materials to ferromagnetic layers. In a magneto resistive effect element having a pair of ferromagnetic layers being opposed to each other through an intermediate layer to cause a current to flow in the direction perpendicular to the film plane to obtain a magnetoresistive change, at least one of the ferromagnetic layers contains a ferromagnetic material containing Fe, Co and B. The ferromagnetic material should preferably contain FeaCobNicBd (in the chemical formula, a, b, c and d represent atomic %. 5≦a≦45, 35≦b≦85, 0≦c≦35, 10≦d≦30, a+b+C+d=100).
US07700972B2	Semiconductor device A semiconductor device comprises an AlN layer, a GaN layer, and an AlGaN layer sequentially formed on a semiconductor substrate. A first opening extends through said GaN layer and said AlGaN layer and exposes part of an upper surface of the AlN layer. A second opening extends through the semiconductor substrate and exposes a part of a lower surface of the AlN layer, in a location facing the first opening. A upper electrode is exposed on an upper surface of the AlN layer in the first opening; and a lower electrode is disposed on a lower surface of the AlN layer in the second opening.
US07700971B2	Insulated gate silicon carbide semiconductor device An insulated gate silicon carbide semiconductor device is provided having small on-resistance. The device combines a static induction transistor structure with an insulated gate field effect transistor structure. The advantages of both the SIT structure and the insulated gate field effect transistor structure are obtained. The structures are formed on the same SiC semiconductor substrate, with the MOSFET structure above the SIT structure. The SIT structure includes a p+ gate region in an n-type drift layer on an n+ SiC semiconductor substrate, and an n+ first source region on the surface of the drift layer. The MOSFET structure includes a p-well region on the surface of the first source region, a second source region formed in the p-well region, and a MOS gate structure formed in a trench extending from the second source region to the first source region. The p+ gate region and a source electrode are conductively connected.
US07700967B2	Illumination device with a wavelength converting element held by a support structure having an aperture An illumination device includes a light source, such as one or more light emitting diodes and a wavelength converting element that is mounted on an opaque support structure. The support structure includes an aperture with which the wavelength converting element is aligned so that the converted light is emitted through the aperture. The wavelength converting element may be a rigid structure, such as a luminescent ceramic and the aperture may be a hole through the support structure. The support structure may hold the wavelength converting element so that it is physically separated from the light source, or alternatively, the support structure may place the wavelength converting element in physical contact with the light source.
US07700962B2	Inverted-pyramidal photonic crystal light emitting device A light-emitting device (LED) is described which exhibits high extraction efficiency and an emission profile which is substantially more directional than from a Lambertian source. The device comprises a light generating layer disposed between first and second layers of semiconductor material, each having a different type of doping. An upper surface of the first layer has a tiling arrangement of inverted pyramidal or inverted frustro-pyramidal indentations in the semiconductor material filled by a material of different refractive index and which together comprise a photonic band structure. The indentations and their tiling arrangement are configured for efficient extraction of light from the device via the upper surface of the first layer and in a beam that is substantially more directional than from a Lambertian source. An enhanced device employs a reflector beneath the second layer to utilise the microcavity effect. A method for fabricating the device is also described which employs anisotropic wet etching to produce the inverted pyramidal or inverted frustro-pyramidal indentations.
US07700961B2	Semiconductor light emitting device and method for manufacturing the same Provided is a semiconductor light emitting device and a method for manufacturing the same. The semiconductor light emitting device comprises: a first conductive type semiconductor layer; an active layer on the first conductive type semiconductor layer; an undoped semiconductor layer on the active layer; a first delta-doped layer on the undoped semiconductor layer; and a second conductive type semiconductor layer on the first delta-doped layer.
US07700960B2	Light emitting diode with ITO layer and method for fabricating the same The present invention relates to a light emitting diode with enhanced luminance and light emitting performance due to increase in efficiency of current diffusion into an ITO layer, and a method of fabricating the light emitting diode. According to the present invention, there is manufactured at least one light emitting cell including an N-type semiconductor layer, an active layer and a P-type semiconductor layer on a substrate. The method of the present invention comprises the steps of (a) forming at least one light emitting cell with an ITO layer formed on a top surface of the P-type semiconductor layer; (b) forming a contact groove for wiring connection in the ITO layer through dry etching; and (c) filling the contact groove with a contact connection portion made of a conductive material for the wiring connection.
US07700959B2	Semiconductor light-emitting device, semiconductor light-emitting apparatus, and method of manufacturing semiconductor light-emitting device A semiconductor light-emitting device capable of obtaining a high light reflectance through the use of a high-reflection metal layer formed on the side of an electrode on one side and capable of preventing migration of atoms from the high-reflectance metal layer is provided. Semiconductor layers of the opposite conduction types are formed on the opposite sides of an active layer, and an ohmic contact layer being a thin film for contriving a decrease in contact resistance, a transparent and conductive layer, and a high-reflection metal layer for reflecting light generated in the active layer are sequentially layered on one of the semiconductor layers. Since the transparent conductive layer functions also as a barrier layer and it transmits light, a high light take-out efficiency can be obtained through the reflection at the high-reflectance metal layer.
US07700956B2	Sensor component and panel used for the production thereof A sensor component and a panel used for the production thereof is disclosed. The sensor component has, in addition to a sensor chip with a sensor region, a rear side and passive components. These are embedded jointly in a plastics composition, in such a way that their respective electrodes can be wired from an overall top side of a plastic plate.
US07700945B2	On-chip storage of hardware events for debugging An integrated circuit (IC) die includes a plurality of edge counters. Each edge counter is provided to detect at least one change in signal level at a respective location on the IC die. The IC die is in communication with a memory and also includes an event recording circuit on the IC die provided to store states of the counters in the memory.
US07700944B2	Semiconductor wafer, semiconductor chip, and semiconductor chip inspection method Inspection wire is formed along at least a portion of the outer periphery of, and preferably along the entire perimeter of, a chip area enclosed by scribe areas, using an arbitrary wiring layer, conductive material, or diffusion layer of the semiconductor chip, and the opposite ends of the inspection wire are connected, via a wiring layer and contact plugs, to pads on the semiconductor chip, either directly or via prescribed switching means. By measuring the resistance of the inspection wire before and after dicing using the pads, chips and cracks occurring during dicing of the semiconductor chip, as well as chipping which progresses in subsequent packaging and assembly processes, or due to the application of stress, shocks, thermal cycles or similar after incorporation into products, can be detected.
US07700938B2	Adapting short-wavelength LED's for polychromatic, broadband, or “white” emission An adapted LED is provided comprising a short-wavelength LED and a re-emitting semiconductor construction, wherein the re-emitting semiconductor construction comprises at least one potential well not located within a pn junction. The potential well(s) are typically quantum well(s). The adapted LED may be a white or near-white light LED. The re-emitting semiconductor construction may additionally comprise absorbing layers surrounding or closely or immediately adjacent to the potential well(s). In addition, graphic display devices and illumination devices comprising the adapted LED according to the present invention are provided.
US07700936B2	Fabrication of quantum dots embedded in three-dimensional photonic crystal lattice In one embodiment, a method of producing an optoelectronic nanostructure includes preparing a substrate; providing a quantum well layer on the substrate; etching a volume of the substrate to produce a photonic crystal. The quantum dots are produced at multiple intersections of the quantum well layer within the photonic crystal. Multiple quantum well layers may also be provided so as to form multiple vertically aligned quantum dots. In another embodiment, an optoelectronic nanostructure includes a photonic crystal having a plurality of voids and interconnecting veins; a plurality of quantum dots arranged between the plurality of voids, wherein an electrical connection is provided to one or more of the plurality of quantum dots through an associated interconnecting vein.
US07700934B2	Electric device with nanowires comprising a phase change material A method of manufacturing an electric device including providing a body with a resistor of a phase change material being changeable between a first phase and a second phase, the resistor having a first electrical resistance when the phase change material is in the first phase, and a second electrical resistance different from the first electrical resistance when the phase change material is in the second phase. The method further includes connecting the resistor between first and second conductors.
US07700932B2	Method, set, and apparatus for obtaining prints of a part of the human body A part of a human body is caused to contact the surface layer of a recording medium over which a plurality of metallic grains with an outside size of 200 nm or less are distributed. Then, secretions from the skin surface of the body part are caused to adhere to the surface layer of the recording medium to take the print of the body part. If light is irradiated to the recording medium, specific optical characteristics resulting from the surface structure of the recording medium are obtained, and therefore the color of the recording medium varies between a region having secretions and a region having no secretions. This renders it possible to record a visible print on the recording medium.
US07700930B2	Lithographic apparatus with rotation filter device A lithographic apparatus including a filter device is disclosed. The filter device has a plurality of foils attached to a holder which is able to rotate around a rotation axis. The foils are arranged substantially parallel to the rotation axis. The foils comprise a uni-directional carbon-fiber composite material selected from the group consisting of carbon-carbon composite (C-C composite) and carbon-silicon carbide composite (C—SiC composite). During operation, the filter device rotates and filters out debris from a radiation source, such as a Sn plasma source. Such a filter device per se may be provided.
US07700927B2	Heating stage for a micro-sample The present invention achieves a heating stage for a micro-sample, capable of efficient heating and accurate observation of the micro-sample. A micro-sample mount is a heating portion in coil form and is fixed at both ends to a base for the heating stage for the micro-sample. The base can be divided into two members at a base cut line, and the mount is fixed at one end to the first member and is fixed at the other end to the second member. A sample subjected to micro-sampling is mounted on the mount. The base is removed from the tip of a holder, and is mounted on a stage for the sample stage. A current is fed to the micro-sample mount through the members to thereby apply heat to a micro-sample for observation.
US07700911B1	Fabrication of 3-D ion optics assemblies by metallization of non-conductive substrates A cylindrical ion trap (CIT) mass spectrometer constructed using a non-conductive substrate (LTCC) as the basis for the ring electrode. Photolithography and electroless plating were used to create well-defined conductive areas on the LTCC ring electrode. The inventive method allows for the precise control of establishing conductive areas on a non-conductive substrate through the steps of punching, lamination, firing, metallization and photolithography on the metallized layer.
US07700906B2	Optical elements, related manufacturing methods and assemblies incorporating optical elements The present invention relates to various optical elements, related manufacturing methods and systems incorporating the optical elements. In at least one embodiment an optical element is provided that improves a vision system's capability to accurately measure a spectral characteristic of a distant light source.
US07700903B2	Method and apparatus for the auto-focussing infinity corrected microscopes The invention is directed at a method and apparatus for auto-focusing an infinity corrected microscope. Light beams are directed and then converged towards a specimen of interest and at least one image is formed from the reflected light. The image, or images, are then reviewed and calibration measurements are retrieved from the image. These calibration measurement are then used to determine focusing measurements which are used to auto-focus the microscope.
US07700893B2	System and method for calibrating wire feeder motor control The present invention is directed to an apparatus and method for controlling a wire feeder. The wire feeder includes a wire feeder motor configured to drive delivery of a welding wire at an actual wire feed speed (WFS) according to a welding-type process. The wire feeder also includes a processor configured to adjust motor calibration parameters such that actual WFS matches a desired WFS.
US07700889B2	Double-shot molded button and method for making the same A double-shot molded button includes a main portion including an operation surface and at least one inserted portion embedded in the main portion. The inserted portion includes an exposed surface exposed from the operation surface to configure a symbol for denoting an operation function and being pressed. An orthographic projection image of the inserted portion on the exposed surface is enclosed within the exposed surface. A method for making the double-shot molded button is also provided.
US07700885B2	Wiring board A wiring board (1, 1a, 20, 20a) having: a board body (2, 22) including an insulating material and having a front surface (3, 23), a back surface (4, 24), a cavity (5, 25) having an opening in the front surface (3, 23) of the board body (2, 22) and having a bottom surface (6, 26) and a side surface (7, 27), and a projection which is provided on a front surface side of the side surface (7, 27) of the cavity and projects toward a center of the opening; a metal layer (11) provided on the side surface (7, 27) of the cavity; and an insulating portion which is provided on a back surface (9, 29) of the projection (8, 28) so as to define an obtuse angle (θ) with the metal layer (11), or which covers at least a top end portion of the metal layer (11).
US07700876B2	External device and electronic apparatus An external device that is electrically connected to a main unit by a plurality of electric cables includes a first casing member storing a function unit; an external cover covering the first casing member; and a first space provided between the first casing member and the external cover. The electric cables are pulled out of the first casing member, bundled together, supported by the first casing member, and extended out of the external cover through the first space.
US07700875B2	Switch box extender grounding strap An electrical box extender with a grounding strap which includes an extender having a perimeter wall section and an integral bendable grounding strap connected to the wall section, wherein the grounding strap extends from the wall section and has a remote end that includes a spade or lug connector for attaching to a ground.
US07700862B2	Method of improving the acoustic characteristics of resonant wood for musical instruments Method of improving the acoustic characteristics of resonant wood for musical instruments, characterised in that during a limited period of treatment the resonant wood is exposed to the action of a type of fungus which decomposes wood, wherein the type of fungus and the period of treatment are chosen in such a way that by the treatment on the one hand an increase in the ratio of velocity of sound of the wood to bulk density of the wood is achieved and on the other hand strength values of the resonant wood do not fall below predetermined minimum values. The invention also relates to a resonant wood for musical instruments, with predetermined minimum strength values of the resonant wood, wherein treatment over a limited time by means of a type of fungus which decomposes wood treatment increases the ratio of velocity of sound of the wood to bulk density of the wood.
US07700858B2	Plants and seeds of hybrid corn variety CH168616 According to the invention, there is provided seed and plants of the hybrid corn variety designated CH168616. The invention thus relates to the plants, seeds and tissue cultures of the variety CH168616, and to methods for producing a corn plant produced by crossing a corn plant of variety CH168616 with itself or with another corn plant, such as a plant of another variety. The invention further relates to genetic complements of plants of variety CH168616.
US07700856B1	Maize variety X6K236 A novel maize variety designated X6K236 and seed, plants and plant parts thereof, produced by crossing Pioneer Hi-Bred International, Inc. proprietary inbred maize varieties. Methods for producing a maize plant that comprises crossing maize variety X6K236 with another maize plant. Methods for producing a maize plant containing in its genetic material one or more traits introgressed into X6K236 through backcross conversion and/or transformation, and to the maize seed, plant and plant part produced thereby. This invention relates to the maize variety X6K236, the seed, the plant produced from the seed, and variants, mutants, and minor modifications of maize variety X6K236. This invention further relates to methods for producing maize varieties derived from maize variety X6K236 and to the maize varieties derived by the use of those methods.
US07700855B1	Maize variety X6N727 A novel maize variety designated X6N727 and seed, plants and plant parts thereof, produced by crossing Pioneer Hi-Bred International, Inc. proprietary inbred maize varieties. Methods for producing a maize plant that comprises crossing maize variety X6N727 with another maize plant. Methods for producing a maize plant containing in its genetic material one or more traits introgressed into X6N727 through backcross conversion and/or transformation, and to the maize seed, plant and plant part produced thereby. This invention relates to the maize variety X6N727, the seed, the plant produced from the seed, and variants, mutants, and minor modifications of maize variety X6N727. This invention further relates to methods for producing maize varieties derived from maize variety X6N727 and to the maize varieties derived by the use of those methods.
US07700853B1	Inbred corn line XHH13 An inbred corn line, designated XHH13, the plants and seeds of the inbred corn line XHH13, methods for producing a corn plant, either inbred or hybrid, produced by crossing the inbred corn line XHH13 with itself or with another corn plant, and hybrid corn seeds and plants produced by crossing the inbred line XHH13 with another corn line or plant and to methods for producing a corn plant containing in its genetic material one or more transgenes and to the transgenic corn plants produced by that method. This invention also relates to inbred corn lines derived from inbred corn line XHH13, to methods for producing other inbred corn lines derived from inbred corn line XHH13 and to the inbred corn lines derived by the use of those methods.
US07700847B2	Soybean variety D5898941 The invention relates to the soybean variety designated D5898941. Provided by the invention are the seeds, plants and derivatives of the soybean variety D5898941. Also provided by the invention are tissue cultures of the soybean variety D5898941 and the plants regenerated therefrom. Still further provided by the invention are methods for producing soybean plants by crossing the soybean variety D5898941 with itself or another soybean variety and plants produced by such methods.
US07700844B2	Soybean variety 4991629 The invention relates to the soybean variety designated 4991629. Provided by the invention are the seeds, plants and derivatives of the soybean variety 4991629. Also provided by the invention are tissue cultures of the soybean variety 4991629 and the plants regenerated therefrom. Still further provided by the invention are methods for producing soybean plants by crossing the soybean variety 4991629 with itself or another soybean variety and plants produced by such methods.
US07700842B2	Identification of a new class of EPSP synthases Compositions and methods for conferring tolerance to glyphosate in bacteria, plants, plant cells, tissues and seeds are provided. Compositions include a novel class of EPSPS enzymes, designated Class III, and polynucleotides encoding such enzymes, vectors comprising those polynucleotides, and host cells comprising the vectors. The novel proteins comprise at least one sequence domain selected from the Class III domains provided herein. These sequence domains can be used to identify EPSP synthases with glyphosate resistance activity.
US07700841B2	Pea line 08540794 The invention provides seed and plants of the pea line designated 08540794. The invention thus relates to the plants, seeds and tissue cultures of pea line 08540794, and to methods for producing a pea plant produced by crossing a plant of pea line 08540794 with itself or with another pea plant, such as a plant of another line. The invention further relates to seeds and plants produced by such crossing. The invention further relates to parts of a plant of pea line 08540794, including the seed, pod, and gametes of such plants.
US07700838B1	Bacillus thuringiensis chromosomal genome sequences and uses thereof The present invention relates to nucleic acid sequences from Bacillus thuringiensis and, in particular, to genomic DNA sequences. The invention encompasses nucleic acid molecules present in non-coding regions as well as nucleic acid molecules that encode proteins, fragments of proteins, tRNA's, fragments of tRNA's, rRNA's and fragments of rRNA's. In addition, proteins and fragments of proteins so encoded and antibodies capable of binding the proteins are encompassed by the present invention. The invention also relates to methods of using the disclosed nucleic acid molecules, proteins, fragments of proteins, RNA's, and antibodies, for example, for gene identification and analysis, and preparation of constructs.
US07700836B2	Seed-preferred regulatory elements The present invention provides compositions and methods for regulating expression of nucleotide sequences in a plant. Compositions are novel nucleotide sequences for a tissue preferred promoter isolated from the sorghum 16 kDa oleosin coding region. The sequences drive expression preferentially to seed tissue, and most preferably to embryo and/or aleurone tissue of a plant. Functional fragments of same are also provided. A method for expressing a nucleotide sequence in a plant using the regulatory sequences disclosed herein is provided. The method comprises transforming a plant cell to comprise a nucleotide sequence operably linked to one or more of the regulatory sequences of the present invention and regenerating a stably transformed plant from the transformed plant cell.
US07700834B2	Nicotiana nucleic acid molecules and uses thereof The present invention features Nicotiana nucleic acid sequences such as sequences encoding constitutive, or ethylene or senescence induced polypeptides, in particular cytochrome p450 enzymes, in Nicotiana plants and methods for using these nucleic acid sequences and plants to alter desirable traits, for example by using breeding protocols.
US07700833B2	Process for the production of unsaturated fatty acids The invention relates to processes for the production of unsaturated fatty acids, preferably of conjugated polyunsaturated fatty acids such as conjugated linoleic acid (CLA), by the recombinant expression of desaturases from insects of the order Lepidoptera. Expression preferably takes place in an organism selected from the group of the plant organisms, yeasts, fungi and algae. Also, according to the invention are recombinant expression cassettes for the recombinant expression of desaturases from insects of the order Lepidoptera, and the transgenic organisms transformed with these.
US07700830B2	Methods for transforming plants to express delta-endotoxins Disclosed is a means of controlling plant pests by a novel method of expressing Cry2A B. thuringiensis δ-endotoxins in plants. The invention comprises novel nucleic acid segments encoding proteins comprising Cry2A B. thuringiensis δ-endotoxins. The nucleic acid segments are disclosed, as are transformation vectors containing the nucleic acid segments, plants transformed with the claimed segments, methods for transforming plants, and methods of controlling plant infestation by pests.
US07700822B2	Modulation of cytochrome P450 reductase activity The present invention relates to non-human transgenic animals, tissues and/or cells derived therefrom having depleted or ablated cytochrome P450 reductase (CPR) expression, methods of producing such animals, tissues and/or cells, and methods of using such animals, tissues and/or cells. Non-human transgenic animals, tissues and or cells derived therefrom of the present invention may be used for, but non exclusively, in both in vivo and in vitro screening of therapeutic agents, drug development, drug metabolism/disposition studies and studying disease states, pregnancy, fetal development, modulation of hormone function and hormone levels, and other pathways and/or substrate metabolism in which cytochrome P450 plays a role.
US07700816B2	Catalytic conversion of oxygenates to olefins An oxygenate conversion catalyst useful in the conversion of oxygenates such as methanol to olefinic products may be improved by the use of a catalyst combination based on a molecular sieve in combination with a co-catalyst comprising a mixed metal oxide composition which has oxidation/reduction functionality under the conditions of the conversion. This metal oxide co-catalyst component will comprise a mixed oxide of one or more, preferably at least two, transition metals, usually of Series 4, 5 or 6 of the Periodic Table, with the metals of Series 4 being preferred, as an essential component of the mixed oxide composition. The preferred transition metals are those of Groups 5, especially titanium and vanadium, Group 6, especially chromium or molybdenum, Group 7, especially manganese and Group 8, especially cobalt or nickel. Other metal oxides may also be present. The preferred molecular sieve components in these catalysts are the high silica zeolites and the SAPOs, especially the small pore SAPOs (8-membered rings), such as SAPO-34. These catalyst combinations exhibit reduced coke selectivity have the potential of achieving extended catalyst life. In addition, these catalysts have the capability of selectively converting the hydrogen produced during the conversion to liquid products, mainly water, reducing the demand on reactor volume and product handling.
US07700815B2	Method for producing fluorinated organic compounds Disclosed is a method for producing fluorinated organic compounds, including petnafluoropropenes, which preferably comprises converting at least one compound of formula (I): CFnXmCFaXbCH2X (I) to at least one compound of formula (II) CF3CF═CHF (II) where each X is independently Cl, I or Br; n is 2 or 3; m is 0 or 1, a is 1 or 2, b is 0 or 1, m+n=3 and a+b=2.
US07700813B2	Catalytic conversion of ethanol and methanol to an isobutanol-containing reaction product using a thermally decomposed hydrotalcite containing the anion of ethylenediaminetetraacetic acid Hydrotalcites containing the anion of ethylenediaminetetraacetic acid are partially or fully thermally decomposed to provide catalysts useful for the conversion of ethanol and methanol to a reaction product comprising isobutanol.
US07700812B2	Catalytic conversion of ethanol to a 1-butanol-containing reaction product using a thermally decomposed hydrotalcite containing the anion of ethylenediaminetetraacetic acid Hydrotalcites containing the anion of ethylenediaminetetraacetic acid are partially or fully thermally decomposed to provide catalysts useful for the conversion of ethanol to a reaction product comprising 1-butanol.
US07700807B2	Process to prepare alkyl phenyl phosphates A process is provided for reacting dichloromonophenyl phosphate and monochlorodiphenyl phosphate with aliphatic alcohol in the presence of a Lewis acid catalyst and absence of solvent, at a temperature above 60 to 200° C. and pressure of 0.001 to 1.1 bara, and sparging the reaction mixture with an inert carrier gas if the pressure is above 0.67 bars. Mixtures of monoalkyl biphenyl phosphates and dialkyl monophenyl phosphates and use of such mixtures as a plasticizer and/or flame retardant, are also provided.
US07700802B2	Method of separating stereoisomers of dicarboxylic acid having norbornene or norbornane structure, or derivative thereof A method of efficiently extracting a high-purity stereoisomer from a mixture comprising the endo isomer and the exo isomer of a dicarboxylic acid having a norbornene or norbornane structure, or a derivative thereof. The present invention relates to a method of separating the endo isomer and the exo isomer of a dicarboxylic acid represented by a general formula (1) or (2) or a derivative thereof, and includes the step of stirring and mixing a mixture comprising mainly the endo isomer of the dicarboxylic acid represented by the general formula (1) or (2) or a derivative thereof, and the exo isomer of the dicarboxylic acid represented by the general formula (1) or (2) or a derivative thereof, with a basic compound and a solvent. (wherein, R1 to R8 represent a hydrogen atom, methyl group, ethyl group, or butyl group), (wherein, R′1 to R′10 represent a hydrogen atom, methyl group, ethyl group, or butyl group).
US07700801B2	Co-production of vinyl acetate and ethyl acetate A method of co-producing vinyl acetate and ethyl acetate includes: (a) reacting ethylene, acetic acid and oxygen to form vinyl acetate and at least a minor amount of ethyl acetate; (b) providing a crude product stream containing the vinyl acetate and ethyl acetate of step (a) and acetic acid to a distillation tower; (c) separating the crude product stream into: (i) a vinyl acetate product stream enriched in vinyl acetate with respect to the crude product stream; (ii) an acid recycle stream enriched in acetic acid with respect to the crude product stream; (iii) a mixed sidestream containing vinyl acetate and ethyl acetate, the mixed sidestream being enriched in ethyl acetate with respect to the vinyl acetate product stream; and (d) hydrogenating vinyl acetate in the mixed sidestream to provide an ethyl acetate product stream.
US07700791B2	Exothermic reaction system A reactor and heat exchanger assembly is provided with the heat exchanger integrally affixed to the reactor exit head and adapted to immediately cool reactor gases from the reactor.
US07700780B2	Zwitterionic chromophores and macromolecules containing such chromophores The invention disclosed relates to functionalized zwitterionic chromophores of structural formula III and III′. Wherein A is a linear or branched alkyl group having up to 20 carbon atoms and the desired functional groups, B is hydrogen, alkyl, aryl, halo, heterocyclic, alkoxy or nitro groups at 2, 3, 5 or 6 positions on the pyridine ring, C is hydrogen, aryl or a linear or branched alkyl group at 2′, 3′, 5′ or 6′ positions on the benzene ring, which has up to 70 carbon atoms and contains the desired functional group, D is a linear or branched alkyl, aryl or substituted aryl group, which has up to 70 carbon atoms and contains the desired functional group, R is C1-C4 alkyl or aryl, and m is an integer of from 0 to 4.
US07700779B2	Crystalline forms of fexofenadine and its hydrochloride The present invention is related to novel polymorph of Fexofenadine and Fexofenadine hydrochloride of formula 1 and process of preparation thereof. The present invention is also directed to provide pure novel polymorphs of Fexofenadine and its hydrochloride by a simple process which is cost effective, commercially viable and environment friendly.
US07700778B2	Acylated piperidine derivatives as melanocortin-4 receptor agonists Certain novel 4-substituted N-acylated piperidine derivatives are agonists of the human melanocortin receptor(s) and, in particular, are selective agonists of the human melanocortin-4 receptor (MC-4R). They are therefore useful for the treatment, control, or prevention of diseases and disorders responsive to the activation of MC-4R, such as obesity, diabetes, sexual dysfunction, including erectile dysfunction and female sexual dysfunction.
US07700768B2	Compounds Novel substituted pyrimido[4,5-d]pyrimidin-2-one compounds and compositions for use in therapy as CSBP/p38 kinase inhibitors.
US07700765B2	DNA minor groove binding compounds There is provided an oligopeptide compound comprising: (a) at least one nitrogen-containing basic group attached to at least one end of the oligopeptide; and (b) two or more heterocyclic monomers, at least one of which is substituted in the heterocyclic part by a branched, cyclic or part cyclic C3-5 alkyl group, or a pharmaceutically acceptable salt or solvate thereof; which compound, salt or solvate binds to the minor groove of DNA.
US07700760B2	RNA interference mediated inhibition of vascular cell adhesion molecule (VCAM) gene expression using short interfering nucleic acid (siNA) This invention relates to compounds, compositions, and methods useful for modulating vascular cell adhesion molecule gene expression using short interfering nucleic acid (siNA) molecules. This invention also relates to compounds, compositions, and methods useful for modulating the expression and activity of other genes involved in pathways of vascular cell adhesion molecule gene expression and/or activity by RNA interference (RNAi) using small nucleic acid molecules. In particular, the instant invention features small nucleic acid molecules, such as short interfering nucleic acid (siNA), short interfering RNA (siRNA), double stranded RNA (dsRNA), micro-RNA (miRNA), and short hairpin RNA (shRNA) molecules and methods used to modulate the expression of vascular cell adhesion molecule genes, such as vascular cell adhesion molecule-1 (VCAM-1).
US07700758B2	Methods and compositions relating to gene silencing A method for obtaining a mixture of heterogenous short double-stranded RNA molecules suitable for use in gene silencing (hsiRNA) by subjecting large double-stranded RNA to enzymatic cleavage under specified conditions. The resulting mixture consistently includes enhanced representation of fragments having a size of 21-22 nucleotides absent any fractionation step. The fragments contain sequences that collectively span the entire length of the large double-stranded RNA from which they are derived. Double-stranded RNA with sequences that individually represent segments of a target mRNA may be analyzed using the methods described herein to identify the most active subset of hsiRNA fragments or individual siRNA fragments for achieving gene silencing for any gene or transcribed sequences. A method is additionally provided for preparing and cloning DNA encoding selected siRNA, hsiRNA mixtures or hairpin sequences to provide a continuous supply of a gene silencing reagent derived from any long double-stranded RNA.
US07700740B2	Antibodies to CD83 The invention provides methods for modulating the immune system using anti-CD83 antibodies that can influence CD83 function.
US07700739B2	IL-12/p40 binding proteins The present invention encompasses IL-12p40 binding proteins, particularly antibodies that bind human interleukin-12 (hIL-12) and/or human IL-23 (hIL-23). Specifically, the invention relates to antibodies that are chimeric, CDR grafted and humanized antibodies. Preferred antibodies have high affinity for hIL-12 and/or hIL-23 and neutralize h IL-12 and/or hIL-23 activity in vitro and in vivo. An antibody of the invention can be a full-length antibody or an antigen-binding portion thereof. Method of making and method of using the antibodies of the invention are also provided. The antibodies, or antibody portions, of the invention are useful for detecting hIL-12 and/or hIL-23 and for inhibiting hIL-12 and/or hIL-23 activity, e.g., in a human subject suffering from a disorder in which hIL-12 and/or hIL-23 activity is detrimental.
US07700727B2	Compositions and kits for detecting pathogen infection The present invention generally features therapeutic and diagnostic compositions and methods for increasing or decreasing the binding of a lysozyme polypeptide to a Treponema pallidum P17 polypeptide (Tp17) or a Tp17-like polypeptide. More particularly, the invention relates to compositions and methods for detecting, treating, or preventing a pathogen infection or a chronic disorder; and to binding assays using a Tp17-like polypeptide and a lysozyme polypeptide.
US07700723B2	Polypeptides and encoding polynucleotides for microbial production of L-ascorbic acid and associated methods The present invention discloses an isolated polynucleotide molecule derived from a polynucleotide encoding a polypeptide having L-sorbosone dehydrogenase activity comprising a partial nucleotide sequence of at least 20 consecutive nucleotides of SEQ ID NO:1. The present invention further relates to a process for the production of L-ascorbic acid in high yield, in particular a process using resting cells of a microorganism able to convert given carbon sources into vitamin C. The thus obtained vitamin C may be further processed by purification and/or separation steps.
US07700718B2	Material for promoting the freezing of water or hydrous substance A novel material having ice nucleation activity or activity to promote freezing is provided. The present invention related to a carrier upon which polypeptides are immobilized for promoting the freezing of water or a hydrous substance. That is a carrier upon which polypeptides having side chains for binding to water molecules on the molecular surfaces of the polypeptides are integrated and immobilized; and a carrier upon which antifreeze proteins are integrated and immobilized.
US07700717B2	Photo-active backbone cyclized somatostatin analogs for photodynamic therapy and imaging Novel photo-active labeled diagnostic and therapeutic peptides which are conformationally constrained backbone cyclized somatostatin analogs, having improved somatostatin receptor subtype affinity and selectivity are disclosed. The backbone cyclized peptide analogs disclosed possess unique and superior properties over other analogs, such as chemical and metabolic stability, selectivity, increased bioavailability and improved pharmacokinetics. Furthermore, the unique patterns of receptor subtype selectivity provide compounds having improved diagnostic and therapeutic utilities. Pharmaceutical compositions comprising the photo-active backbone cyclized somatostatin analogs, reagents for synthesizing same, and methods of using such compositions for diagnostic and therapeutic purposes including optical imaging and photodynamic therapy are also disclosed.
US07700708B2	Ethylene polymer and application thereof to moldings An ethylene polymer containing 0.01 to 1.20 mol % of a constitutional unit derived from α-olefin having 6 to 10 carbon atoms, wherein with respect to cross fractionation chromatography (CFC), either (1) the weight average molecular weight (Mw) of the components eluted at 73 to 76° C. does not exceed 4,000, or (2) the ethylene polymer satisfies the following relationship (Eq-1), provides a molded product having excellent moldability and therefore excellent mechanical strength and appearance: Sx/Stotal≦0.1 (Eq-1) wherein Sx is the sum of the total peak areas related to the components eluted at 70 to 85° C., and Stotal is the sum of the total peak areas related to the components eluted at 0 to 145° C.
US07700705B2	Latex accelerator composition Accelerator composition for a rubber latex derived from a conjugated diene and optionally a vinyl aromatic comonomer comprising: (i) a diethyl dithiocarbamate (like e.g. ZDEC), and (ii) diphenylguanidine (DPG), and substantially free of any thiazole derivative, a curable aqueous synthetic rubber latex composition comprising said accelerator composition, and a process for the water-based solvent-free manufacture of synthetic shaped synthetic elastomeric articles, prepared by using said accelerator composition.
US07700702B2	High molecular weight associative amphoteric polymers and uses thereof High molecular weight associative amphoteric polymers for increasing the viscosity of aqueous solutions, comprise: at lease one cationic monomer derived from acrylamide bearing at least one hydrophobic chain of 8 to 30 carbon atoms; 1 to 99.9 mole % of at least one anionic monomer; and 1 to 99 mole % of one or several non-ionic water-soluble monomers. Aqueous solutions containing said polymers find uses in industry, in particular the oil, paper, water treatment, mining, cosmetics, textile, detergency industries and generally in all industrial techniques using thickened solutions.
US07700699B2	Polymerization process This invention is directed to processes of making polymer in the presence of a fluorinated hydrocarbon and recovering the polymer. The processes provided enable polymerization processes to be practiced with minimal fouling in the reaction system, and allows for the recovery of the fluorinated hydrocarbon and other hydrocarbons such as hydrocarbons for re-use in the process or hydrocarbon by-products from the polymerization process. The invention is particularly beneficial in the production of propylene polymers and copolymes using bulky ligand metallocene-type catalyst systems.
US07700697B2	Curable organosilicon composition and cured product thereof Provided is a curable organosilicon composition comprising (A) a polycyclic hydrocarbon group-containing organosilicon compound, which comprises two hydrogen atoms bonded to silicon atoms within each molecule, and is an addition reaction product of (a) an organosilicon compound having two hydrogen atoms bonded to silicon atoms within each molecule, and (b) a polycyclic hydrocarbon compound having two hydrosilylation reactive carbon-carbon double bonds within each molecule, (B) a siloxane-based compound having two or more alkenyl groups bonded to silicon atoms within each molecule, and (C) a hydrosilylation reaction catalyst. The curable organosilicon composition yields a cured product that has a high degree of hardness and excellent transparency, crack resistance and heat resistance, and is useful as a curable silicone material, an encapsulating material for optical devices such as optical elements, an encapsulating material for other electronic devices such as semiconductor elements, and an electrically insulating coating material.
US07700694B2	Catalyst composition and method for hydrogenating a polymer having a conjugated diene A catalyst composition and a method for hydrogenating a polymer having a conjugated diene are provided. The catalyst composition includes (a) a first composition having one of a bis(cyclopendienyl, fluorenyl, indenyl and derivatives thereof) titanium compound and a mixture thereof; (b) a second composition having one selected from the group consisting of a first compound of a formula (II), a second compound of a formula (III) and a mixture thereof: wherein the formula (II) has a chain structure, the formula (III) has a cyclic structure, the R is C1˜C12 alkyl, the X1 and X2 are ones selected from the group consisting of C1˜C12 alkyl, C1˜C12 cycloalkoxy, aryl, C1˜C12 alkyl aryl and carbonyl, and n>1 and m>2; and (c) a third composition having an organic metallic compound.
US07700692B2	Process for recycling polyolefin blend composition using an ethylene copolymer compatibilizing agent A process is provided for preparing polymer composites from compositions comprising i) a polyolefin, ii) a polymer selected from the group consisting of polymers having hydroxyl groups and polymers having amino groups and iii) a polar ethylene copolymer having copolymerized units selected from the group consisting of C4-C8 unsaturated anhydrides, monoesters of C4-C8 unsaturated acids having at least two carboxylic acid groups, diesters of C4-C8 unsaturated acids having at least two carboxylic acid groups and mixtures thereof. The process is suitable for use with recycle streams that contain polymeric materials that are laminates or composites of dissimilar polymers.
US07700690B2	Impact-resistant polyolefin compositions Polyolefin compositions comprising (percent by weight): 1) 55-80% of a crystalline propylene homopolymer or copolymer containing up to 15% of ethylene and/or C4-C10 α-olefin(s) and having an MFR value of at least 15 g/10 min, and 2) 2) 20-45 wt % of a copolymer of ethylene with one or more C4-C10 α-olefin(s) containing from 10 to 4 wt % of said C4-C10 α-olefin(s). The said compositions have values of MFR equal to or higher than 15 g/10 min, a total content of ethylene of 20% or more, a total content of C4-C10 α-olefin(s) of 4.5% or more, a ratio of the total content of ethylene to the total content of C4-C10 α-olefin(s) of 2.3 or more, and an intrinsic viscosity value of the fraction soluble in xylene at room temperature of 1.7 dl/g or less.
US07700688B2	Block copolymer composition and transparent elastomeric articles produced therefrom The present invention relates to a unique blend of elastomeric and thermoplastic monovinylidene aromatic-conjugated diene block copolymers, which form transparent elastomeric products.
US07700679B2	Heat-recoverable article and composition therefor A non-halogenated heat-recoverable article which passes the UL Standard for Safety for Extruded Insulating Tubing, UL 224, Fifth Edition, VW-1 flame test is prepared from a composition which contains polyethylene or an ethylene copolymer or a mixture, a hydrated or carbonated inorganic filler, red amorphous phosphorus, and an inorganic filler such as zinc borate. The article has good physical properties as measured by tensile strength and elongation, and good high temperature performance. A particularly useful article is heat-recoverable tubing which has good flame-retardancy as demonstrated by the VW-1 test.
US07700668B2	Adhesive composition with decreased polarity upon polymerization The invention relates to adhesive compositions that exhibit a significant decrease in polarity upon polymerization. More specifically, it relates to curable self etching dental adhesive compositions that can be applied to the tooth hard substance in one step and exhibit this decrease in polarity upon curing. In this respect a formulation is provided combining phosphoric acid esters bearing substituents with one ethylenically unsaturated moiety on the phosphorus atom and phosphoric acid esters bearing substituents with two or more ethylenically unsaturated moieties on the phosphorus atom.
US07700666B2	Composition containing a prepolymer and a crosslinker, process for producing and use thereof The invention relates to a curable composition comprising prepolymer (A) having the formula: (L-C(═O)—O—)nP wherein L is a group represented by the following formula with the N,N′ bridging unit being part of a heterocyclic quasi-aromatic ringsystem, optionally containing O, N or S, preferably an azolide, P is a prepolymer backbone having a molecular weight (Mn) of at least 500, n is at least 2, and crosslinker (B) comprising at least 3 nucleophilic groups. The curable composition can be used for coating, sealing, moulding, adhering, making impressions, especially in the dental field.
US07700664B2	Polymer compositions of carbonyl-hydrated ketone-aldehyde resins and polyisocyanates in reactive solvents The invention relates to polymer compositions of carbonyl-hydrogenated ketone-aldehyde resins and polyisocyanates in reactive solvents, to a process for their preparation and to the use, particularly in radiation-curable coating materials and adhesives.
US07700659B2	Implantable devices formed of non-fouling methacrylate or acrylate polymers Implantable devices formed of or coated with a material that includes a polymer having a non-fouling acrylate or methacrylate polymer are provided. The implantable device can be used for treating or preventing a disorder such as atherosclerosis, thrombosis, restenosis, hemorrhage, vascular dissection or perforation, vascular aneurysm, vulnerable plaque, chronic total occlusion, patent foramen ovale, claudication, anastomotic proliferation for vein and artificial grafts, bile duct obstruction, ureter obstruction, tumor obstruction, or combinations thereof.
US07700657B2	Vitamin D analogs Novel vitamin D analogs, markedly active in the fields of cell proliferation and differentiation, are selected from among (4E,6E)-7-{3-[2-(3,4-bis-hydroxymethylphenyl)-ethyl]phenyl}-3-ethylnona-4,6-dien-3-ol, (E)-6-[3-(3,4-bis-hydroxymethylbenzyloxy)phenyl]1,1,1-trifluoro-2-trifluoromethyloct-5-en-3-yn-2-ol, (3E,5E)-6-[3-(3,4-bis-hydroxymethylbenzyloxy)-phenyl]-1,1,1-trifluoro-2-trifluoromethylocta-3,5-dien-2-ol, (E)-6-{3-[2-(3,4-bis-hydroxymethylphenyl)ethyl]phenyl}-1,1,1-trifluoro-2-trifluoromethyloct-5-en-3-yn-2-ol, and (3E,5E)-6-{3-[2-(3,4-bis-hydroxymethylphenyl)-ethyl]phenyl-1,1,1-trifluoro-2-trifluoromethylocta-3,5-dien-2-ol, and the geometric isomers thereof and these compounds in which one or more of the hydroxyl functions are protected by a protective group —(C═O)—R, in which R is a linear or branched alkyl radical having from 1 to 6 carbon atoms, an aryl radical having from 6 to 10 carbon atoms, or an aralkyl radical having from 7 to 11 carbon atoms, the aryl radical or the aralkyl radical optionally being mono- or disubstituted by a hydroxy group, an alkoxy radical having from 1 to 3 carbon atoms, a halogen atom, a nitro function or by an amino function, and mixtures thereof.
US07700653B2	Halogen-substituted aminodicarboxylic acid derivatives This invention relates to methods for treating cardiovascular disorders selected from heart failure, thromboembolic disorders, venous diseases, and fibriotic disorders other than fibrosis of the liver, comprising administering an effective amount of a compound of formula (I) wherein the several variables are as defined in the specification and claims.
US07700649B2	Phosphaplatins and their use in the treatment of cancers resistant to cisplatin and carboplatin The present invention provides phosphaplatins, stable isolated monomeric phosphate complexes of platinum (II) and (IV), and methods of use thereof for treating cancers, including cisplatin- and carboplatin-resistant cancers. Unlike cisplatin, these complexes do not readily undergo hydrolysis and are quite soluble and stable in aqueous solutions. Moreover, these complexes—unlike cisplatin, carboplatin, and related platinum-based anti-cancer agents—do not bind DNA. Rather, data suggests that phosphaplatins trigger overexpression of fas and fas-related transcription factors and some proapoptotic genes such as Bak and Bax. Nevertheless, the complexes exhibit tremendous cytotoxicity towards cancer cells. Thus, the present invention provides novel platinum anticancer agents that have a different molecular target than those in the art.
US07700648B2	Ester compound and its use (5-Benzyl-3-furyl)methyl 2,2-dimethyl-3-((E)-2-cayano-3-methoxy-3-oxo-1-propenyl)cyclopropanecarboxylate has an excellent pesticidal activity, and a pesticidal composition comprising it as an active ingredient is useful for controlling pests.
US07700643B2	Polymerisable thieno[3,2-b]thiophenes The invention relates to novel polymerisable thieno[3,2-b]thiophenes, to their use as semiconductors or charge transport materials, in optical, electro-optical or electronic devices like for example liquid, crystal displays, optical films, organic field effect transistors (FET or OFET) for thin film transistor liquid crystal displays and integrated circuit devices such as RFID tags, electroluminescent devices in flat panel displays, and in photovoltaic and sensor devices, and to field effect transistors, light emitting devices or ID tags comprising the novel compounds.
US07700638B2	1,5,7-trisubstituted benzimidazole derivatives and their use for modulating the GABAA receptor complex This invention relates to novel 1,5,7-trisubstituted benzimidazole derivatives, pharmaceutical compositions containing these compounds, and methods of treatment therewith.The compounds of the invention are useful in the treatment of central nervous system diseases and disorders, which are responsive to modulation of the GABAA receptor complex.
US07700632B2	Biaryloxymethylarenecarboxylic acids as glycogen synthase activator The present invention relates to compounds of formula (I) wherein R1, R2, R3, R4, m, n, p and s are as defined in the description and claims, and pharmaceutically acceptable salts thereof. The compounds are useful for the treatment and/or prophylaxis of diseases that are associated with the activation of the glycogen synthase enzyme, such as diabetes.
US07700625B2	Hydroxybenzamide derivatives and their use as inhibitors of Hsp90 The invention provides compounds of the general formula (I) which have activity as Hsp90 inhibitors.
US07700624B2	3-aminocyclopentanecrboxamides as modulators of chemokine receptors The present invention is directed to compounds of Formula I: which are modulators of chemokine receptors. The compounds of the invention, and compositions thereof, are useful in the treatment of diseases related to chemokine receptor expression and/or activity.
US07700623B2	Arylamidine derivative, salt thereof, and antifungal containing these An arylamidine derivative represented by the general formula (wherein R1 represents optionally protected or substituted amidino; and R2 and R3 are the same or different and each represents hydrogen or halogeno) or a salt of the derivative. The derivative and salt have potent activity against fungi including ones having tolerance to azole type drugs and further have high safety and excellent properties in a repeated dose toxicity test. They are hence useful as an excellent antifungal.
US07700620B2	C-linked cyclic antagonists of P2Y1 receptor useful in the treatment of thrombotic conditions The present invention provides novel C-linked cyclic compounds and analogues of Formula (I): or a stereoisomer, tautomer, pharmaceutically acceptable salt or solvate form thereof, wherein the variables A, B, D and W are as defined herein. These compounds are selective inhibitors of the human P2Y1 receptor which can be used as medicaments.
US07700619B2	2-methoxymethyl-3-(3,4-dichlorophenyl)-8-azabicyclo[3.2.1]octane tartrate salts This invention relates to novel (1R,2R,3S,5S)-2-methoxymethyl-3-(3,4-dichlorophenyl)-8-azabicyclo[3.2.1]octane tartrate salts, such as L-tartrate monohydrates and anhydrates, wherein the salts are useful as monoamine neurotransmitter re-uptake inhibitors. Additionally, the invention also relates to the use of these salts in a method for therapy and to pharmaceutical compositions comprising the salts of the invention.
US07700618B2	Sulfonyl benzimidazole derivatives This invention relates to compounds of the formula (I): or a pharmaceutically acceptable salt thereof, wherein A, R1, R2, R3, R4, R5, m and n are each as described herein, and compositions containing such compounds, and the use of such compounds in the treatment of a condition mediated by CB2 receptor activity such as, but not limited to, inflammatory pain, nociceptive pain, neuropathic pain, fibromyalgia, chronic low back pain, visceral pain, acute cerebral ischemia, pain, chronic pain, acute pain, post herpetic neuralgia, neuropathies, neuralgia, diabetic neuropathy, HIV-related neuropathy, nerve injury, rheumatoid arthritic pain, osteoarthritic pain, back pain, cancer pain, dental pain, fibromyalgia, neuritis, sciatica, inflammation, neurodegenerative disease, cough, broncho constriction, irritable bowel syndrome (IBS), inflammatory bowel disease (IBD), colitis, cerebrovascular ischemia, emesis such as cancer chemotherapy-induced emesis, rheumatoid arthritis, asthma, Crohn's disease, ulcerative colitis, asthma, dermatitis, seasonal allergic rhinitis, GERD, constipation, diarrhea, functional gastrointestinal disorders, irritable bowel syndrome, cutaneous T cell lymphoma, multiple sclerosis, osteoarthritis, psoriasis, systemic lupus erythematosus, diabetes, glaucoma, osteoporosis, glomerulonephritis, renal ischemia, nephritis, hepatitis, cerebral stroke, vasculitis, myocardial infarction, cerebral ischemia, reversible airway obstruction, adult respiratory disease syndrome, COPD, cryptogenic fibrosing alveolitis and bronchitis.
US07700616B2	Compounds and amyloid probes thereof for therapeutic and imaging uses The present invention provides compounds and amyloid probes thereof that allow for an antemortem method of diagnosing AD and quantitating the extent or progression of amyloid deposits (plaques) by in vivo imaging of amyloid and/or amyloid deposits in the regions of the brain. Preferably, an amyloid probe of the invention can cross the blood-brain barrier and distinguish AD brain from normal brain. An amyloid probe can be administered to a patient in amounts suitable for in vivo imaging of amyloid deposits. Amyloid probes of the invention can also be used to detect and quantitate amyloid deposits in diseases including, without limitation, Down's syndrome, familial AD and homozygotes for the apolipoprotein E4 allele. In one aspect, the compounds may be used in the treatment or prophylaxis of diseases that include, without limitation, AD and type 2 diabetes mellitus. The compounds and amyloid probes of the invention include analogs, salts, pharmaceutical compositions, derivatives, prodrugs, racemic mixtures or tautomeric forms thereof.
US07700610B2	Use of tyrosine kinase inhibitors for treating allergic diseases The present invention relates to a method for treating allergic diseases such as asthma, comprising administering a tyrosine kinase inhibitor to a human in need of such treatment, more particularly a non-toxic, selective and potent c-kit inhibitor. Preferably, said inhibitor is unable to promote death of IL-3 dependent cells cultured in presence of IL-3.
US07700606B2	Imidazole amines as inhibitors of β-secretase The present invention provides a compound of formula I and the use thereof for the therapeutic treatment, prevention or amelioration of a disease or disorder characterized by elevated β-amyloid deposits or β-amyloid levels in a patient.
US07700605B2	2-cyano-pyrimidines and-triazines as cysteine protease inhibitors The invention relates to compounds of the formula I and salts thereof, to a process for their manufacture, to their use in the treatment of (especially cysteine protease, such as UCH-L3- and/or USP-2 dependent) diseases or for the manufacture of pharmaceutical formulations against these diseases, methods of treatment of warm-blooded animals comprising administering the compounds and/or their salts to said animals and pharmaceutical preparations, especially for the treatment of the diseases, comprising said compounds and/or salts.
US07700601B2	Substituted indazoles of formula 1.0 that are kinase inhibitors Disclosed is a compound of the formula: and the pharmaceutically acceptable salts thereof. Also disclosed are methods of treating protein kinase mediated diseases using the compound of formula 1.0. Also disclosed are methods of treating cancer using a compound of formula 1.0. The disclosed methods also include combination therapies wherein the compound of formula 1.0 is administered in combination with at least one addition pharmaceutically active ingredient.
US07700600B2	Methods for treating cardiac arrhythmia Disclosed are methods of preventing or treating cardiac arrhythmia comprising administering to a mammal in need thereof, such as a human, an effective amount of vanoxerine (GBR 12909) or a pharmaceutically acceptable salt, derivative or metabolite thereof.
US07700599B2	Gpr38 Receptor Agonists The invention relates to compounds of formula (I) processes for their preparation, pharmaceutical compositions containing them and their use in the treatment of conditions or disorders which are mediated via the GPR38 receptor.
US07700586B2	Arylsulfonamide derivatives for use as ccr3 antagonists in the treatment of inflammatory and immunological disorders The present invention relates to a sulfonamide derivative which is useful as an active ingredient of pharmaceutical preparations. The sulfonamide derivatives of the present invention have CCR3 (CC type chemokine receptor) antagonistic activity, and can be used for the prophylaxis and treatment of diseases associated with CCR3 activity, in particular for the treatment of asthma, atopic dermatitis, allergic rhinitis and other inflammatory/immunological disorders.
US07700581B2	Cephalosporin compounds comprising a C3 thio-methyl moiety substituted with N-containing heterocyclic group, and a C7 thiourea acetamido group, their preparations and uses thereof Disclosed herein are a cephalosporin compound of formula I, wherein R1 is selected from the following groups: wherein R2 is selected from the following groups: the preparation and uses thereof. A method of preparing the cephalosporin compound as disclosed herein comprises reacting a starting cephalosporin comprising a C7 amino group and a C3 thio-methyl moiety substituted with an N-containing heterocyclic group with bromoacetyl bromide and then with a N,N′-bissubstituted thiourea. Methods of treating an infectious disease are also disclosed, comprising administering to a patient in need thereof the pharmaceutical composition disclosed herein.
US07700580B2	Process for preparation of pharmaceutically pure anhydrous calcipotriol A process for the preparation of a pharmaceutical-grade anhydrous calcipotriol comprising: (a) dissolving crude calcipotriol having a water content of X% by weight in a first solvent or in a mixture of two or more first solvents, said first solvent or said mixture of two or more first solvents forming an azeotropic system with water, to obtain a solution of crude calcipotriol; (b) obtaining an intermediate calcipotriol by (i) placing said solution of crude calcipotriol under a reduced pressure and evaporating, if X is greater than or equal to 1, or (ii) crystallizing, if X is lower than 1; and (c) re-dissolving said intermediate calcipotriol in a second solvent or a mixture of two or more second solvents, said second solvent being anhydrous, and crystallizing at least once to obtain pharmaceutical-grade anhydrous calcipotriol.
US07700574B2	Modulation of RANKL expression Compounds, compositions and methods are provided for modulating the expression of RANKL. The compositions comprise oligonucleotides, targeted to nucleic acid encoding RANKL. Methods of using these compounds for modulation of RANKL expression and for diagnosis and treatment of disease associated with expression of RANKL are provided.
US07700568B2	Uses of DNA-PK This invention provides methods for increasing the susceptibility of cells to DNA-damaging agents, and for treating tumors in a subject, comprising introducing antisense that prevent expression of DNA dependent protein kinase catalytic subunit Ku70 or Ku80, wherein the antisense is in an amount sufficient to increase the sensitivity of the cells and tumors to heat, chemical, or radiation-induced DNA damage.
US07700567B2	Oligonucleotide analogues incorporating 5-aza-cytosine therein Oligonucleotide analogues are provided that incorporate 5-aza-cytosine in the oligonucleotide sequence, e.g., in the form of 5-aza-2′-deoxycytidine (decitabine) or 5-aza-cytidine. In particular, oligonucleotide analogues rich in decitabine-deoxyguanosine islets (DpG and GpD) are provided to target the CpG islets in the human genome, especially in the promoter regions of genes susceptible to aberrant hypermethylation. Such analogues can be used for modulation of DNA methylation, such as effective inhibition of methylation of cytosine at the C-5 position. Methods for synthesizing these oligonucleotide analogues and for modulating nucleic acid methylation are provided. Also provided are phosphoramidite building blocks for synthesizing the oligonucleotide analogues, methods for synthesizing, formulating and administering these compounds or compositions to treat conditions, such as cancer and hematological disorders.
US07700563B2	Synthetic heparin-binding factor analogs The invention provides synthetic heparin-binding growth factor analogs having at least one peptide chain, and preferably two peptide chains branched from a dipeptide branch moiety composed of two trifunctional amino acid residues, which peptide chain or chains bind a heparin-binding growth factor receptor and are covalently bound to a non-signaling peptide that includes a heparin-binding domain, preferably by a linker, which may be a hydrophobic linker. The synthetic heparin-binding growth factor analogs are useful as pharmaceutical agents, soluble biologics or as surface coatings for medical devices.
US07700555B2	Methods of treating diabetes The invention provides methods of screening for compounds that increase levels or activity of Aryl hydrocarbon Nuclear Receptor Translocator (ARNT) and/or Hypoxia Inducible Factor 1α (HIF1α), for the treatment and prevention of diabetes-related disorders, including type 1 and type 2 diabetes mellitus, impaired glucose tolerance, insulin resistance and beta cell dysfunction; compounds identified by said screening methods; and methods of using said compounds. Also included are methods for treating or preventing diabetes-related diseases using ARNT and/or HIF1α polypeptides and polynucleotides, and for using information regarding the expression, level or activity of ARNT and/or HIF1α in predictive medicine, e.g., diagnostic assays, prognostic assays, monitoring clinical trials, and pharmacogenetics.
US07700549B2	Exendin agonist analogs to treat diabetes Methods for treating conditions or disorders which can be alleviated by reducing food intake are disclosed which comprise administration of an effective amount of an exendin or an exendin agonist, alone or in conjunction with other compounds or compositions that affect satiety. The methods are useful for treating conditions or disorders, including obesity, Type II diabetes, eating disorders, and insulin-resistance syndrome. The methods are also useful for lowering the plasma glucose level, lowering the plasma lipid level, reducing the cardiac risk, reducing the appetite, and reducing the weight of subjects. Pharmaceutical compositions for use in the methods of the invention are also disclosed.
US07700547B2	Preventing airway mucus production by administration of EGF-R antagonists Hypersecretion of mucus in the lungs is inhibited by the administration of an epidermal growth factor receptor (EGF-R) antagonist. The EGF-R antagonist may be in the form of a small organic molecule, an antibody, or portion of an antibody that binds to and blocks the EGF receptor. The EGF-R antagonist is preferably administered by injection in an amount sufficient to inhibit formation of goblet cells in pulmonary airways. The degranulation of goblet cells that results in airway mucus production is thereby inhibited. Assays for screening candidate agents that inhibit goblet cell proliferation are also provided.
US07700546B2	Therapeutic agent for cancer The present invention provides a cancer therapeutic agent containing as an active ingredient a substance, particularly CRM197 which inhibits the binding of HB-EGF to EGF receptor by binding to HB-EGF, wherein a cancer is selected from the group consisting of a bladder cancer, a colon cancer or peritoneal metastatic cancers of a stomach cancer and a pancreatic cancer.
US07700544B2	Compositions and methods for treating atherosclerosis Peptides and mimetics of selected domains of mammalian serum amyloid A isoform 2.1 (SAA2.1) and compounds and compositions thereof are provided that enhance the effect on macrophage cholesterol ester hydrolase activity and/or inhibit acyl CoA:cholesterol acyl transferase activity. Methods of using these compositions in the treatment and/or prevention of atherosclerosis as well as coronary heart disease and cardiovascular disease are also provided.
US07700536B2	Foaming hard surface cleaner comprising a surfactant/solvent/dispersant mixture A foamable composition comprising: a) at least one anionic surfactant chosen from a salt of an alkyl sulfate and a salt of an alkyl ether sulfate in an amount of about 0.01 to about 1% by weight of the composition: b) at least one glycol ether in an amount of about 0.1 to about 1.5% by weight of the composition; c) at least one alcohol in an amount of about 2 to about 6% by weight of the composition; and d) water. Also, a foamable composition comprising: a) at least one anionic surfactant chosen from a salt of an alkyl sulfate and a salt of an alkyl ether sulfate; b) at least one glycol ether; c) at least one alcohol: and d) water, wherein the composition has a run down time of greater than about 15 seconds on a vertical glass surface across a distance of 10 cm.
US07700529B1	Isomers of bicyclo[2.2.1]hept-5-ene-2-carboxylic acid, ethyl ester and their use in perfume compositions The present invention is directed to a fragrance compound of bicyclo[2.2.1]hept-5-ene-2-carboxylic acid, ethyl ester: and its isomeric compounds.
US07700523B2	Nucleic acid binding polypeptide library The invention relates to a zinc finger polypeptide library in which each polypeptide comprises more than one zinc finger which has been at least partially randomized, and to a set of zinc finger polypeptide libraries which encode overlapping zinc finger polypeptides, each polypeptide comprising more than one zinc finger which has been at least partially randomized, and which polypeptide may be assembled after selection to form a multifinger zinc finger polypeptide.
US07700521B2	Platinum-copper fuel cell catalyst The present invention is directed to a composition for use as a catalyst in, for example, a fuel cell, the composition comprising platinum and copper, wherein the concentration of platinum is greater than 50 atomic percent and less than about 80 atomic percent, and further wherein the composition has a particle size which is less than 35 angstroms. The present invention is further directed to various methods for preparing such a composition.
US07700519B2	Catalyst for decomposing nitrous oxide and method for performing processes comprising formation of nitrous oxide The present invention relates to a catalyst comprising 0.1-10 mol % Co3-xMxO4, where M is Fe or Al and x=0-2, on a cerium oxide support for decomposition of N2O in gases containing NO. The catalyst may also contain 0.01-2 weight % ZrO2. The invention further comprises a method for performing a process comprising formation of N2O. The N2O containing gas is brought in contact with a catalyst comprising 0.1-10 mol % CO3-xMxO4, where M is Fe or Al and x=0-2, on a cerium oxide support, at 250-1000° C. The method may comprise that ammonia is oxidized in presence of an oxidation catalyst and that the thereby formed gas mixture is brought in contact with the catalyst comprising the cobalt component on cerium oxide support at a temperature of 500-1000° C.
US07700516B2	Methods of preparing a polymerization catalyst A method of preparing a catalyst comprising contacting a support with a trivalent titanium compound and a chromium-containing compound. A catalyst composition comprising a support, chromium, and titanium, wherein the titanium is derived from TiCl3, Ti2(SO4)3, Ti(OAc)3, Ti(+3) oxylate, Ti(NO3)3, Ti(+3) lactate or combinations thereof.
US07700498B2	Self-repair and enhancement of nanostructures by liquification under guiding conditions In accordance with the invention, the structure (10A, 10B) of a patterned nanoscale or near nanoscale device (“nanostructure”) is repaired and/or enhanced by liquifying the patterned device in the presence of appropriate guiding conditions for a period of time and then permitting the device to solidify. Advantageous guiding conditions include adjacent spaced apart or contacting surfaces (12, 13A, 13B) to control surface structure and preserve verticality and unconstrained boundaries to permit smoothing of edge roughness. In an advantageous embodiment, a flat planar surface (12) is disposed overlying a patterned nanostructure surface (13A, 13B) and the surface (13A, 13B) is liquified by a high intensity light source to repair or enhance the nanoscale features.
US07700497B2	Methods for fabricating residue-free contact openings A two-step via cleaning process that removes metal polymer and oxide polymer residues from a via with substantially no damage to the via or underlying structures on a semiconductor substrate. The via is formed through a dielectric layer and a barrier layer that are disposed over a metal-containing trace disposed on a semiconductor substrate. Sidewalls of the via may be coated with a residue layer including a distinct oxide polymer component and a distinct metal polymer component. The two-step via cleaning process comprises subjecting the residue layer to a nitric acid dip that removes the metal polymer component to expose the oxide polymer component. The oxide polymer component is then subjected to a phosphoric acid dip that removes the oxide polymer component. The oxide polymer and metal polymer residues may also be removed during the fabrication of the via by removing them directly after their respective formations.
US07700494B2	Low-pressure removal of photoresist and etch residue A method is provided for low-pressure plasma ashing to remove photoresist remnants and etch residues that are formed during preceding plasma etching of dielectric layers. The ashing method uses a two-step plasma process involving an oxygen-containing gas, where low or zero bias is applied to the substrate in the first cleaning step to remove significant amount of photoresist remnants and etch residues from the substrate, in addition to etching and removing detrimental fluoro-carbon residues from the chamber surfaces. An increased bias is applied to the substrate in the second cleaning step to remove the remains of the photoresist and etch residues from the substrate. A chamber pressure less than 20 mTorr is utilized in the second cleaning step. The two-step process reduces the memory effect commonly observed in conventional one-step ashing processes. A method of endpoint detection can be used to monitor the ashing process.
US07700490B2	Semiconductor manufacturing method for removing residue generated by dry etching A residue treatment system includes a treatment tank which treats residue with etching fluid, the residue being generated in a trench formed in an insulating film by dry etching; a measurement unit which measures a characteristic amount of the etching fluid; and a control unit which calculates treatment time for removing the residue on the basis of a value obtained by measuring the characteristic amount, the control unit calculating the treatment time by using correlation between an etching rate of the insulating film and the characteristic amount.
US07700488B2	Recycling of ion implantation monitor wafers A wafer processing method. The method includes providing a semiconductor wafer. The semiconductor wafer includes (i) a semiconductor layer and (ii) a dopant layer on top of the semiconductor layer. The dopant layer comprises dopants. The method further includes removing the dopant layer from the semiconductor wafer. No chemical etching is performed on the dopant layer before said removing the dopant layer is performed.
US07700479B2	Cleaning processes in the formation of integrated circuit interconnect structures A method for fabricating an integrated circuit includes providing a substrate, forming a low-k dielectric layer over the substrate, etching the low-k dielectric layer to form an opening in the low-k dielectric layer wherein an underlying metal is exposed through the opening, performing a remote plasma treatment to the substrate wherein a plasma used for the remote plasma treatment is generated from a plasma generator separated from a chamber in which the substrate is located, forming a diffusion barrier layer in the opening, and filling the opening with a conductive material. The method preferably includes an in-situ plasma treatment in a same chamber as the step of etching the low-k dielectric layer.
US07700478B2	Intermediate anneal for metal deposition The present teachings and illustrations describe a process for forming a plurality of conductive structures in or on a substrate. In one embodiment, the process comprises forming a plurality of recesses in or on the substrate, wherein the plurality of recesses include recesses having different dimensions. In addition, the process further comprises (i) forming a conductive layer which at least partially fills the plurality of recesses and (ii) treating the conductive layer to improve the conductive properties of the conductive layer. Moreover, the process still further comprises (iii) sequentially repeating acts (i) and (ii) until each of the recesses of the plurality of recesses are filled to a desired dimension and such that the conductive material in the recesses of smaller dimension are more uniformly adhered to the bottom surfaces of the recesses.
US07700477B2	Method for fabricating semiconductor device In a method for fabricating a semiconductor device, interconnect grooves are formed in an insulating film on a substrate, and then a copper film is formed on the insulating film to fill the interconnect grooves. Subsequently, portions of the copper film existing outside the interconnect grooves are polished to form interconnects, and then a cleaning process is performed on the resulting substrate. Thereafter, moisture remaining around a portion of the insulating film exposed between the interconnects is removed in a vacuum.
US07700475B1	Pillar structure on bump pad Substrates including conductive pads for coupling the substrates to a microelectronic device and/or package are described herein. Embodiments of the present invention provide substrates comprising one or more conductive pads including a base portion and a pillar portion, the pillar portion being configured to couple with a microelectronic device. According to various embodiments of the present invention, the substrate may be a printed circuit board and/or may be a carrier substrate incorporated into an electronic package. The pillar portion may facilitate interconnection between the substrate and a microelectronic device or package by effectively raising the height of the conductive pad. Other embodiments may be described and claimed.
US07700474B2	Barrier deposition using ionized physical vapor deposition (iPVD) An iPVD system uses a high density inductively coupled plasma (ICP) at high pressure of at least 50 mTorr to deposit uniform ultra-thin layer of a tantalum nitride material barrier material onto the sidewalls of high aspect ratio nano-size features on semiconductor substrates, preferably less than 2 nm thick with less than 4 nm in the field areas. The process includes depositing an ultra-thin TaN barrier layer having a high nitrogen concentration that produces high resistivity, preferably at least 1000 micro-ohm-cm. The ultra-thin TaN film is deposited by a low deposition rate process of less than 20 nm/minute, preferably 2-10 nm/min, to produce the high N/Ta ratio layer without nitriding the tantalum target. The layer provides a barrier to copper (Cu) diffusion and a high etch resistant etch-stop layer for subsequent deposition-etch processes.
US07700473B2	Gated semiconductor device and method of fabricating same A method for fabricating a gated semiconductor device, and the device resulting from performing the method. In a preferred embodiment, the method includes forming a hard mask for use in gate formation on one or more layers of alternately insulating and conducting material that have been formed on a substrate. The hard mask preferably includes three layers; a lower nitride layer, a middle oxide, and an upper nitride layer. In this embodiment, the middle oxide layer is formed with the rest of the hard mask, and then reduced in a lateral dimension, preferably using a DHF dip. A dielectric layer formed over the gate structure, including the hard mask, then etched back, self-aligns to be reduced-dimension oxide layer. In addition, where two conducting, that is gate layers are present, the lower layer is laterally reduced in dimension on at least one side to create an undercut.
US07700471B2	Methods of making semiconductor-based electronic devices on a wire and articles that can be made thereby Strands active electronic devices (AEDs), such as field-effect transistors, are made by processing a semiconductor substrate so that it yields a number of elongate semiconductor members liberated from the starting substrate. The elongate semiconductor members are secured to wires or wire-like structures so as to form semiconductor-member-on-a-wire composites upon which the AEDs are formed using various deposition and etching techniques. The AED strands have many uses, including the creating of electronic components, including flexible, conformal, rigid and foldable electronics, such as displays and sensors.
US07700469B2	Methods of forming semiconductor constructions Some embodiments include methods of forming semiconductor constructions. Oxide is formed over a substrate, and first material is formed over the oxide. Second material is formed over the first material. The second material may be one or both of polycrystalline and amorphous silicon. A third material is formed over the second material. A pattern is transferred through the first material, second material, third material, and oxide to form openings. Capacitors may be formed within the openings. Some embodiments include semiconductor constructions in which an oxide is over a substrate, a first material is over the oxide, and a second material containing one or both of polycrystalline and amorphous silicon is over the first material. Third, fourth and fifth materials are over the second material. An opening may extend through the oxide; and through the first, second, third, fourth and fifth materials.

1 2 3 4 5 6 7 8 9